Study guide
8.1 Movement Tracking Systems: GNSS/GPS, LPS, IMUs, and Optical Tracking
NSCA Certified Performance and Sport Scientist CPSS
Track your progress as you read
Finished sections get a check mark.
1 Introduction: CPSS Exam Overview, Eligibility, and Case-Study Strategy
1.1 CPSS Exam Format, Eligibility Pathways, and the 2026 Blueprint 1.2 Mastering Athlete Case Studies and Research Review Scenarios
2 Chapter 1: Scientific Process, Adaptation Theory, and Periodization (Domain 1)
2.1 Training Principles, Adaptation Models, and Injury-Risk Mitigation 2.2 Evaluating Performance Programs Using the Scientific Process 2.3 Periodization Paradigms, Fitness-Fatigue Models, and Tapering
3 Chapter 2: Scientific Disciplines in Athlete Preparation (Domain 1)
3.1 Exercise Physiology, Bioenergetics, and Systemic Adaptations 3.2 Applied Biomechanics, Force-Time Kinetics, and Force-Velocity Profiling 3.3 Motor Learning, Skill Acquisition, and Constraints-Led Practice Design 3.4 Performance Nutrition, Recovery Modalities, and Sport Psychology
4 Chapter 3: Technology Review, Research Appraisal, and Knowledge Translation (Domain 1)
4.1 Critically Reviewing Sport Performance Products, Technologies, and Trends 4.2 Evaluating Research Studies: Design, Validity, and Practical Relevance 4.3 Communicating Research Findings to Support Evidence-Based Practice
5 Chapter 4: Sport Demands Analysis, KPIs, and Resource Strategy (Domain 2)
5.1 Researching Biomechanical, Tactical, and Technical Sport Demands 5.2 Physiological Demands, Injury Epidemiology, and Environmental Constraints 5.3 Qualitative and Mixed-Methods Research for Sport Demands Analysis 5.4 Collaborating with Stakeholders to Establish Key Performance Indicators 5.5 Identifying Resources and Strategies for Short- and Long-Term Goals
6 Chapter 5: Profiling Benchmarks and Needs Analysis Communication (Domain 2)
6.1 Developing Normative Benchmarks: Z-Scores, T-Scores, and Percentiles 6.2 Multidimensional Athlete Profiling and Return-to-Performance Milestones 6.3 Communicating Needs Analysis Results to Multidisciplinary Stakeholders
7 Chapter 6: Assessment Ethics, Safety Standards, and Tool Psychometrics (Domain 3)
7.1 Ethical, Legal, and Privacy Considerations in Athlete Data Collection 7.2 Evaluating Assessment Environments, Equipment, and Safety Standards 7.3 Validity, Reliability (ICC, CV%, TE), and Smallest Worthwhile Change
8 Chapter 7: Applied Assessment and Load-Monitoring Systems (Domain 3)
8.1 Movement Tracking Systems: GNSS/GPS, LPS, IMUs, and Optical Tracking 8.2 Neuromuscular Testing: Force Platforms, Isometric Pulls/Pushes, and VBT 8.3 Internal Load, Autonomic Readiness (HRV), Biomarkers, and PROMs
9 Chapter 8: Quality Assurance, Protocols, and Assessment Efficacy (Domain 3)
9.1 Applying Quality Assurance Techniques in Sport Science Data Collection 9.2 Developing, Documenting, and Standardizing Data Collection Protocols 9.3 Systematically Reevaluating Assessments, Protocols, and Interventions
10 Chapter 9: Data Governance, Storage Architecture, and Cleaning (Domain 4)
10.1 Data Privacy, Security Protocols, and Protecting Organizational Information 10.2 Designing Plans for Data Collection, Storage, Analysis, and AMS Workflows 10.3 Evaluating Data Quality, Signal Integrity, Outliers, and Cleaning Procedures
11 Chapter 10: Statistical Modeling, Feedback Delivery, and Analytical Limitations (Domain 4)
11.1 Inferential Statistics, Correlation, Regression, ANOVA, and Effect Sizes 11.2 Longitudinal Load Modeling: ACWR, EWMA, Monotony, Strain, and Change Detection 11.3 Data Visualization, Dashboard Design, and Timely Stakeholder Feedback 11.4 Communicating Analytical Limitations, Bias, and Uncertainty
