Study guide

3.2 Applied Biomechanics, Force-Time Kinetics, and Force-Velocity Profiling

NSCA Certified Performance and Sport Scientist CPSS

Track your progress as you read

Finished sections get a check mark.

1 Introduction: CPSS Exam Overview, Eligibility, and Case-Study Strategy

1.1 CPSS Exam Format, Eligibility Pathways, and the 2026 Blueprint 1.2 Mastering Athlete Case Studies and Research Review Scenarios

2 Chapter 1: Scientific Process, Adaptation Theory, and Periodization (Domain 1)

2.1 Training Principles, Adaptation Models, and Injury-Risk Mitigation 2.2 Evaluating Performance Programs Using the Scientific Process 2.3 Periodization Paradigms, Fitness-Fatigue Models, and Tapering

3 Chapter 2: Scientific Disciplines in Athlete Preparation (Domain 1)

3.1 Exercise Physiology, Bioenergetics, and Systemic Adaptations 3.2 Applied Biomechanics, Force-Time Kinetics, and Force-Velocity Profiling 3.3 Motor Learning, Skill Acquisition, and Constraints-Led Practice Design 3.4 Performance Nutrition, Recovery Modalities, and Sport Psychology

4 Chapter 3: Technology Review, Research Appraisal, and Knowledge Translation (Domain 1)

4.1 Critically Reviewing Sport Performance Products, Technologies, and Trends 4.2 Evaluating Research Studies: Design, Validity, and Practical Relevance 4.3 Communicating Research Findings to Support Evidence-Based Practice

5 Chapter 4: Sport Demands Analysis, KPIs, and Resource Strategy (Domain 2)

5.1 Researching Biomechanical, Tactical, and Technical Sport Demands 5.2 Physiological Demands, Injury Epidemiology, and Environmental Constraints 5.3 Qualitative and Mixed-Methods Research for Sport Demands Analysis 5.4 Collaborating with Stakeholders to Establish Key Performance Indicators 5.5 Identifying Resources and Strategies for Short- and Long-Term Goals

6 Chapter 5: Profiling Benchmarks and Needs Analysis Communication (Domain 2)

6.1 Developing Normative Benchmarks: Z-Scores, T-Scores, and Percentiles 6.2 Multidimensional Athlete Profiling and Return-to-Performance Milestones 6.3 Communicating Needs Analysis Results to Multidisciplinary Stakeholders

7 Chapter 6: Assessment Ethics, Safety Standards, and Tool Psychometrics (Domain 3)

7.1 Ethical, Legal, and Privacy Considerations in Athlete Data Collection 7.2 Evaluating Assessment Environments, Equipment, and Safety Standards 7.3 Validity, Reliability (ICC, CV%, TE), and Smallest Worthwhile Change

8 Chapter 7: Applied Assessment and Load-Monitoring Systems (Domain 3)

8.1 Movement Tracking Systems: GNSS/GPS, LPS, IMUs, and Optical Tracking 8.2 Neuromuscular Testing: Force Platforms, Isometric Pulls/Pushes, and VBT 8.3 Internal Load, Autonomic Readiness (HRV), Biomarkers, and PROMs

9 Chapter 8: Quality Assurance, Protocols, and Assessment Efficacy (Domain 3)

9.1 Applying Quality Assurance Techniques in Sport Science Data Collection 9.2 Developing, Documenting, and Standardizing Data Collection Protocols 9.3 Systematically Reevaluating Assessments, Protocols, and Interventions

10 Chapter 9: Data Governance, Storage Architecture, and Cleaning (Domain 4)

10.1 Data Privacy, Security Protocols, and Protecting Organizational Information 10.2 Designing Plans for Data Collection, Storage, Analysis, and AMS Workflows 10.3 Evaluating Data Quality, Signal Integrity, Outliers, and Cleaning Procedures

11 Chapter 10: Statistical Modeling, Feedback Delivery, and Analytical Limitations (Domain 4)

11.1 Inferential Statistics, Correlation, Regression, ANOVA, and Effect Sizes 11.2 Longitudinal Load Modeling: ACWR, EWMA, Monotony, Strain, and Change Detection 11.3 Data Visualization, Dashboard Design, and Timely Stakeholder Feedback 11.4 Communicating Analytical Limitations, Bias, and Uncertainty

