Study guide
8.3 Area Calculations (Triangles, Trapezoids, Rectangles, and Simple Polygons)
NSPS Certified Survey Technician Level I Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Survey Types & Historical Development
1.1 CST Certification & Survey Licensing Distinction 1.2 Boundary, Cadastral, and Land Surveys 1.3 Topographic, Hydrographic, and Route Surveys 1.4 Construction, As-Built, and Industrial Alignment Surveys 1.5 Historical Surveying Units, Instruments, and Practices
2 Chapter 2: Tripods, Instruments & Field Setup
2.1 Tripod Setup, Centering, Plumbing, and Optical Plummets 2.2 Instrument Leveling, Bubble Vials, and Electronic Tilt Sensors 2.3 Equipment Care, Cleaning, Storage, and Transport Safety
3 Chapter 3: Taping, Leveling & Distance Measurement
3.1 Steel Taping, Tension, Temperature, and Slope Corrections 3.2 Differential Leveling Equipment, Rods, Targets, and Rod Reading 3.3 Total Station Operations, Prism Constants, and EDM Basics 3.4 Data Collectors, Field Software Jobs, and File Management
4 Chapter 4: Field Operations, Notes & Communication
4.1 Field Note Bookkeeping, Standard Layout, and Hand-Drawn Sketches 4.2 Field Radio Procedures, Hand Signals, and Crew Communications 4.3 Line Clearing, Brush Removal, and Obstacle Clearance Safety 4.4 Setting Field Monuments, Rebar, Caps, Stakes, and Tacks
5 Chapter 5: Survey Control Networks & Monuments
5.1 Horizontal & Vertical Control Principles and Monument Types 5.2 Benchmarks, Datums (NAVD88, NAD83), and Field Verification Checks
6 Chapter 6: Basic Surveying Mathematics & Unit Conversions
6.1 Linear & Angular Unit Conversions (Feet, Chains, Links, Acres, DMS, Radians) 6.2 Right Triangle Trigonometry and Geometry in Surveying 6.3 Approved Calculator Operations & Memory Management (Casio fx-115/991, HP 35s, TI-36X)
7 Chapter 7: Leveling & Distance Computations
7.1 Differential Leveling Computations (HI, Backsight, Foresight, Page Checks) 7.2 Slope Distance Reductions and Horizontal/Vertical Components 7.3 Elevation, Grade Percent, and Stationing Calculations
8 Chapter 8: Coordinate Geometry & Area Calculations
8.1 Bearings, Azimuths, and Angular Conversions 8.2 Rectangular Coordinates (Northings/Eastings) and Departure/Latitude Basics 8.3 Area Calculations (Triangles, Trapezoids, Rectangles, and Simple Polygons)
9 Chapter 9: Plan Reading, Scale & Topography
9.1 Map Types, Plan Sheets, Title Blocks, and Revision Blocks 9.2 Scale Conversions, Graphical Scales, and Dimension Verification 9.3 Contour Lines, Spot Elevations, Interpolation, and Profiles
10 Chapter 10: CAD & Drafting Conventions
10.1 CAD Layers, Line Types, Symbols, and Legend Standards 10.2 Drafting Standards, Text Styles, and Title Block Preparation 10.3 Coordinate Systems, Grid vs. Ground, and Plan Orientation
11 Chapter 11: Field Safety, Hazards & First Aid
11.1 Personal Protective Equipment (PPE) & Construction Site Safety 11.2 Traffic Control, Flaggers, and Roadway Work Zone Safety (MUTCD) 11.3 Environmental Hazards: Heat Stress, Cold Exposure, Poisonous Plants, and Animals 11.4 Electrical Hazards, Overhead Power Lines, and Excavation Safety 11.5 Basic First Aid, CPR Principles, and Emergency Response Protocols
8.3 Area Calculations (Triangles, Trapezoids, Rectangles, and Simple Polygons)
Key Takeaways Explain This Topic AI
1 Acre = 43,560 square feet; to convert square feet to acres, divide square footage by 43,560.
Rectangle Area = Length × Width; Triangle Area = 0.5 × base × height or 0.5 × a × b × sin(C); Trapezoid Area = 0.5 × (b1 + b2) × height.