8.1 Movement Tracking Systems: GNSS/GPS, LPS, IMUs, and Optical Tracking
Key Takeaways Explain This Topic AI
Doppler-shift carrier frequency processing provides substantially lower error for instantaneous velocity and acceleration in GNSS receivers than numerical differentiation of noisy positional coordinates
Signal quality in outdoor GNSS tracking depends on satellite count and geometric dispersion, where a Horizontal Dilution of Precision (HDOP) below 1.0 indicates ideal sky geometry and values above 1.5 signal degraded precision from stadium multipath reflections
Local Positioning Systems (LPS) operating on Ultra-Wideband (UWB) radio frequencies (20 to 1,000 Hz) deliver centimeter-level spatial accuracy indoors and under enclosed stadium roofs using Time Difference of Arrival (TDOA) or Two-Way Ranging (TWR)
Tri-axial Inertial Measurement Units (IMUs) sample at 100 to 1,000 Hz to quantify three-dimensional jerk via PlayerLoad and capture non-locomotor mechanical demands such as collisions, tackles, jumps, and tight-space decelerations
Individualizing velocity zones to Maximal Sprint Speed (MSS), Maximal Aerobic Speed (MAS), and the Anaerobic Speed Reserve (ASR) prevents the physiological misclassification inherent to fixed absolute speed thresholds, while standardizing minimum effort dwell time (0.5 to 1.0 s) is essential for consistent longitudinal sprint and acceleration counts
Last updated: October 2026
8.1 Movement Tracking Systems: GNSS/GPS, LPS, IMUs, and Optical Tracking
Quantifying external locomotor and mechanical load in team, court, and field sports requires selecting an Electronic Performance and Tracking System ( EPTS \text{EPTS} EPTS ) that matches the physical environment, movement velocity, and spatial precision demands of the sport. Within the Needs Analysis and Assessment Selection framework (Domain 3, Task 3B), a sport scientist must understand the underlying physics, sampling frequencies, signal-processing filters, and error profiles of four primary tracking architectures: Global Navigation Satellite Systems ( GNSS \text{GNSS} GNSS ) , Local Positioning Systems ( LPS \text{LPS} LPS ) , Inertial Measurement Units ( IMUs \text{IMUs} IMUs ) , and Optical Computer-Vision Tracking .
- Comparing Athlete Tracking Architectures (EPTS)
- 1. Global Navigation Satellite Systems (GNSS / GPS, 10 – 18 Hz 10\text{–}18\text{ Hz} 10 – 18 Hz )
Wearable satellite tracking units are worn in a tight neoprene or elastic harness positioning the receiver between the upper scapulae over the thoracic spine ( T 1 – T 4 T_1\text{–}T_4 T 1 – T 4 ) to minimize upper-limb artifact while maintaining sky visibility. While legacy devices relied exclusively on the U.S. Global Positioning System ( GPS \text{GPS} GPS ) constellation at 1 Hz 1\text{ Hz} 1 Hz or 5 Hz 5\text{ Hz} 5 Hz , contemporary professional sports units are multi-constellation GNSS \text{GNSS} GNSS receivers sampling at 10 Hz 10\text{ Hz} 10 Hz to 18 Hz 18\text{ Hz} 18 Hz that simultaneously lock onto multiple satellite networks ( GPS , Russian GLONASS , European Galileo , and Chinese BeiDou ). Note that some devices marketed at " 15 Hz 15\text{ Hz} 15 Hz " have produced satellite fixes at a lower rate (for example, 5 Hz 5\text{ Hz} 5 Hz ) and filled the gaps by interpolating with accelerometer data. Always check the raw GNSS fix rate; true 10 Hz 10\text{ Hz} 10 Hz units are the usual validated benchmark for field sports.