3.2 Applied Biomechanics, Force-Time Kinetics, and Force-Velocity Profiling

Key Takeaways Explain This Topic AI

By the Impulse-Momentum Theorem, net vertical impulse divided by body mass strictly determines takeoff velocity and center-of-mass jump height, meaning athletes can alter jump strategy (peak force vs. contraction duration) while achieving identical jump heights

Early Rate of Force Development (0–100 ms) reflects maximal neural drive, motor unit firing rate, and doublet discharges, whereas late RFD (100–250 ms) is strongly governed by maximal muscle cross-sectional area, peak isometric strength, and tendon stiffness

Reactive Strength Index (RSI) and Modified RSI (RSImod = Jump Height / Time to Takeoff) differentiate fast stretch-shortening cycle mechanics (< 250 ms ground contact) from slow stretch-shortening cycle actions (> 250 ms)

Under the Samozino-Morin macroscopic Force-Velocity (F-v) model, two athletes with identical maximal power (Pmax = F0 * v0 / 4) can exhibit opposite F-v imbalances requiring either heavy force-dominant loading or ballistic/overspeed velocity-dominant training

The Dynamic Strength Index (DSI = Ballistic Peak Force / Isometric Peak Force) guides training emphasis: a DSI below 0.60 warrants ballistic and plyometric training, whereas a DSI above 0.80 warrants heavy maximal strength training to raise the force ceiling

Last updated: October 2026

Applied Biomechanics, Force-Time Kinetics, and Force-Velocity Profiling

Quick Answer: By the Impulse-Momentum Theorem ( ∫ F net d t = m ⋅ Δ v \int F_{\text{net}}\,dt = m \cdot \Delta v ∫ F net ​ d t = m ⋅ Δ v ), an athlete's takeoff velocity—and therefore jump height ( h = v takeoff 2 / 2 g h = v_{\text{takeoff}}^2 / 2g h = v takeoff 2 ​ /2 g )—is strictly determined by net vertical impulse divided by body mass . Force-time curve diagnostics separate Peak Force ( PF \text{PF} PF ) from Rate of Force Development ( RFD \text{RFD} RFD ) across early ( 0 – 100 ms 0\text{–}100\text{ ms} 0 – 100 ms , neural drive) and late ( 100 – 250 ms 100\text{–}250\text{ ms} 100 – 250 ms , structural strength) windows. Pairing Samozino-Morin Force-Velocity ( F - v F\text{-}v F - v ) profiling with the Dynamic Strength Index ( DSI = Ballistic PF / Isometric PF \text{DSI} = \text{Ballistic PF} / \text{Isometric PF} DSI = Ballistic PF / Isometric PF ) allows sport scientists to individualize training between maximal force ( > 0.80 DSI > 0.80\ \text{DSI} > 0.80 DSI or force deficit) and ballistic velocity/RFD ( < 0.60 DSI < 0.60\ \text{DSI} < 0.60 DSI or velocity deficit).

Sport biomechanics bridges mechanical physics and neuromuscular physiology. Rather than relying solely on outcome metrics (such as jump height in centimeters or sprint split time in seconds), a sport scientist analyzes the underlying kinetic strategies (how force is applied over time) and kinematic configurations (joint angles, velocities, and segment orientations) that produce those outcomes.

  • Linear and Angular Kinematics & Kinetics
  • Fundamental Mechanical Quantities

Linear Kinematics: Describes motion without reference to its causal forces: linear displacement ( Δ d \Delta d Δ d , in m \text{m} m ), linear velocity ( v = Δ d / Δ t v = \Delta d / \Delta t v = Δ d /Δ t , in m ⋅ s − 1 \text{m}\cdot\text{s}^{-1} m ⋅ s − 1 ), and linear acceleration ( a = Δ v / Δ t a = \Delta v / \Delta t a = Δ v /Δ t , in m ⋅ s − 2 \text{m}\cdot\text{s}^{-2} m ⋅ s − 2 ).

Newton's Laws of Motion and Force:

Law of Inertia ( 1 st 1\text{st} 1 st Law): A body remains at rest or in uniform linear velocity unless acted upon by an unbalanced external force.

