Study guide
10.2 Drafting Standards, Text Styles, and Title Block Preparation
NSPS Certified Survey Technician Level I Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Survey Types & Historical Development
1.1 CST Certification & Survey Licensing Distinction 1.2 Boundary, Cadastral, and Land Surveys 1.3 Topographic, Hydrographic, and Route Surveys 1.4 Construction, As-Built, and Industrial Alignment Surveys 1.5 Historical Surveying Units, Instruments, and Practices
2 Chapter 2: Tripods, Instruments & Field Setup
2.1 Tripod Setup, Centering, Plumbing, and Optical Plummets 2.2 Instrument Leveling, Bubble Vials, and Electronic Tilt Sensors 2.3 Equipment Care, Cleaning, Storage, and Transport Safety
3 Chapter 3: Taping, Leveling & Distance Measurement
3.1 Steel Taping, Tension, Temperature, and Slope Corrections 3.2 Differential Leveling Equipment, Rods, Targets, and Rod Reading 3.3 Total Station Operations, Prism Constants, and EDM Basics 3.4 Data Collectors, Field Software Jobs, and File Management
4 Chapter 4: Field Operations, Notes & Communication
4.1 Field Note Bookkeeping, Standard Layout, and Hand-Drawn Sketches 4.2 Field Radio Procedures, Hand Signals, and Crew Communications 4.3 Line Clearing, Brush Removal, and Obstacle Clearance Safety 4.4 Setting Field Monuments, Rebar, Caps, Stakes, and Tacks
5 Chapter 5: Survey Control Networks & Monuments
5.1 Horizontal & Vertical Control Principles and Monument Types 5.2 Benchmarks, Datums (NAVD88, NAD83), and Field Verification Checks
6 Chapter 6: Basic Surveying Mathematics & Unit Conversions
6.1 Linear & Angular Unit Conversions (Feet, Chains, Links, Acres, DMS, Radians) 6.2 Right Triangle Trigonometry and Geometry in Surveying 6.3 Approved Calculator Operations & Memory Management (Casio fx-115/991, HP 35s, TI-36X)
7 Chapter 7: Leveling & Distance Computations
7.1 Differential Leveling Computations (HI, Backsight, Foresight, Page Checks) 7.2 Slope Distance Reductions and Horizontal/Vertical Components 7.3 Elevation, Grade Percent, and Stationing Calculations
8 Chapter 8: Coordinate Geometry & Area Calculations
8.1 Bearings, Azimuths, and Angular Conversions 8.2 Rectangular Coordinates (Northings/Eastings) and Departure/Latitude Basics 8.3 Area Calculations (Triangles, Trapezoids, Rectangles, and Simple Polygons)
9 Chapter 9: Plan Reading, Scale & Topography
9.1 Map Types, Plan Sheets, Title Blocks, and Revision Blocks 9.2 Scale Conversions, Graphical Scales, and Dimension Verification 9.3 Contour Lines, Spot Elevations, Interpolation, and Profiles
10 Chapter 10: CAD & Drafting Conventions
10.1 CAD Layers, Line Types, Symbols, and Legend Standards 10.2 Drafting Standards, Text Styles, and Title Block Preparation 10.3 Coordinate Systems, Grid vs. Ground, and Plan Orientation
11 Chapter 11: Field Safety, Hazards & First Aid
11.1 Personal Protective Equipment (PPE) & Construction Site Safety 11.2 Traffic Control, Flaggers, and Roadway Work Zone Safety (MUTCD) 11.3 Environmental Hazards: Heat Stress, Cold Exposure, Poisonous Plants, and Animals 11.4 Electrical Hazards, Overhead Power Lines, and Excavation Safety 11.5 Basic First Aid, CPR Principles, and Emergency Response Protocols
10.2 Drafting Standards, Text Styles, and Title Block Preparation
Key Takeaways Explain This Topic AI
Plotted text height must be sized according to drawing scale factor to ensure minimum readable printed text heights (typically 0.10 inch / 2.5 mm for standard body text and dimensions).
Annotation scaling in modern CAD automatically manages text, dimension, and leader sizes across viewports plotted at different engineering scales.
Standard survey plan notes include General Notes (covering datums, basis of bearings, and sources) and Specific Callouts (identifying monuments and adjoiners).
Boundary curve tables systematically list horizontal curve parameters including delta angle, radius, arc length, chord length, and chord bearing.
Vicinity maps provide broad geographical context to locate the survey site within a regional road network, operating independently of the primary engineering plot scale.
Last updated: July 2026
10.2 Drafting Standards, Text Styles, and Title Block Preparation
A well-drafted survey plat communicates legal, spatial, and engineering information clearly to clients, municipal planning boards, contractors, and courtrooms. Beyond linework and symbols, text clarity, dimensioning precision, structured plan notes, curve data tables, and title block layout form the core framework of professional drafting standards.