A foundational technical distinction in GNSS \text{GNSS} GNSS engineering is how instantaneous velocity and acceleration are derived:
Positional Differentiation ( v = Δ d / Δ t v = \Delta d / \Delta t v = Δ d /Δ t ): Calculating velocity by taking the first derivative of consecutive X - Y X\text{-}Y X - Y latitude/longitude coordinates (and acceleration via the second derivative) amplifies high-frequency spatial noise by an order of magnitude, rendering acceleration metrics highly unstable.
Doppler-Shift Velocity: Modern 10 – 18 Hz 10\text{–}18\text{ Hz} 10 – 18 Hz sport GNSS \text{GNSS} GNSS receivers measure the Doppler shift in the continuous carrier frequency of the arriving satellite radio wave caused by the relative motion of the athlete toward or away from each satellite. Doppler-derived velocity is vastly more accurate and exhibits a much lower Coefficient of Variation ( CV % \text{CV}\% CV % ) for instantaneous speed and acceleration than positional differentiation.
Environmental and Kinematic Limitations: GNSS \text{GNSS} GNSS radio signals travel approximately 20,200 km 20{,}200\text{ km} 20 , 200 km from medium Earth orbit and require unobstructed line-of-sight sky visibility. Signal validity depends on two diagnostic telemetry metrics that sport scientists must audit before accepting session data:
Number of Connected Satellites: Valid locomotor tracking requires a minimum of 8 to 12 + 8\text{ to }12+ 8 to 12 + satellites continuously locked.
Horizontal Dilution of Precision ( HDOP \text{HDOP} HDOP ): Quantifies the geometric dispersion of visible satellites across the sky (lower values are better). When satellites are clustered directly overhead rather than spread evenly across the horizon, triangulation error rises. An HDOP < 1.0 \text{HDOP} < 1.0 HDOP < 1.0 indicates ideal satellite geometry; values between 1.0 and 1.5 1.0\text{ and }1.5 1.0 and 1.5 are acceptable; and an HDOP > 1.5 – 2.0 \text{HDOP} > 1.5\text{–}2.0 HDOP > 1.5 – 2.0 indicates poor geometry where positional and velocity data become unreliable.
Near high overhanging stadium roofs or sunken bowls, satellite signals bounce off metal girders and concrete facades before reaching the athlete's receiver—a phenomenon called multipath error . Furthermore, even under open skies, 10 Hz 10\text{ Hz} 10 Hz GNSS \text{GNSS} GNSS exhibits elevated measurement error ( CV > 10 – 15 % \text{CV} > 10\text{–}15\% CV > 10 – 15% ) during rapid 180 ∘ 180^\circ 18 0 ∘ change-of-direction ( COD \text{COD} COD ) cuts , curved sprints, and short, explosive acceleration bursts exceeding 4.0 m ⋅ s − 2 4.0\text{ m}\cdot\text{s}^{-2} 4.0 m ⋅ s − 2 , systematically underestimating peak instantaneous acceleration compared to laser or radar guns.
2. Local Positioning Systems (LPS / Ultra-Wideband UWB, 20 – 1,000 Hz 20\text{–}1{,}000\text{ Hz} 20 – 1 , 000 Hz )
To overcome indoor signal blockage and stadium multipath degradation, Local Positioning Systems ( LPS \text{LPS} LPS ) replace orbiting satellites with a fixed array of radio-frequency ( RF \text{RF} RF ) anchor antennas mounted around the perimeter catwalks or rafters of an indoor arena or stadium. Modern LPS \text{LPS} LPS installations utilize Ultra-Wideband ( UWB \text{UWB} UWB ) frequencies ( 3.1 to 10.6 GHz 3.1\text{ to }10.6\text{ GHz} 3.1 to 10.6 GHz ) transmitting ultra-short nanosecond pulses across a wide spectrum ( ≥ 500 MHz \ge 500\text{ MHz} ≥ 500 MHz ). Unlike narrowband signals, UWB \text{UWB} UWB pulses resist multipath phase cancellation and penetrate human tissue and arena obstacles with minimal attenuation.
