Study guide

8.2 Neuromuscular Testing: Force Platforms, Isometric Pulls/Pushes, and VBT

NSCA Certified Performance and Sport Scientist CPSS

Track your progress as you read

Finished sections get a check mark.

1 Introduction: CPSS Exam Overview, Eligibility, and Case-Study Strategy

1.1 CPSS Exam Format, Eligibility Pathways, and the 2026 Blueprint 1.2 Mastering Athlete Case Studies and Research Review Scenarios

2 Chapter 1: Scientific Process, Adaptation Theory, and Periodization (Domain 1)

2.1 Training Principles, Adaptation Models, and Injury-Risk Mitigation 2.2 Evaluating Performance Programs Using the Scientific Process 2.3 Periodization Paradigms, Fitness-Fatigue Models, and Tapering

3 Chapter 2: Scientific Disciplines in Athlete Preparation (Domain 1)

3.1 Exercise Physiology, Bioenergetics, and Systemic Adaptations 3.2 Applied Biomechanics, Force-Time Kinetics, and Force-Velocity Profiling 3.3 Motor Learning, Skill Acquisition, and Constraints-Led Practice Design 3.4 Performance Nutrition, Recovery Modalities, and Sport Psychology

4 Chapter 3: Technology Review, Research Appraisal, and Knowledge Translation (Domain 1)

4.1 Critically Reviewing Sport Performance Products, Technologies, and Trends 4.2 Evaluating Research Studies: Design, Validity, and Practical Relevance 4.3 Communicating Research Findings to Support Evidence-Based Practice

5 Chapter 4: Sport Demands Analysis, KPIs, and Resource Strategy (Domain 2)

5.1 Researching Biomechanical, Tactical, and Technical Sport Demands 5.2 Physiological Demands, Injury Epidemiology, and Environmental Constraints 5.3 Qualitative and Mixed-Methods Research for Sport Demands Analysis 5.4 Collaborating with Stakeholders to Establish Key Performance Indicators 5.5 Identifying Resources and Strategies for Short- and Long-Term Goals

6 Chapter 5: Profiling Benchmarks and Needs Analysis Communication (Domain 2)

6.1 Developing Normative Benchmarks: Z-Scores, T-Scores, and Percentiles 6.2 Multidimensional Athlete Profiling and Return-to-Performance Milestones 6.3 Communicating Needs Analysis Results to Multidisciplinary Stakeholders

7 Chapter 6: Assessment Ethics, Safety Standards, and Tool Psychometrics (Domain 3)

7.1 Ethical, Legal, and Privacy Considerations in Athlete Data Collection 7.2 Evaluating Assessment Environments, Equipment, and Safety Standards 7.3 Validity, Reliability (ICC, CV%, TE), and Smallest Worthwhile Change

8 Chapter 7: Applied Assessment and Load-Monitoring Systems (Domain 3)

8.1 Movement Tracking Systems: GNSS/GPS, LPS, IMUs, and Optical Tracking 8.2 Neuromuscular Testing: Force Platforms, Isometric Pulls/Pushes, and VBT 8.3 Internal Load, Autonomic Readiness (HRV), Biomarkers, and PROMs

9 Chapter 8: Quality Assurance, Protocols, and Assessment Efficacy (Domain 3)

9.1 Applying Quality Assurance Techniques in Sport Science Data Collection 9.2 Developing, Documenting, and Standardizing Data Collection Protocols 9.3 Systematically Reevaluating Assessments, Protocols, and Interventions

10 Chapter 9: Data Governance, Storage Architecture, and Cleaning (Domain 4)

10.1 Data Privacy, Security Protocols, and Protecting Organizational Information 10.2 Designing Plans for Data Collection, Storage, Analysis, and AMS Workflows 10.3 Evaluating Data Quality, Signal Integrity, Outliers, and Cleaning Procedures

11 Chapter 10: Statistical Modeling, Feedback Delivery, and Analytical Limitations (Domain 4)

11.1 Inferential Statistics, Correlation, Regression, ANOVA, and Effect Sizes 11.2 Longitudinal Load Modeling: ACWR, EWMA, Monotony, Strain, and Change Detection 11.3 Data Visualization, Dashboard Design, and Timely Stakeholder Feedback 11.4 Communicating Analytical Limitations, Bias, and Uncertainty