Law of Acceleration ( 2 nd 2\text{nd} 2 nd Law): Net external force equals mass multiplied by acceleration ( F = m ⋅ a F = m \cdot a F = m ⋅ a , measured in Newtons, where 1 N = 1 kg ⋅ m ⋅ s − 2 1\text{ N} = 1\text{ kg}\cdot\text{m}\cdot\text{s}^{-2} 1 N = 1 kg ⋅ m ⋅ s − 2 ).

Law of Action-Reaction ( 3 rd 3\text{rd} 3 rd Law): For every force exerted by an athlete against the ground, the ground exerts an equal and opposite Ground Reaction Force ( GRF \text{GRF} GRF ) back onto the athlete.

Angular Kinetics and Torque ( τ \tau τ ): Human movement occurs via angular rotation of limb segments around joint axes, governed by Torque ( τ \tau τ , in N ⋅ m \text{N}\cdot\text{m} N ⋅ m ):

τ = F × d ⊥ \tau = F \times d_{\perp} τ = F × d ⊥ ​

where d ⊥ d_{\perp} d ⊥ ​ is the perpendicular moment arm —the shortest perpendicular distance from the joint's axis of rotation to the line of action of the muscle force (internal moment arm) or external resistance (external moment arm). Because internal muscle moment arms and sarcomere length-tension overlap change across a joint's range of motion while external barbell moment arms peak when limb segments are horizontal, multi-joint lifts exhibit biomechanical sticking regions . Modifying exercise selection (e.g., low-bar vs. high-bar back squat vs. front squat) systematically shifts the ratio of hip-to-knee external moment arms.

Mechanical Work and Power: Mechanical Work is the product of force and displacement along the direction of force ( W = F ⋅ d ⋅ cos ⁡ θ W = F \cdot d \cdot \cos\theta W = F ⋅ d ⋅ cos θ , in Joules, J \text{J} J ). Mechanical Power ( P P P , in Watts, W \text{W} W ) is the rate of doing mechanical work, or the instantaneous product of force and velocity:

  • P = W Δ t = F ⋅ v P = \frac{W}{\Delta t} = F \cdot v P = Δ t W ​ = F ⋅ v
  • The Impulse-Momentum Theorem: Why Net Impulse Governs Takeoff Velocity

Integrating Newton's Second Law ( F net = m ⋅ d v d t F_{\text{net}} = m \cdot \frac{dv}{dt} F net ​ = m ⋅ d t d v ​ ) with respect to time yields the Impulse-Momentum Theorem :

J net = ∫ t 1 t 2 F net ( t ) d t = F ˉ net ⋅ Δ t = m ⋅ v 2 − m ⋅ v 1 = m ⋅ Δ v J_{\text{net}} = \int_{t_1}^{t_2} F_{\text{net}}(t)\,dt = \bar{F}_{\text{net}} \cdot \Delta t = m \cdot v_2 - m \cdot v_1 = m \cdot \Delta v J net ​ = ∫ t 1 ​ t 2 ​ ​ F net ​ ( t ) d t = F ˉ net ​ ⋅ Δ t = m ⋅ v 2 ​ − m ⋅ v 1 ​ = m ⋅ Δ v

During a vertical jump on a force plate, the athlete must first overcome gravitational body weight ( m ⋅ g m \cdot g m ⋅ g ). Therefore, net vertical impulse ( J net J_{\text{net}} J net ​ ) is the time integral of vertical ground reaction force ( F z ( t ) F_z(t) F z ​ ( t ) ) minus body weight:

J net = ∫ t onset t takeoff ( F z ( t ) − m ⋅ g ) d t J_{\text{net}} = \int_{t_{\text{onset}}}^{t_{\text{takeoff}}} \left(F_z(t) - m \cdot g\right) dt J net ​ = ∫ t onset ​ t takeoff ​ ​ ( F z ​ ( t ) − m ⋅ g ) d t

Because the athlete starts the countermovement from stationary rest ( v onset = 0 m ⋅ s − 1 v_{\text{onset}} = 0\text{ m}\cdot\text{s}^{-1} v onset ​ = 0 m ⋅ s − 1 ), dividing net vertical impulse by body mass ( m m m ) strictly and uniquely determines takeoff velocity ( v takeoff v_{\text{takeoff}} v takeoff ​ ) , which in turn determines center-of-mass jump height ( h h h ) via projectile motion:

v takeoff = J net m ⟹ h = v takeoff 2 2 g v_{\text{takeoff}} = \frac{J_{\text{net}}}{m} \implies h = \frac{v_{\text{takeoff}}^2}{2g} v takeoff ​ = m J net ​ ​ ⟹ h = 2 g v takeoff 2 ​ ​