Athlete tags communicate with the perimeter basestations at 20 Hz 20\text{ Hz} 20 Hz to 1,000 Hz 1{,}000\text{ Hz} 1 , 000 Hz (commonly 20 to 100 Hz 20\text{ to }100\text{ Hz} 20 to 100 Hz per player when multiplexing a full squad) using one of two geometric triangulation methods:
Time Difference of Arrival ( TDOA \text{TDOA} TDOA ): Synchronized master and slave perimeter anchors measure the exact picosecond arrival-time differences of a signal emitted by the athlete's tag to compute hyperbolic intersection coordinates.
Two-Way Ranging ( TWR \text{TWR} TWR ): The anchor and athlete tag exchange round-trip timestamps to directly compute absolute distance without requiring sub-nanosecond wired synchronization across all perimeter receivers.
Strengths and Trade-offs: LPS \text{LPS} LPS provides centimeter-level positional accuracy ( < 10 – 20 cm < 10\text{–}20\text{ cm} < 10 – 20 cm ) and significantly lower error during rapid multidirectional cuts and instantaneous accelerations than GNSS \text{GNSS} GNSS . However, LPS \text{LPS} LPS requires expensive fixed infrastructure, meticulous laser-surveyed calibration of anchor coordinates, and cannot travel with the team to away venues or auxiliary training pitches unless identical hardware is installed.
3. Inertial Measurement Units (IMUs, 100 – 1,000 Hz 100\text{–}1{,}000\text{ Hz} 100 – 1 , 000 Hz )
Integrated inside virtually every modern GNSS \text{GNSS} GNSS / LPS \text{LPS} LPS vest pod—or worn as standalone sensors in indoor court sports, combat sports, swimming, and ice hockey—is a micro-electromechanical ( MEMS \text{MEMS} MEMS ) Inertial Measurement Unit ( IMU \text{IMU} IMU ) sampling between 100 Hz 100\text{ Hz} 100 Hz and 1,000 Hz 1{,}000\text{ Hz} 1 , 000 Hz . A 9-axis IMU \text{IMU} IMU integrates three orthogonal tri-axial sensors:
Tri-Axial Accelerometer: Measures linear acceleration and gravitational force (in g -units g\text{-units} g -units , where 1 g = 9.81 m ⋅ s − 2 1\text{ }g = 9.81\text{ m}\cdot\text{s}^{-2} 1 g = 9.81 m ⋅ s − 2 ) along the vertical ( Z Z Z ), mediolateral ( X X X ), and anteroposterior ( Y Y Y ) axes.
Tri-Axial Gyroscope: Measures angular velocity (in deg ⋅ s − 1 \text{deg}\cdot\text{s}^{-1} deg ⋅ s − 1 ) around the three axes—quantifying torso roll, pitch, and yaw during turns, tackles, and rotational throws.
Tri-Axial Magnetometer: Measures local geomagnetic flux to establish absolute compass heading/orientation (though highly susceptible to ferromagnetic distortion from steel beams or reinforced concrete floors indoors).