8.2 Neuromuscular Testing: Force Platforms, Isometric Pulls/Pushes, and VBT

Key Takeaways Explain This Topic AI

Accurate force-plate Countermovement Jump (CMJ) numerical integration requires at least 1.0 second of motionless quiet standing before movement onset (defined as a 5 SD drop below system weight) and at least a 1,000 Hz sampling frequency

Jump height calculated via the Impulse-Momentum theorem (h = v_takeoff² / 2g) is superior to the Flight-Time method (h = 1/8 g t²) because athletes often flex their hips, knees, and ankles before landing, artificially prolonging flight time

Time-sensitive CMJ strategy metrics—such as Reactive Strength Index Modified (RSImod = Jump Height / Time to Takeoff) and Flight Time:Contraction Time (FT:CT)—are substantially more sensitive to acute 24 to 72-hour neuromuscular fatigue than jump height alone

Standardized Isometric Mid-Thigh Pull (IMTP) testing requires a 125° to 145° knee angle, a 140° to 150° hip angle, lifting straps to eliminate grip limitation, minimal steady pretension without a > 50 N countermovement dip, and the cue to push the ground as fast and hard as possible

In Velocity-Based Training (VBT), terminating sets at a 10% to 20% intra-set velocity loss preserves fast-twitch Type IIx/IIa motor unit characteristics and maximizes RFD/sprint transfer while minimizing metabolic fatigue compared to 30% to 40%+ velocity loss thresholds

Last updated: October 2026

8.2 Neuromuscular Testing: Force Platforms, Isometric Pulls/Pushes, and VBT

Monitoring neuromuscular function, maximal force capacity, and explosive rate of force development ( RFD \text{RFD} RFD ) requires laboratory-grade instrumentation applied with strict biomechanical standardization. Under Domain 3, Task 3B , the sport scientist must master three cornerstone neuromuscular assessment paradigms: Dual-Force-Plate Countermovement Jump ( CMJ \text{CMJ} CMJ ) Phase Analysis , Multi-Joint Isometric Strength Testing ( IMTP \text{IMTP} IMTP ) , and Velocity-Based Training ( VBT \text{VBT} VBT ) Load-Velocity Profiling .

Dual-Force-Plate Countermovement Jump (CMJ) Phase Deconstruction ( ≥ 1,000 Hz \ge 1{,}000\text{ Hz} ≥ 1 , 000 Hz )

Hardware, Sampling Frequency, and the Critical Weighing Phase

Valid kinetic analysis of the Countermovement Jump ( CMJ \text{CMJ} CMJ ) requires uniaxial or triaxial strain-gauge or piezoelectric dual force platforms sampling at ≥ 1,000 Hz \ge 1{,}000\text{ Hz} ≥ 1 , 000 Hz mounted on a rigid, level surface (concrete slab or recessed steel frame; never over compressible rubber gym flooring that dampens high-frequency force transients). Dual plates independently record vertical ground reaction forces ( F z , left F_{z,\text{left}} F z , left ​ and F z , right F_{z,\text{right}} F z , right ​ ) to quantify both total system kinetics and bilateral inter-limb asymmetries.

Because force platforms measure force ( F z F_z F z ​ ) rather than position or velocity directly, center-of-mass ( COM \text{COM} COM ) velocity and displacement must be calculated via forward numerical integration of Newton's Second Law ( F z ( t ) − m g = m ⋅ a ( t ) F_z(t) - mg = m \cdot a(t) F z ​ ( t ) − m g = m ⋅ a ( t ) ):

a ( t ) = F z ( t ) − m ⋅ g m , v ( t ) = v 0 + ∫ t 0 t a ( τ ) d τ a(t) = \frac{F_z(t) - m \cdot g}{m}, \qquad v(t) = v_0 + \int_{t_0}^{t} a(\tau)\,d\tau a ( t ) = m F z ​ ( t ) − m ⋅ g ​ , v ( t ) = v 0 ​ + ∫ t 0 ​ t ​ a ( τ ) d τ

This mathematical dependency makes the Quiet Standing (Weighing) Phase the single most critical quality-control step in force-plate testing:

After zeroing (taring) the unloaded plates, the athlete steps onto the platforms with hands placed firmly on the iliac crests ( akimbo , eliminating variable upper-limb swing contribution when isolating lower-extremity neuromuscular status) and stands completely motionless for ≥ 1.0 s \ge 1.0\text{ s} ≥ 1.0 s before receiving the jump command.