Text Height and Readability at Plot Scale
Text in CAD model space must be sized relative to the intended plot scale so that when printed onto physical paper (e.g., Arch D 24 " × 36 " 24" \times 36" 24" × 36" or ANSI B 11 " × 17 " 11" \times 17" 11" × 17" ), all annotations are perfectly legible.
Plotted Paper Text Heights (Standard Rules of Thumb)
Minimum Legible Text (Minor Labels, Spot Heights) : 0.08 inches ( 2.0 mm ) 0.08 \text{ inches } (2.0 \text{ mm}) 0.08 inches ( 2.0 mm )
Standard Body Text (Dimensions, Callouts, General Text) : 0.10 inches ( 2.5 mm ) 0.10 \text{ inches } (2.5 \text{ mm}) 0.10 inches ( 2.5 mm )
Subheadings & Major Feature Callouts : 0.14 inches ( 3.5 mm ) 0.14 \text{ inches } (3.5 \text{ mm}) 0.14 inches ( 3.5 mm )
Sheet Titles & Title Block Project Name : 0.20 − 0.25 inches ( 5.0 − 6.0 mm ) 0.20 - 0.25 \text{ inches } (5.0 - 6.0 \text{ mm}) 0.20 − 0.25 inches ( 5.0 − 6.0 mm )
Model Space Text Height Formula
To compute the required text height in CAD model space, multiply the desired paper text height by the Drawing Scale Factor : Model Space Text Height = Plotted Text Height (inches) × Scale Factor \text{Model Space Text Height} = \text{Plotted Text Height (inches)} \times \text{Scale Factor} Model Space Text Height = Plotted Text Height (inches) × Scale Factor
Where Scale Factor is the number of real-world units per drawing unit (e.g., at 1 " = 50 ′ 1" = 50' 1" = 5 0 ′ , Scale Factor = 50 = 50 = 50 ).
- Engineering Plot Scale Drawing Scale Factor Desired Plotted Height Model Space Text Height
- 1 " = 10 ′ 1" = 10' 1" = 1 0 ′ 10 0.10 " 0.10" 0.10" 1.0 foot 1.0 \text{ foot} 1.0 foot
- 1 " = 20 ′ 1" = 20' 1" = 2 0 ′ 20 0.10 " 0.10" 0.10" 2.0 feet 2.0 \text{ feet} 2.0 feet
- 1 " = 30 ′ 1" = 30' 1" = 3 0 ′ 30 0.10 " 0.10" 0.10" 3.0 feet 3.0 \text{ feet} 3.0 feet
- 1 " = 40 ′ 1" = 40' 1" = 4 0 ′ 40 0.10 " 0.10" 0.10" 4.0 feet 4.0 \text{ feet} 4.0 feet
- 1 " = 50 ′ 1" = 50' 1" = 5 0 ′ 50 0.10 " 0.10" 0.10" 5.0 feet 5.0 \text{ feet} 5.0 feet
- 1 " = 100 ′ 1" = 100' 1" = 10 0 ′ 100 0.10 " 0.10" 0.10" 10.0 feet 10.0 \text{ feet} 10.0 feet
Example Calculation : If a plan is drawn at 1 " = 40 ′ 1" = 40' 1" = 4 0 ′ and subheadings must plot at 0.14 " 0.14" 0.14" tall, the model space height is 0.14 × 40 = 5.6 feet 0.14 \times 40 = 5.6 \text{ feet} 0.14 × 40 = 5.6 feet .
Annotation Scaling in Modern CAD
Modern CAD software (AutoCAD / Civil 3D) utilizes Annotation Scale . When annotative text, dimensions, or blocks are assigned an annotation scale, the software automatically adjusts the model space display size depending on the viewport scale active in layout paper space. This eliminates the need to duplicate text objects when creating detail viewports at different scales.
Text Styles and Font Standards
To maintain legibility across high-speed plotters, reproduction copiers, and digital PDF viewports:
Font Selection : Use clear, monospaced or clean sans-serif single-stroke technical fonts such as Simplex.shx , Leroy.shx , Arial.ttf , or ISOCPEUR . Decorative, cursive, or complex serif fonts (like Times New Roman) are strictly prohibited in technical linework annotation.
Capitalization : All technical callouts, plan notes, title block labels, and boundary descriptions should be written in ALL CAPS .
Width Factor & Obliquing : Keep font width factor between 0.90 and 1.0. Obliquing (slanting) angles should only be applied to specialized features like watercourse names or sewer flow directions.
- Dimensioning Styles, Plan Notes, and Callouts
- 1. Survey Boundary Dimensioning
Bearings : Expressed in Degrees, Minutes, and Seconds ( D ∘ M ′ S ′ ′ D^{\circ} M' S'' D ∘ M ′ S ′′ ), aligned parallel to the property line (e.g., N 45 ∘ 12 ′ 30 ′ ′ E \text{N } 45^{\circ} 12' 30'' \text{ E} N 4 5 ∘ 1 2 ′ 3 0 ′′ E ). Read directions clockwise around the boundary traverse.