Because accelerometers capture high-frequency forces at 100 Hz 100\text{ Hz} 100 Hz regardless of satellite visibility, sport scientists use them to compute PlayerLoad (also termed BodyLoad or Dynamic Stress Load depending on manufacturer), which quantifies the instantaneous rate of change of acceleration ( three-dimensional jerk ) scaled for readability:
PlayerLoad t = ( a y , t − a y , t − 1 ) 2 + ( a x , t − a x , t − 1 ) 2 + ( a z , t − a z , t − 1 ) 2 100 \text{PlayerLoad}_{t} = \frac{\sqrt{(a_{y,t} - a_{y,t-1})^2 + (a_{x,t} - a_{x,t-1})^2 + (a_{z,t} - a_{z,t-1})^2}}{100} PlayerLoad t = 100 ( a y , t − a y , t − 1 ) 2 + ( a x , t − a x , t − 1 ) 2 + ( a z , t − a z , t − 1 ) 2
where a y a_{y} a y , a x a_{x} a x , and a z a_{z} a z represent anteroposterior, mediolateral, and vertical accelerations at consecutive 100 Hz 100\text{ Hz} 100 Hz sample points t t t and t − 1 t-1 t − 1 . Session PlayerLoad is the sum of these instantaneous values across the session. Crucially, through Kalman filtering and sensor fusion of the accelerometer and gyroscope, Inertial Movement Analysis ( IMA \text{IMA} IMA ) isolates micro-movements that occur with near-zero horizontal displacement—such as rugby scrums, American football line-of-scrimmage collisions, basketball vertical jumps, ice hockey body checks, and directional cutting vectors (classified on a 360 ∘ 360^\circ 36 0 ∘ clock face into forward accelerations, backward decelerations, and left/right cuts).
4. Optical / Computer Vision Tracking ( 25 – 60 Hz 25\text{–}60\text{ Hz} 25 – 60 Hz )
Multi-camera Optical Tracking Systems (e.g., Second Spectrum, Hawk-Eye, ChyronHego/TRACAB) use high-definition fixed cameras mounted around the stadium roof operating at 25 Hz 25\text{ Hz} 25 Hz to 60 Hz 60\text{ Hz} 60 Hz paired with deep-learning computer vision algorithms to track the center of mass (and increasingly 3D skeletal pose landmarks) of every player, official, and the ball simultaneously.
Strengths and Limitations: Optical tracking imposes zero wearable burden on athletes, eliminates device battery/downloading failures, and is the only modality that captures opponent formations and ball trajectories in a unified coordinate system during official matches. However, optical systems suffer from player occlusion and ID-swapping when multiple athletes converge in congested spaces (e.g., basketball paint, soccer corner kicks, rugby rucks), requiring human operators or algorithmic stitching that can smooth out peak instantaneous accelerations. Furthermore, optical cameras cannot measure non-locomotor mechanical impacts, isometric grappling, or vertical ground-contact shock, and data interchangeability error exists when merging match optical data with training GNSS \text{GNSS} GNSS data (optical tracking often records 5 – 12 % 5\text{–}12\% 5 – 12% higher or lower high-speed running distance than GNSS \text{GNSS} GNSS due to differing smoothing filters, requiring linear regression calibration equations).
Tracking Architecture Typical Sampling Rate Operating Environment Primary Strengths Key Limitations Best Applied Use Cases
GNSS / GPS 10 – 18 Hz 10\text{–}18\text{ Hz} 10 – 18 Hz Outdoor open-sky pitches Portable across pitches; Doppler velocity accuracy; scalable to large squads Fails indoors; degrades under stadium roofs ( HDOP > 1.5 \text{HDOP} > 1.5 HDOP > 1.5 , multipath); higher error in 180 ∘ 180^\circ 18 0 ∘ cuts and bursts > 4 m ⋅ s − 2 > 4\text{ m}\cdot\text{s}^{-2} > 4 m ⋅ s − 2 Outdoor field sports (soccer, rugby, football, field hockey, lacrosse)