During this 1.0 s 1.0\text{ s} 1.0 s window, the software calculates exact body weight ( m g mg m g ), derives system mass ( m = F ‾ z / g m = \overline{F}_z / g m = F z ​ / g ), sets initial velocity v 0 = 0 m ⋅ s − 1 v_0 = 0\text{ m}\cdot\text{s}^{-1} v 0 ​ = 0 m ⋅ s − 1 , and computes the standard deviation ( SD \text{SD} SD ) of baseline force noise.

Movement Onset Threshold: Unweighting onset is identified algorithmically when F z F_z F z ​ drops below system weight by 5 × SD 5 \times \text{SD} 5 × SD of the quiet standing force (with integration starting 30 ms 30\text{ ms} 30 ms prior to that threshold to capture true zero velocity). If the athlete rocks, shifts weight, or initiates a small upward heel-raise during the weighing phase, the calculated body mass m m m is corrupted and v 0 ≠ 0 v_0 \ne 0 v 0 ​  = 0 , causing integration drift that invalidates every subsequent velocity, power, and jump height value!

The Six Sequential Phases of the CMJ (McMahon et al., 2018)

Weighing (Quiet Standing) Phase: Motionless upright posture ( ≥ 1.0 s \ge 1.0\text{ s} ≥ 1.0 s ) where F z = m g F_z = mg F z ​ = m g , COM \text{COM} COM acceleration a = 0 a = 0 a = 0 , and COM \text{COM} COM velocity v = 0 m ⋅ s − 1 v = 0\text{ m}\cdot\text{s}^{-1} v = 0 m ⋅ s − 1 .

Unweighting Phase: Begins at movement onset ( F z < m g − 5 SD F_z < mg - 5\text{ SD} F z ​ < m g − 5 SD ) as the athlete relaxes hip, knee, and ankle extensors to drop the COM \text{COM} COM downward ( F z < m g F_z < mg F z ​ < m g , net impulse is negative). The unweighting phase ends at the exact instant F z F_z F z ​ rises back across body weight ( F z = m g F_z = mg F z ​ = m g ) —which mathematically coincides with peak negative (downward) COM \text{COM} COM velocity .

Braking (Eccentric) Phase: Runs from the instant of peak negative COM \text{COM} COM velocity ( F z = m g F_z = mg F z ​ = m g on the ascending force slope) until COM \text{COM} COM velocity decelerates to 0 m ⋅ s − 1 0\text{ m}\cdot\text{s}^{-1} 0 m ⋅ s − 1 at the bottom of the dip (maximum negative COM \text{COM} COM countermovement depth). To bring the downward-moving body to a complete halt, the net positive vertical impulse generated during the braking phase must exactly equal the magnitude of the negative impulse accumulated during the unweighting phase ( ∫ unweight ( F z − m g ) d t + ∫ braking ( F z − m g ) d t = 0 \int_{\text{unweight}} (F_z - mg)\,dt + \int_{\text{braking}} (F_z - mg)\,dt = 0 ∫ unweight ​ ( F z ​ − m g ) d t + ∫ braking ​ ( F z ​ − m g ) d t = 0 ).

Propulsive (Concentric) Phase: Begins the instant COM \text{COM} COM velocity crosses 0 m ⋅ s − 1 0\text{ m}\cdot\text{s}^{-1} 0 m ⋅ s − 1 (transition from eccentric flexion to concentric extension) and continues until takeoff (defined when F z F_z F z ​ falls below the flight-phase noise threshold, typically 10 – 20 N 10\text{–}20\text{ N} 10 – 20 N or 5 SD 5\text{ SD} 5 SD of unloaded flight noise). Peak concentric force and peak concentric power occur during this window.

Flight Phase: From takeoff until initial landing contact ( F z > 10 – 20 N F_z > 10\text{–}20\text{ N} F z ​ > 10 – 20 N ), during which the athlete is a projectile in freefall.