Critical Exam Insight: Because J net = F ˉ net ⋅ Δ t J_{\text{net}} = \bar{F}_{\text{net}} \cdot \Delta t J net ​ = F ˉ net ​ ⋅ Δ t , an athlete can achieve the exact same net impulse (and jump height) through two different biomechanical strategies: applying a higher average force over a shorter contraction time (desirable for sport readiness) or applying a lower average force over a prolonged countermovement duration (a classic compensatory strategy seen during neuromuscular fatigue or post-ACL reconstruction!). Monitoring jump height alone masks this fatigue compensation, whereas tracking Time to Takeoff and RSI mod \text{RSI}_{\text{mod}} RSI mod ​ exposes it immediately.

  • Force-Time Curve Analysis, RFD Windows, and Reactive Strength
  • Phases and Kinetic Metrics of the Countermovement Jump (CMJ)

A dual force plate recording (sampling at ≥ 1,000 Hz \ge 1{,}000\text{ Hz} ≥ 1 , 000 Hz ) partitions the CMJ \text{CMJ} CMJ into six sequential phases: (1) Quiet Weighing Phase ( ≥ 1 s \ge 1\text{ s} ≥ 1 s upright stillness to establish exact body weight m ⋅ g m \cdot g m ⋅ g and baseline noise), (2) Unweighting Phase (onset of movement where F z < m ⋅ g F_z < m \cdot g F z ​ < m ⋅ g up to peak negative center-of-mass velocity), (3) Braking (Eccentric Deceleration) Phase (from peak negative velocity until center-of-mass velocity reaches 0 m ⋅ s − 1 0\text{ m}\cdot\text{s}^{-1} 0 m ⋅ s − 1 at the bottom of the dip), (4) Propulsive (Concentric) Phase (from v = 0 v = 0 v = 0 until toe-off), (5) Flight Phase , and (6) Landing Phase .

Peak Force vs. Early and Late Rate of Force Development ( RFD \text{RFD} RFD )

While isometric mid-thigh pull ( IMTP \text{IMTP} IMTP ) Peak Force ( PF \text{PF} PF ) requires 300 – 600 ms 300\text{–}600\text{ ms} 300 – 600 ms to reach its plateau, fundamental sport skills occur within much briefer ground contact windows: maximal velocity sprinting ( 80 – 100 ms 80\text{–}100\text{ ms} 80 – 100 ms ), sprint acceleration ( 120 – 180 ms 120\text{–}180\text{ ms} 120 – 180 ms ), and agility cutting ( 150 – 250 ms 150\text{–}250\text{ ms} 150 – 250 ms ). Consequently, Rate of Force Development ( RFD = Δ F / Δ t \text{RFD} = \Delta F / \Delta t RFD = Δ F /Δ t , in N ⋅ s − 1 \text{N}\cdot\text{s}^{-1} N ⋅ s − 1 ) dictates how much force an athlete can express before foot-off:

Early RFD ( 0 – 100 ms 0\text{–}100\text{ ms} 0 – 100 ms from contraction onset): Governed predominantly by neural factors (supraspinal motor unit recruitment speed, maximal discharge rate / rate coding, doublet firing) and intrinsic myosin heavy chain ( MHC \text{MHC} MHC ) Type IIx/IIa isoform composition.

Late RFD ( 100 – 250 ms 100\text{–}250\text{ ms} 100 – 250 ms from contraction onset): Governed predominantly by structural and maximal strength factors , including physiological cross-sectional area ( CSA \text{CSA} CSA ), maximal voluntary isometric force capacity ( PF \text{PF} PF ), and series elastic aponeurotic/tendon stiffness .