The Coordinate Area Method (Shoelace Formula) cross-multiplies sequential Northings and Eastings around a closed polygon to determine Double Area.
Always repeat the starting coordinate pair at the end of the coordinate table when computing polygon areas.
Double Meridian Distance (DMD) sums line departures to compute double areas from line latitudes.
Last updated: July 2026
8.3 Area Calculations (Triangles, Trapezoids, Rectangles, and Simple Polygons)
Area calculation is one of the primary duties of survey technicians, essential for property boundary descriptions, land valuation, deed verification, tax mapping, and earthwork volume estimating. Whether evaluating simple geometric lot shapes or computing the area of complex closed boundary polygons, surveyors must perform calculations accurately in both Square Feet ( sq ft \text{sq ft} sq ft or ft 2 \text{ft}^2 ft 2 ) and Acres ( ac \text{ac} ac ) . This section details the fundamental formulas for standard geometric shapes, introduces the coordinate area (shoelace) method and Double Meridian Distance (DMD) technique for closed traverses, and highlights unit conversion rules for the CST Level I examination.
1. Units of Area and Land Measurement Conversions
In U.S. Customary survey practice, land areas are measured in square feet or acres.
The Standard Acre Conversion Factor 1 Acre = 43 , 560 Square Feet 1\text{ Acre} = 43,560\text{ Square Feet} 1 Acre = 43 , 560 Square Feet
Historical Origin of the Acre:
The unit originates from historical Gunter's chain surveying, where 1 chain = 66 feet and 1 furlong = 660 feet. An acre was defined as 1 square furlong, or 10 square chains: 1 Acre = 10 chains 2 = 10 × ( 66 ft × 66 ft ) = 10 × 4 , 356 sq ft = 43 , 560 sq ft 1\text{ Acre} = 10\text{ chains}^2 = 10 \times (66\text{ ft} \times 66\text{ ft}) = 10 \times 4,356\text{ sq ft} = 43,560\text{ sq ft} 1 Acre = 10 chains 2 = 10 × ( 66 ft × 66 ft ) = 10 × 4 , 356 sq ft = 43 , 560 sq ft
Converting Square Feet to Acres: Area in Acres = Area in Square Feet 43 , 560 \text{Area in Acres} = \frac{\text{Area in Square Feet}}{43,560} Area in Acres = 43 , 560 Area in Square Feet
Example : A lot with an area of 125 , 480 sq ft 125,480\text{ sq ft} 125 , 480 sq ft converted to acres: Acres = 125 , 480 43 , 560 = 2.88062... ≈ 2.881 Acres \text{Acres} = \frac{125,480}{43,560} = 2.88062... \approx 2.881\text{ Acres} Acres = 43 , 560 125 , 480 = 2.88062... ≈ 2.881 Acres
- 2. Standard Geometric Formulas
- A. Rectangles and Squares
For a rectangular boundary with perpendicular sides of length ( L L L ) and width ( W W W ): Area = Length × Width = L × W \text{Area} = \text{Length} \times \text{Width} = L \times W Area = Length × Width = L × W +------------------------+
- | | Width (W)
- +------------------------+
- Length (L)
- B. Triangles
Surveyors encounter triangular parcels or subdivide complex polygons into simpler triangles using three key formulas based on available field data: /|
- / |
- a / | h (Height)
- / |
- /____|____
- b (Base)
Base-Height Formula (When perpendicular height h h h and base b b b are known): Area = 1 2 × b × h \text{Area} = \frac{1}{2} \times b \times h Area = 2 1 × b × h
Side-Angle-Side (SAS) Formula (When two sides a a a and b b b and their included angle C C C are known): Area = 1 2 × a × b × sin ( C ) \text{Area} = \frac{1}{2} \times a \times b \times \sin(C) Area = 2 1 × a × b × sin ( C )
Heron's Formula (When all three side lengths a a a , b b b , and c c c are known): s = a + b + c 2 ( Semi-perimeter ) s = \frac{a + b + c}{2} \quad (\text{Semi-perimeter}) s = 2 a + b + c ( Semi-perimeter ) Area = s ( s − a ) ( s − b ) ( s − c ) \text{Area} = \sqrt{s(s - a)(s - b)(s - c)} Area = s ( s − a ) ( s − b ) ( s − c )
Step-by-Step Triangle Example (SAS Formula):
Problem : Calculate the area of a triangular lot with side a = 185.00 ft a = 185.00\text{ ft} a = 185.00 ft , side b = 240.00 ft b = 240.00\text{ ft} b = 240.00 ft , and included angle C = 52 ° 15 ′ 00 " C = 52° 15' 00" C = 52°1 5 ′ 00" .