Landing Phase: From touchdown until COM \text{COM} COM velocity returns to 0 m ⋅ s − 1 0\text{ m}\cdot\text{s}^{-1} 0 m ⋅ s − 1 , quantifying eccentric impact absorption and bilateral landing force asymmetry.

Outcome Metrics vs. Strategy (Time-Based) Metrics for Fatigue Monitoring

First, sport scientists must configure software to compute Jump Height via the Impulse-Momentum theorem rather than Flight Time:

J net = ∫ t onset t takeoff ( F z ( t ) − m g ) d t = m ⋅ v takeoff ⟹ h IM = v takeoff 2 2 g J_{\text{net}} = \int_{t_{\text{onset}}}^{t_{\text{takeoff}}} (F_z(t) - mg)\,dt = m \cdot v_{\text{takeoff}} \implies h_{\text{IM}} = \frac{v_{\text{takeoff}}^2}{2g} J net ​ = ∫ t onset ​ t takeoff ​ ​ ( F z ​ ( t ) − m g ) d t = m ⋅ v takeoff ​ ⟹ h IM ​ = 2 g v takeoff 2 ​ ​

By contrast, the Flight-Time method ( h FT = 1 8 g t flight 2 h_{\text{FT}} = \frac{1}{8} g t_{\text{flight}}^2 h FT ​ = 8 1 ​ g t flight 2 ​ ) assumes the athlete's COM \text{COM} COM is at the exact same vertical height at takeoff (full triple extension) and touchdown. In practice, athletes subconsciously flex their hips and knees and dorsiflex their ankles while airborne just prior to landing, artificially prolonging t flight t_{\text{flight}} t flight ​ and overestimating jump height by a few centimetres while introducing high behavioral variability.

Second, when monitoring acute neuromuscular fatigue ( 24 – 72 hours 24\text{–}72\text{ hours} 24 – 72 hours after competition or heavy eccentric loading), Jump Height and Peak Power act as insensitive outcome metrics . Fatigued athletes frequently maintain their jump height by unconsciously altering their movement strategy —specifically increasing countermovement depth and lengthening their braking and propulsive durations ( Δ t \Delta t Δ t ) so that a lower average force ( F F F ) acting over a longer time ( Δ t \Delta t Δ t ) still generates the same net vertical impulse ( J = ∫ F d t J = \int F\,dt J = ∫ F d t )!

Therefore, time-sensitive strategy metrics are far more sensitive indicators of acute central and peripheral neuromuscular fatigue:

Reactive Strength Index Modified ( RSI mod \text{RSI}_{\text{mod}} RSI mod ​ ): RSI mod = Jump Height (m) Time to Takeoff (s) \text{RSI}_{\text{mod}} = \frac{\text{Jump Height (m)}}{\text{Time to Takeoff (s)}} RSI mod ​ = Time to Takeoff (s) Jump Height (m) ​ where Time to Takeoff ( TTT \text{TTT} TTT ) (also called Contraction Time ) spans from unweighting movement onset to takeoff.

Flight Time : Contraction Time Ratio ( FT:CT \text{FT:CT} FT:CT ): Divides airborne flight duration by Time to Takeoff ( t flight / TTT t_{\text{flight}} / \text{TTT} t flight ​ / TTT ).

Braking Phase Duration & Eccentric Deceleration RFD: Lengthening of the braking phase or a > 8 – 10 % > 8\text{–}10\% > 8 – 10% drop in RSI mod \text{RSI}_{\text{mod}} RSI mod ​ or FT:CT \text{FT:CT} FT:CT below individual baseline (exceeding the Smallest Worthwhile Change) reveals impaired stretch-shortening cycle ( SSC \text{SSC} SSC ) stiffness and neuromuscular fatigue even when jump height is 100 % 100\% 100% preserved.

Multi-Joint Isometric Strength Testing (IMTP & Isometric Squat)

When assessing maximal force-generating capacity and rapid neural drive without the mechanical fatigue or technical complexity of a 1-Repetition Maximum ( 1 RM 1\text{RM} 1 RM ), the Isometric Mid-Thigh Pull ( IMTP \text{IMTP} IMTP ) performed inside a rigid custom rack over dual force plates ( ≥ 1,000 Hz \ge 1{,}000\text{ Hz} ≥ 1 , 000 Hz ) is the gold-standard multi-joint assessment.