Fast vs. Slow SSC and Reactive Strength Indices

Stretch-shortening cycle actions are classified by ground contact time ( GCT \text{GCT} GCT ):

Fast SSC ( < 250 ms < 250\text{ ms} < 250 ms ): Minimal hip and knee angular displacement, high leg stiffness, rapid amortization (e.g., drop jumps, pogo hops, maximal top-speed sprinting). Evaluated via the Reactive Strength Index ( RSI \text{RSI} RSI ) :

RSI = Jump Height (m) Ground Contact Time (s) or Flight Time (s) Ground Contact Time (s) \text{RSI} = \frac{\text{Jump Height (m)}}{\text{Ground Contact Time (s)}} \quad \text{or} \quad \frac{\text{Flight Time (s)}}{\text{Ground Contact Time (s)}} RSI = Ground Contact Time (s) Jump Height (m) ​ or Ground Contact Time (s) Flight Time (s) ​

Slow SSC ( > 250 ms > 250\text{ ms} > 250 ms ): Large angular displacement at the hip, knee, and ankle with longer force application windows (e.g., countermovement jump, basketball rebound, wide change-of-direction cut). Evaluated in the CMJ \text{CMJ} CMJ via the Modified Reactive Strength Index ( RSI mod \text{RSI}_{\text{mod}} RSI mod ​ ) :

RSI mod = Jump Height (m) Time to Takeoff (s) \text{RSI}_{\text{mod}} = \frac{\text{Jump Height (m)}}{\text{Time to Takeoff (s)}} RSI mod ​ = Time to Takeoff (s) Jump Height (m) ​

where Time to Takeoff ( TTT \text{TTT} TTT ) spans from the onset of unweighting ( 5 SD 5\text{ SD} 5 SD below system weight) to toe-off.

  • Force-Velocity ( F - v F\text{-}v F - v ) Profiling and Dynamic Strength Index ( DSI \text{DSI} DSI )
  • The Samozino–Morin Linear F - v F\text{-}v F - v and Parabolic P - v P\text{-}v P - v Framework

In multi-joint ballistic lower-limb extensions (measured across 3 – 5 3\text{–}5 3 – 5 incremental squat jump or CMJ \text{CMJ} CMJ loads from 0 % 0\% 0% to + 80 – 100 % +80\text{–}100\% + 80 – 100% body mass, or during a 30 – 40 m 30\text{–}40\text{ m} 30 – 40 m sprint acceleration via radar/laser velocity-time modeling), mean external force ( F F F ) and mean extension velocity ( v v v ) follow an inverse linear relationship :

F ( v ) = F 0 − S F v ⋅ v F(v) = F_0 - S_{Fv} \cdot v F ( v ) = F 0 ​ − S F v ​ ⋅ v

F 0 F_0 F 0 ​ ( N ⋅ kg − 1 \text{N}\cdot\text{kg}^{-1} N ⋅ kg − 1 ): Theoretical maximal force intercept extrapolated at zero velocity.

v 0 v_0 v 0 ​ ( m ⋅ s − 1 \text{m}\cdot\text{s}^{-1} m ⋅ s − 1 ): Theoretical maximal velocity intercept extrapolated at zero force.

S F v = − F 0 / v 0 S_{Fv} = -F_0 / v_0 S F v ​ = − F 0 ​ / v 0 ​ : The slope of the individual's linear Force-Velocity profile.

P max ⁡ P_{\max} P m a x ​ ( W ⋅ kg − 1 \text{W}\cdot\text{kg}^{-1} W ⋅ kg − 1 ): Maximal mechanical power output at the apex of the parabolic Power-Velocity curve ( F opt = 0.5 F 0 F_{\text{opt}} = 0.5\,F_0 F opt ​ = 0.5 F 0 ​ and v opt = 0.5 v 0 v_{\text{opt}} = 0.5\,v_0 v opt ​ = 0.5 v 0 ​ ):

P max ⁡ = F 0 ⋅ v 0 4 P_{\max} = \frac{F_0 \cdot v_0}{4} P m a x ​ = 4 F 0 ​ ⋅ v 0 ​ ​

Force-Velocity Imbalance ( F - v imb F\text{-}v_{\text{imb}} F - v imb ​ ): For any given body mass, push-off distance, and P max ⁡ P_{\max} P m a x ​ , there exists a unique optimal slope ( S F v , opt S_{Fv,\text{opt}} S F v , opt ​ ) that maximizes ballistic jump height or sprint acceleration. Comparing an athlete's actual slope ( S F v S_{Fv} S F v ​ ) against S F v , opt S_{Fv,\text{opt}} S F v , opt ​ reveals whether they have a Force Deficit ( S F v S_{Fv} S F v ​ flatter than optimal; low F 0 F_0 F 0 ​ , high v 0 v_0 v 0 ​ → \rightarrow → prescribe heavy resistance and force-dominant loading) or a Velocity Deficit ( S F v S_{Fv} S F v ​ steeper than optimal; high F 0 F_0 F 0 ​ , low v 0 v_0 v 0 ​ → \rightarrow → prescribe unloaded ballistic jumps, plyometrics, and assisted/overspeed training), even when two athletes display the exact same P max ⁡ P_{\max} P m a x ​ !