LPS (UWB) 20 – 1,000 Hz 20\text{–}1{,}000\text{ Hz} 20 – 1 , 000 Hz Indoor arenas & roofed stadiums Centimeter spatial precision ( < 20 cm < 20\text{ cm} < 20 cm ); superior COD and instantaneous acceleration validity High fixed installation cost; requires venue survey calibration; non-portable to away venues Indoor court sports (basketball, handball, ice hockey) and enclosed stadiums
IMU (Accelerometer + Gyro) 100 – 1,000 Hz 100\text{–}1{,}000\text{ Hz} 100 – 1 , 000 Hz Universal (indoor, outdoor, water) Captures 3D jerk ( PlayerLoad \text{PlayerLoad} PlayerLoad ), collisions, jumps, and tight-space IMA \text{IMA} IMA vectors independent of satellites Cannot measure absolute pitch coordinates or long-distance running speed without GNSS \text{GNSS} GNSS / LPS \text{LPS} LPS fusion Collision/combat sports, court jump load, swimming turn kinematics, trunk/tibial shock
Optical / Computer Vision 25 – 60 Hz 25\text{–}60\text{ Hz} 25 – 60 Hz Fixed broadcast stadiums/arenas Zero wearable compliance; tracks all players, opponents, and ball for joint physical-tactical analysis Occlusion/ID swapping in scrums; misses isometric/collision forces; systematic offset vs. GNSS \text{GNSS} GNSS Official league match analysis, integrated tactical-locomotor profiling
- Absolute vs. Relative (Individualized) Speed & Acceleration Thresholds
- The Flaw of Fixed Absolute Velocity Bands
By convention, many sports organizations categorize locomotor volume using fixed absolute speed thresholds —for example, defining High-Speed Running ( HSR \text{HSR} HSR ) as distance covered above 5.5 m ⋅ s − 1 5.5\text{ m}\cdot\text{s}^{-1} 5.5 m ⋅ s − 1 ( 19.8 km ⋅ h − 1 19.8\text{ km}\cdot\text{h}^{-1} 19.8 km ⋅ h − 1 ) and Sprinting as distance above 7.0 m ⋅ s − 1 7.0\text{ m}\cdot\text{s}^{-1} 7.0 m ⋅ s − 1 ( 25.2 km ⋅ h − 1 25.2\text{ km}\cdot\text{h}^{-1} 25.2 km ⋅ h − 1 ) . While absolute bands allow practitioners to compare external work against historical positional match benchmarks, they introduce severe physiological and mechanical misclassification across heterogeneous athletes:
Overestimation in Fast Athletes: For an elite winger with a Maximal Sprint Speed ( MSS \text{MSS} MSS ) of 10.0 m ⋅ s − 1 10.0\text{ m}\cdot\text{s}^{-1} 10.0 m ⋅ s − 1 ( 36.0 km ⋅ h − 1 36.0\text{ km}\cdot\text{h}^{-1} 36.0 km ⋅ h − 1 ) , crossing 7.0 m ⋅ s − 1 7.0\text{ m}\cdot\text{s}^{-1} 7.0 m ⋅ s − 1 represents only 70 % 70\% 70% of MSS \text{MSS} MSS —an aerobic/submaximal striding velocity that imposes minimal eccentric hamstring strain.
Underestimation in Slower or Youth/Female Cohorts: For a tighthead prop, interior lineman, or youth athlete with an MSS \text{MSS} MSS of 7.6 m ⋅ s − 1 7.6\text{ m}\cdot\text{s}^{-1} 7.6 m ⋅ s − 1 ( 27.4 km ⋅ h − 1 27.4\text{ km}\cdot\text{h}^{-1} 27.4 km ⋅ h − 1 ) , running at 6.8 m ⋅ s − 1 6.8\text{ m}\cdot\text{s}^{-1} 6.8 m ⋅ s − 1 represents 89.5 % 89.5\% 89.5% of MSS \text{MSS} MSS —a near-maximal neuromuscular effort imposing substantial biceps femoris mechanical strain—yet an absolute 7.0 m ⋅ s − 1 7.0\text{ m}\cdot\text{s}^{-1} 7.0 m ⋅ s − 1 filter records zero sprint distance and zero sprint efforts .
Individualizing Thresholds via MSS, MAS, and Anaerobic Speed Reserve (ASR)
To reflect true relative physiological and biomechanical strain, sport scientists anchor velocity zones to individual physiological landmarks:
Maximal Sprint Speed ( MSS \text{MSS} MSS ) Anchoring: Sprinting is individualized to ≥ 85 % \ge 85\% ≥ 85% or ≥ 90 % MSS \ge 90\%\ \text{MSS} ≥ 90% MSS , and High-Speed Running to 65 – 85 % MSS 65\text{–}85\%\ \text{MSS} 65 – 85% MSS . Every athlete is periodically assessed via 30 – 40 m 30\text{–}40\text{ m} 30 – 40 m timing gates, radar, or validated peak match GNSS \text{GNSS} GNSS speed to keep their MSS \text{MSS} MSS anchor current.