Strict Biomechanical Standardization of the IMTP

Small variations in joint angles drastically alter internal moment arms and Peak Force output. The athlete must be positioned to replicate the second-pull power position of the clean :

Knee Angle: 125 ∘ to 145 ∘ 125^\circ\text{ to }145^\circ 12 5 ∘ to 14 5 ∘ (measured via handheld goniometer, where 180 ∘ 180^\circ 18 0 ∘ = full extension).

Hip Angle: 140 ∘ to 150 ∘ 140^\circ\text{ to }150^\circ 14 0 ∘ to 15 0 ∘ , with an upright torso and shoulders positioned vertically over or slightly anterior to the bar.

Grip Elimination: Because hand/forearm grip strength fails well before maximal lower-extremity extensor force is reached, athletes must be secured to the bar using lifting straps and athletic tape .

Pretension & Countermovement Control: The athlete applies minimal steady pretension for ≥ 1.0 s \ge 1.0\text{ s} ≥ 1.0 s to remove mechanical slack from the body-bar linkage while maintaining a flat baseline force trace. Any downward countermovement dip > 50 N > 50\text{ N} > 50 N immediately before pulling utilizes the stretch-shortening cycle, invalidating the trial for Rate of Force Development ( RFD \text{RFD} RFD ) analysis.

Verbal Cueing: To capture both Peak Force ( PF \text{PF} PF ) and early/late RFD \text{RFD} RFD within the same 3 – 5 s 3\text{–}5\text{ s} 3 – 5 s trial, the practitioner must deliver the external focus cue: "Push the ground away as fast and as hard as possible." Cueing only "pull as hard as you can" can depress early RFD \text{RFD} RFD ( 0 – 100 ms 0\text{–}100\text{ ms} 0 – 100 ms ).

Key IMTP Metrics & the Dynamic Strength Index (DSI)

Peak Force ( PF \text{PF} PF ): Highest vertical force achieved during the 3 – 5 s 3\text{–}5\text{ s} 3 – 5 s pull (reported as Gross PF \text{PF} PF or Net PF = Gross PF − m g \text{PF} = \text{Gross PF} - mg PF = Gross PF − m g ), exhibiting exceptional reliability ( ICC ≥ 0.96 , CV < 3 % \text{ICC} \ge 0.96, \text{CV} < 3\% ICC ≥ 0.96 , CV < 3% ).

Time-Specific Force & RFD Epochs: Force at 100 ms , 150 ms , 200 ms , and 250 ms 100\text{ ms}, 150\text{ ms}, 200\text{ ms}, \text{and } 250\text{ ms} 100 ms , 150 ms , 200 ms , and 250 ms from pull onset, plus RFD \text{RFD} RFD ( Δ F / Δ t \Delta F / \Delta t Δ F /Δ t ) over 0 – 100 ms 0\text{–}100\text{ ms} 0 – 100 ms (reflecting motor unit recruitment threshold and firing frequency) and 0 – 200 ms 0\text{–}200\text{ ms} 0 – 200 ms (reflecting maximal cross-sectional area and musculo-tendinous stiffness). Note that time-specific force epochs ( F 100 ms , F 200 ms F_{100\text{ms}}, F_{200\text{ms}} F 100 ms ​ , F 200 ms ​ ) typically demonstrate better test-retest reliability ( CV ≈ 4 – 7 % \text{CV} \approx 4\text{–}7\% CV ≈ 4 – 7% ) than windowed RFD \text{RFD} RFD slopes.

Dynamic Strength Index ( DSI \text{DSI} DSI ): Also termed the Ballistic-to-Isometric Force Ratio: DSI = CMJ Peak Concentric Force IMTP Peak Force \text{DSI} = \frac{\text{CMJ Peak Concentric Force}}{\text{IMTP Peak Force}} DSI = IMTP Peak Force CMJ Peak Concentric Force ​ A DSI < 0.60 \text{DSI} < 0.60 DSI < 0.60 indicates the athlete can generate high maximal isometric force but can only express a small fraction of it during rapid ballistic movement ( ballistic/RFD deficit → \rightarrow → prioritize plyometrics and ballistic jump squats). Conversely, a DSI > 0.80 \text{DSI} > 0.80 DSI > 0.80 indicates the athlete utilizes nearly all of their available force ceiling ballistically ( maximal strength ceiling deficit → \rightarrow → prioritize heavy maximal strength training).