Dynamic Strength Index ( DSI \text{DSI} DSI / Strength Deficit)

The Dynamic Strength Index ( DSI \text{DSI} DSI ) compares an athlete's peak force produced during a fast ballistic movement ( CMJ \text{CMJ} CMJ or Squat Jump) against their maximal force ceiling during an Isometric Mid-Thigh Pull ( IMTP \text{IMTP} IMTP ):

DSI = Ballistic Peak Force (N) Isometric Peak Force (N) \text{DSI} = \frac{\text{Ballistic Peak Force (N)}}{\text{Isometric Peak Force (N)}} DSI = Isometric Peak Force (N) Ballistic Peak Force (N) ​

DSI < 0.60 \text{DSI} < 0.60 DSI < 0.60 : The athlete utilizes less than 60 % 60\% 60% of their maximal force ceiling during dynamic brief-contact actions → \rightarrow → prioritize ballistic, plyometric, and high-RFD velocity training .

DSI = 0.60 – 0.80 \text{DSI} = 0.60\text{–}0.80 DSI = 0.60 – 0.80 : Balanced dynamic force utilization → \rightarrow → prescribe concurrent mixed-methods strength-power training .

DSI > 0.80 \text{DSI} > 0.80 DSI > 0.80 : The athlete already expresses over 80 % 80\% 80% of their isometric ceiling dynamically → \rightarrow → prioritize heavy maximal strength training ( > 85 % 1RM > 85\%\text{ 1RM} > 85% 1RM ) to elevate the absolute force ceiling.

Worked Calculation Example: Impulse-Momentum & DSI Prescription

Consider two 90 kg 90\text{ kg} 90 kg rugby players tested on dual force plates ( g = 9.81 m ⋅ s − 2 g = 9.81\text{ m}\cdot\text{s}^{-2} g = 9.81 m ⋅ s − 2 ):

Athlete A generates a net vertical impulse J net = 270 N ⋅ s J_{\text{net}} = 270\text{ N}\cdot\text{s} J net ​ = 270 N ⋅ s during a CMJ \text{CMJ} CMJ , with CMJ Peak Force = 2,100 N \text{CMJ Peak Force} = 2{,}100\text{ N} CMJ Peak Force = 2 , 100 N and IMTP Peak Force = 3,800 N \text{IMTP Peak Force} = 3{,}800\text{ N} IMTP Peak Force = 3 , 800 N .

Athlete B also generates J net = 270 N ⋅ s J_{\text{net}} = 270\text{ N}\cdot\text{s} J net ​ = 270 N ⋅ s , with CMJ Peak Force = 2,610 N \text{CMJ Peak Force} = 2{,}610\text{ N} CMJ Peak Force = 2 , 610 N and IMTP Peak Force = 3,000 N \text{IMTP Peak Force} = 3{,}000\text{ N} IMTP Peak Force = 3 , 000 N .

Takeoff Velocity & Jump Height (Both Athletes): v takeoff = J net m = 270 N ⋅ s 90 kg = 3.00 m ⋅ s − 1 v_{\text{takeoff}} = \frac{J_{\text{net}}}{m} = \frac{270\text{ N}\cdot\text{s}}{90\text{ kg}} = 3.00\text{ m}\cdot\text{s}^{-1} v takeoff ​ = m J net ​ ​ = 90 kg 270 N ⋅ s ​ = 3.00 m ⋅ s − 1 h = v takeoff 2 2 g = ( 3.00 ) 2 2 × 9.81 = 9.00 19.62 = 0.459 m ( 45.9 cm ) h = \frac{v_{\text{takeoff}}^2}{2g} = \frac{(3.00)^2}{2 \times 9.81} = \frac{9.00}{19.62} = 0.459\text{ m} \ (45.9\text{ cm}) h = 2 g v takeoff 2 ​ ​ = 2 × 9.81 ( 3.00 ) 2 ​ = 19.62 9.00 ​ = 0.459 m ( 45.9 cm )