Maximal Aerobic Speed ( MAS \text{MAS} MAS ) & Anaerobic Speed Reserve ( ASR \text{ASR} ASR ): Derived from an incremental aerobic test or time trial (e.g., 1,200 m 1{,}200\text{ m} 1 , 200 m shuttle test), MAS \text{MAS} MAS represents the lowest running speed at which V ˙ O 2 max \dot{V}\text{O}_{2\max} V ˙ O 2 m a x occurs (typically 4.2 – 5.2 m ⋅ s − 1 4.2\text{–}5.2\text{ m}\cdot\text{s}^{-1} 4.2 – 5.2 m ⋅ s − 1 ). The difference between an athlete's mechanical ceiling ( MSS \text{MSS} MSS ) and aerobic ceiling ( MAS \text{MAS} MAS ) defines their Anaerobic Speed Reserve :
ASR = MSS − MAS \text{ASR} = \text{MSS} - \text{MAS} ASR = MSS − MAS
Two athletes with identical MAS \text{MAS} MAS ( 4.8 m ⋅ s − 1 4.8\text{ m}\cdot\text{s}^{-1} 4.8 m ⋅ s − 1 ) but different MSS \text{MSS} MSS ( 8.8 vs. 10.0 m ⋅ s − 1 8.8\text{ vs. }10.0\text{ m}\cdot\text{s}^{-1} 8.8 vs. 10.0 m ⋅ s − 1 ) possess vastly different ASR \text{ASR} ASR capacities ( 4.0 vs. 5.2 m ⋅ s − 1 4.0\text{ vs. }5.2\text{ m}\cdot\text{s}^{-1} 4.0 vs. 5.2 m ⋅ s − 1 ). Prescribing supramaximal high-intensity interval conditioning as a percentage of ASR \text{ASR} ASR (e.g., v = MAS + 0.30 × ASR v = \text{MAS} + 0.30 \times \text{ASR} v = MAS + 0.30 × ASR ) equalizes anaerobic glycolytic strain and time-to-exhaustion across both locomotor profiles.
Minimum Effort Dwell Time (Duration Threshold) and Signal Filtering
Whether using absolute or relative thresholds, a discrete "effort" (such as a sprint > 7.0 m ⋅ s − 1 > 7.0\text{ m}\cdot\text{s}^{-1} > 7.0 m ⋅ s − 1 or a high-intensity acceleration > 3.0 m ⋅ s − 2 > 3.0\text{ m}\cdot\text{s}^{-2} > 3.0 m ⋅ s − 2 ) is only logged by EPTS \text{EPTS} EPTS software if the athlete maintains the velocity or acceleration above the threshold for a user-defined minimum effort dwell time (duration threshold) —typically set between 0.5 s 0.5\text{ s} 0.5 s and 1.0 s 1.0\text{ s} 1.0 s .
Setting the dwell time too short ( < 0.2 – 0.3 s < 0.2\text{–}0.3\text{ s} < 0.2 – 0.3 s ) causes brief trunk-lean oscillations or Doppler noise spikes to register as false-positive acceleration efforts.
Conversely, changing the software dwell time setting from 0.5 s 0.5\text{ s} 0.5 s to 1.0 s 1.0\text{ s} 1.0 s (or updating manufacturer firmware that alters the Exponential Moving Average [ EMA \text{EMA} EMA ] velocity filter window from 0.2 s 0.2\text{ s} 0.2 s to 0.8 s 0.8\text{ s} 0.8 s ) can reduce recorded high-acceleration and sprint counts by 30 – 55 % 30\text{–}55\% 30 – 55% within the exact same raw session file! Consequently, sport scientists must strictly lock dwell-time durations, minimum inter-effort recovery intervals, and firmware smoothing filters across longitudinal seasons.