  • Velocity-Based Training (VBT) & Load-Velocity ( L - v L\text{-}v L - v ) Profiling
  • Comparing VBT Sensor Technologies

Linear Position Transducers ( LPTs \text{LPTs} LPTs , e.g., GymAware, T-Force): Attach a retractable physical tether to the barbell sleeve and measure cable displacement via high-precision rotary encoders. High-end LPTs \text{LPTs} LPTs incorporating an optical angle sensor to trigonometrically correct for horizontal anterior-posterior bar drift represent the practical field gold standard for validity and reliability.

Optoelectronic Camera / Infrared Systems (e.g., Velowin, Perch): Track barbell path optically without physical tethers; highly accurate inside a calibrated rack zone.

Barbell-Mounted IMU Accelerometers: Estimate velocity by numerically integrating tri-axial acceleration. Prone to integration drift, false or missed rep triggers, and substantially higher error ( CV > 8 – 15 % \text{CV} > 8\text{–}15\% CV > 8 – 15% ) during very slow grind repetitions ( < 0.30 m ⋅ s − 1 < 0.30\text{ m}\cdot\text{s}^{-1} < 0.30 m ⋅ s − 1 ) compared to LPTs \text{LPTs} LPTs .

Selecting the Right Velocity Metric: MV vs. MPV vs. PV

Mean Velocity ( MV \text{MV} MV ): Average upward velocity across the entire concentric phase. Ideal for moderate-to-heavy non-ballistic lifts ( > 70 % 1 RM > 70\%\ 1\text{RM} > 70% 1 RM ) where the braking phase is negligible.

Mean Propulsive Velocity ( MPV \text{MPV} MPV ): Average velocity during only the propulsive sub-phase where barbell acceleration is greater than or equal to gravitational acceleration ( a ≥ − 9.81 m ⋅ s − 2 a \ge -9.81\text{ m}\cdot\text{s}^{-2} a ≥ − 9.81 m ⋅ s − 2 ). During light-to-moderate non-ballistic lifts ( < 70 % 1 RM < 70\%\ 1\text{RM} < 70% 1 RM in the squat or bench press), athletes must actively decelerate the bar during the final 20 – 45 % 20\text{–}45\% 20 – 45% of the concentric range of motion so the bar does not launch off the shoulders or out of the hands. MPV \text{MPV} MPV excludes this mechanical braking phase , providing superior sensitivity for profiling submaximal non-ballistic velocities.

Peak Velocity ( PV \text{PV} PV ): Maximum instantaneous vertical velocity ( 5 – 10 ms 5\text{–}10\text{ ms} 5 – 10 ms window). PV \text{PV} PV is the mandatory metric for ballistic and Olympic weightlifting movements (jump squats, power cleans, snatches, hang pulls) where the athlete accelerates all the way through release or takeoff.

Individual Load-Velocity Profiling & Minimum Velocity Threshold (MVT)

When an athlete lifts every repetition with maximal concentric intent, relative load ( % 1 RM \%1\text{RM} %1 RM ) and concentric velocity follow a tight negative linear regression ( R 2 > 0.95 R^2 > 0.95 R 2 > 0.95 ). The Minimum Velocity Threshold ( MVT \text{MVT} MVT ) —the mean concentric velocity of the final successful repetition at 100 % 1 RM 100\%\ 1\text{RM} 100% 1 RM or muscular failure—is highly exercise-specific due to range of motion and sticking-point mechanics (e.g., Bench Press MVT ≈ 0.15 – 0.17 m ⋅ s − 1 \text{MVT} \approx 0.15\text{–}0.17\text{ m}\cdot\text{s}^{-1} MVT ≈ 0.15 – 0.17 m ⋅ s − 1 , Back Squat MVT ≈ 0.30 – 0.32 m ⋅ s − 1 \text{MVT} \approx 0.30\text{–}0.32\text{ m}\cdot\text{s}^{-1} MVT ≈ 0.30 – 0.32 m ⋅ s − 1 , Prone Bench Pull MVT ≈ 0.50 m ⋅ s − 1 \text{MVT} \approx 0.50\text{ m}\cdot\text{s}^{-1} MVT ≈ 0.50 m ⋅ s − 1 ). Crucially, an athlete's individual L - v L\text{-}v L - v slope and MVT \text{MVT} MVT remain stable even as their absolute 1 RM 1\text{RM} 1 RM changes, enabling daily autoregulation : measuring warm-up velocities at 50 – 80 % 1 RM 50\text{–}80\%\ 1\text{RM} 50 – 80% 1 RM estimates daily 1 RM 1\text{RM} 1 RM readiness so working loads can be adjusted by ± 2.5 – 5 % \pm 2.5\text{–}5\% ± 2.5 – 5% on the fly.