Dynamic Strength Index ( DSI \text{DSI} DSI ) Comparison:

Athlete A: DSI A = 2,100 / 3,800 = 0.55 \text{DSI}_A = 2{,}100 / 3{,}800 = 0.55 DSI A ​ = 2 , 100/3 , 800 = 0.55 ( < 0.60 < 0.60 < 0.60 ). Despite jumping 45.9 cm 45.9\text{ cm} 45.9 cm , Athlete A possesses a massive isometric force ceiling ( 3,800 N 3{,}800\text{ N} 3 , 800 N ) that they cannot access rapidly. Prescription: Prioritize ballistic squat jumps, plyometrics, and early-RFD training.

Athlete B: DSI B = 2,610 / 3,000 = 0.87 \text{DSI}_B = 2{,}610 / 3{,}000 = 0.87 DSI B ​ = 2 , 610/3 , 000 = 0.87 ( > 0.80 > 0.80 > 0.80 ). Athlete B expresses 87 % 87\% 87% of their force ceiling dynamically. Prescription: Prioritize heavy maximal strength training ( 85 – 95 % 1RM 85\text{–}95\%\text{ 1RM} 85 – 95% 1RM squats/pulls) to raise their IMTP \text{IMTP} IMTP ceiling.

Force-Velocity Zone Load (% 1RM) Mean Concentric Barbell Velocity Representative Exercises Primary Neuromuscular & Mechanical Target Optimal DSI / F-v Profile Target

Absolute Strength 85 – 100 % 1RM 85\text{–}100\%\text{ 1RM} 85 – 100% 1RM < 0.50 m ⋅ s − 1 < 0.50\text{ m}\cdot\text{s}^{-1} < 0.50 m ⋅ s − 1 Heavy Back Squat, Deadlift, Isometric Pull Maximal motor unit recruitment, F 0 F_0 F 0 ​ , late RFD DSI > 0.80 \text{DSI} > 0.80 DSI > 0.80 or Severe Force Deficit

Accelerative Strength 75 – 85 % 1RM 75\text{–}85\%\text{ 1RM} 75 – 85% 1RM 0.50 – 0.75 m ⋅ s − 1 0.50\text{–}0.75\text{ m}\cdot\text{s}^{-1} 0.50 – 0.75 m ⋅ s − 1 Submaximal Squat, Heavy Push Press, Heavy Sled High force at moderate velocity, myofibrillar CSA \text{CSA} CSA Moderate Force Deficit

Strength-Speed 45 – 75 % 1RM 45\text{–}75\%\text{ 1RM} 45 – 75% 1RM 0.75 – 1.00 m ⋅ s − 1 0.75\text{–}1.00\text{ m}\cdot\text{s}^{-1} 0.75 – 1.00 m ⋅ s − 1 Power Clean, Mid-Thigh Clean Pull, Loaded Jump Squat Peak mechanical power ( P max ⁡ P_{\max} P m a x ​ ) at heavy-moderate load Balanced Profile ( DSI 0.60 – 0.80 \text{DSI } 0.60\text{–}0.80 DSI 0.60 – 0.80 )

Speed-Strength 15 – 45 % 1RM 15\text{–}45\%\text{ 1RM} 15 – 45% 1RM 1.00 – 1.30 m ⋅ s − 1 1.00\text{–}1.30\text{ m}\cdot\text{s}^{-1} 1.00 – 1.30 m ⋅ s − 1 Light Trap-Bar Jump, Power Snatch, Med-Ball Throw Ballistic RFD, high-velocity power transfer Moderate Velocity Deficit

Starting / Reactive Speed 0 – 15 % 1RM 0\text{–}15\%\text{ 1RM} 0 – 15% 1RM (or Assisted) > 1.30 m ⋅ s − 1 > 1.30\text{ m}\cdot\text{s}^{-1} > 1.30 m ⋅ s − 1 Unloaded CMJ, Depth Jump, Band-Assisted Jump, Sprint Early RFD ( 0 – 100 ms 0\text{–}100\text{ ms} 0 – 100 ms ), v 0 v_0 v 0 ​ , fast SSC leg stiffness DSI < 0.60 \text{DSI} < 0.60 DSI < 0.60 or Severe Velocity Deficit