Distances : Expressed in U.S. Survey Feet or International Feet to two decimal places (hundredths of a foot, e.g., 145.82 ′ 145.82' 145.8 2 ′ ), or three decimal places for high-precision control points.
2. Plan Notes
General Notes : Located in a block on Sheet 1. Covers global project attributes:
Horizontal Datum (e.g., NAD83 2011 Epoch 2010.00 State Plane Zone).
Vertical Datum (e.g., NAVD88 established by GNSS observation).
Basis of Bearings statement.
Source of boundary title research and deed reference numbers.
Date of field survey performance.
Underground utility warning note (e.g., "Call 811 Before Digging").
Specific Key Notes : Tagged callouts using numbered flags or hexagons matching numbered items in a key note table (e.g., [1] = "Found 1/2-inch iron pin 0.3' below grade").
3. Boundary Callouts
Monument Callouts : Fully describe physical monuments found or set (e.g., FOUND 5/8" REBAR W/ ALUM CAP 'PLS 9876' ).
Adjoiner Callouts : Identify neighboring property owners and legal recording references (e.g., N/F JANE DOE, DEED BOOK 412, PAGE 88 ).
Boundary Curve Tables
When a property boundary includes circular arc segments (such as road cul-de-sacs or curved rights-of-way), crowding long curve callouts along linework makes drawings unreadable. Instead, curve segments are tagged ( C1 , C2 , C3 ) and detailed in a Curve Table .
Key Horizontal Curve Parameters
Delta ( Δ \Delta Δ ) : Central angle subtended by the arc.
Radius ( R R R ) : Radius of the circular arc.
Arc Length ( L L L ) : Distance measured along the curved arc: L = R × Δ rad L = R \times \Delta_{\text{rad}} L = R × Δ rad .
Chord Length ( C C C ) : Straight-line distance between Point of Curvature (PC) and Point of Tangency (PT): C = 2 R sin ( Δ 2 ) C = 2 R \sin\left(\frac{\Delta}{2}\right) C = 2 R sin ( 2 Δ ) .
Chord Bearing ( C B CB CB ) : Compass bearing of the straight chord line.
Curve # Delta ( Δ \Delta Δ ) Radius ( R R R ) Arc Length ( L L L ) Chord Length ( C C C ) Chord Bearing ( C B CB CB )
C1 28 ∘ 45 ′ 20 ′ ′ 28^{\circ} 45' 20'' 2 8 ∘ 4 5 ′ 2 0 ′′ 250.00 ′ 250.00' 250.0 0 ′ 125.47 ′ 125.47' 125.4 7 ′ 124.16 ′ 124.16' 124.1 6 ′ N 62 ∘ 30 ′ 15 ′ ′ E \text{N } 62^{\circ} 30' 15'' \text{ E} N 6 2 ∘ 3 0 ′ 1 5 ′′ E
C2 45 ∘ 10 ′ 00 ′ ′ 45^{\circ} 10' 00'' 4 5 ∘ 1 0 ′ 0 0 ′′ 150.00 ′ 150.00' 150.0 0 ′ 118.25 ′ 118.25' 118.2 5 ′ 115.21 ′ 115.21' 115.2 1 ′ S 15 ∘ 20 ′ 40 ′ ′ W \text{S } 15^{\circ} 20' 40'' \text{ W} S 1 5 ∘ 2 0 ′ 4 0 ′′ W
Title Block Preparation & Vicinity Maps
The Title Block is the official administrative panel of a survey plat, situated along the right boundary or bottom margin of the sheet.
Required Title Block Elements:
Professional Firm Information : Company name, address, contact info, and business license number.
Client & Project Title : Project name, street address, municipality, county, and state.
Drawing Scale & Bar Scale : Written scale (e.g., 1 " = 30 ′ 1" = 30' 1" = 3 0 ′ ) and graphic bar scale.
Date & Author : Date of completion, drafted by initials, checked by initials.
Sheet Numbering : Sequential page identification (e.g., Sheet 2 of 5).
Revision Block : Table recording revision numbers, description of changes, dates, and author initials.
Surveyor Seal & Signature Block : Designated empty area reserved for the Professional Land Surveyor's (PLS) embossed or digital seal, signature, and license renewal date.
Vicinity Map (Location Map)
A small inset map placed in the upper corner of the plat (typically scaled at 1 " = 1 , 000 ′ 1" = 1,000' 1" = 1 , 00 0 ′ to 1 " = 2 , 000 ′ 1" = 2,000' 1" = 2 , 00 0 ′ or N.T.S. Not to Scale). Its sole purpose is to locate the subject property within the regional transportation network, showing major intersecting roads, water bodies, and municipal borders, complete with its own North arrow.