Intra-Set Velocity Loss (VL%) Cutoffs (Pareja-Blanco et al.)

Rather than prescribing a fixed number of repetitions per set, Velocity Loss ( VL % = v best − v rep v best × 100 \text{VL}\% = \frac{v_{\text{best}} - v_{\text{rep}}}{v_{\text{best}}} \times 100 VL % = v best ​ v best ​ − v rep ​ ​ × 100 ) terminates a set as soon as concentric velocity drops by a target percentage from the fastest repetition:

Velocity Zone / Parameter Velocity Range / Cutoff Primary Physiological & Neuromuscular Adaptation

Absolute Strength Zone 0.15 – 0.50 m ⋅ s − 1 0.15\text{–}0.50\text{ m}\cdot\text{s}^{-1} 0.15 – 0.50 m ⋅ s − 1 ( ≥ 80 – 85 % 1 RM \ge 80\text{–}85\%\ 1\text{RM} ≥ 80 – 85% 1 RM ) Maximal motor unit recruitment, high-threshold neural drive, maximal force ( F 0 F_0 F 0 ​ )

Accelerative Strength Zone 0.50 – 0.75 m ⋅ s − 1 0.50\text{–}0.75\text{ m}\cdot\text{s}^{-1} 0.50 – 0.75 m ⋅ s − 1 ( 65 – 80 % 1 RM 65\text{–}80\%\ 1\text{RM} 65 – 80% 1 RM ) Strength-speed maintenance and myofibrillar hypertrophy

Strength-Speed Zone 0.75 – 1.00 m ⋅ s − 1 0.75\text{–}1.00\text{ m}\cdot\text{s}^{-1} 0.75 – 1.00 m ⋅ s − 1 ( 45 – 65 % 1 RM 45\text{–}65\%\ 1\text{RM} 45 – 65% 1 RM ) Peak mechanical power output ( P max ⁡ P_{\max} P m a x ​ ) under moderate inertial resistance

Speed-Strength Zone 1.00 – 1.30 + m ⋅ s − 1 1.00\text{–}1.30+\text{ m}\cdot\text{s}^{-1} 1.00 – 1.30 + m ⋅ s − 1 ( < 45 % 1 RM < 45\%\ 1\text{RM} < 45% 1 RM ) Explosive early RFD \text{RFD} RFD and high-velocity ballistic force ( v 0 v_0 v 0 ​ )

Low Intra-Set Velocity Loss ( 10 – 20 % VL 10\text{–}20\%\ \text{VL} 10 – 20% VL ) Stop set at 10 – 20 % 10\text{–}20\% 10 – 20% drop from rep 1/2 Preserves fast-twitch MHC-IIx/IIa phenotype , maximizes RFD \text{RFD} RFD , sprint, and jump gains with minimal lactate/ammonia accumulation and rapid ( < 24 h < 24\text{ h} < 24 h ) recovery

High Intra-Set Velocity Loss ( 30 – 40 % + VL 30\text{–}40\%+\ \text{VL} 30 – 40% + VL ) Stop set near failure ( 30 – 40 % + 30\text{–}40\%+ 30 – 40% + drop) Induces high metabolic stress (lactate > 10 mmol ⋅ L − 1 > 10\text{ mmol}\cdot\text{L}^{-1} > 10 mmol ⋅ L − 1 , ammonia spikes), peripheral fatigue ( 48 – 72 h 48\text{–}72\text{ h} 48 – 72 h ), shifts MHC-IIx toward slower IIa, and gives somewhat greater hypertrophy but smaller jump gains (Pareja-Blanco et al., 2017)

Loading diagram... Six Sequential Phases of the Force-Plate Countermovement Jump (CMJ)