Step 1 : Convert angle to decimal degrees: 52 ° 15 ′ = 52.25 ° 52° 15' = 52.25° 52°1 5 ′ = 52.25° .
Step 2 : Calculate sin ( 52.25 ° ) = 0.7906896 \sin(52.25°) = 0.7906896 sin ( 52.25° ) = 0.7906896 .
Step 3 : Apply SAS formula: Area = 1 2 × 185.00 × 240.00 × 0.7906896 = 22 , 200 × 0.7906896 = 17 , 553.31 sq ft \text{Area} = \frac{1}{2} \times 185.00 \times 240.00 \times 0.7906896 = 22,200 \times 0.7906896 = 17,553.31\text{ sq ft} Area = 2 1 × 185.00 × 240.00 × 0.7906896 = 22 , 200 × 0.7906896 = 17 , 553.31 sq ft
Step 4 : Convert to acres: Acres = 17 , 553.31 43 , 560 = 0.403 Acres \text{Acres} = \frac{17,553.31}{43,560} = 0.403\text{ Acres} Acres = 43 , 560 17 , 553.31 = 0.403 Acres
C. Trapezoids
Trapezoids occur frequently in road cross-sections, right-of-way strips, and boundary lots bounded by two parallel lines ( b 1 b_1 b 1 and b 2 b_2 b 2 ) separated by perpendicular distance ( h h h ). Area = b 1 + b 2 2 × h = 1 2 ( b 1 + b 2 ) h \text{Area} = \frac{b_1 + b_2}{2} \times h = \frac{1}{2} (b_1 + b_2) h Area = 2 b 1 + b 2 × h = 2 1 ( b 1 + b 2 ) h b1 (Top Base)
- +----------+
- / | \
- / | h \
- +---|------------+
- b2 (Bottom Base)
Trapezoid Step-by-Step Example:
Problem : A drainage easement forms a trapezoid with parallel sides measuring 75.00 ft 75.00\text{ ft} 75.00 ft and 115.00 ft 115.00\text{ ft} 115.00 ft , and a perpendicular distance between them of 40.00 ft 40.00\text{ ft} 40.00 ft . Compute the area.
Step 1 : Average the two bases: 75.00 + 115.00 2 = 190.00 2 = 95.00 ft \frac{75.00 + 115.00}{2} = \frac{190.00}{2} = 95.00\text{ ft} 2 75.00 + 115.00 = 2 190.00 = 95.00 ft .
Step 2 : Multiply by height: Area = 95.00 × 40.00 = 3 , 800.00 sq ft \text{Area} = 95.00 \times 40.00 = 3,800.00\text{ sq ft} Area = 95.00 × 40.00 = 3 , 800.00 sq ft .
3. Coordinate Area Method (Shoelace Formula)
When a closed polygon's boundary points are defined by rectangular coordinates ( N i , E i ) (N_i, E_i) ( N i , E i ) , the exact enclosed area is computed using the Coordinate Method (also known as the Shoelace Formula or Gauss's Area Formula). Point 1 (N1, E1) ----> Point 2 (N2, E2)
- ^ |
- | v
- Point 4 (N4, E4) <---- Point 3 (N3, E3)
Tabular Execution Steps:
Arrange station coordinates in sequential order around the perimeter (either clockwise or counter-clockwise).
List the starting point coordinates again at the bottom of the table to close the loop.
Cross-multiply down-right (Northings × \times × next Eastings) and sum the products ( ∑ Product N E \sum \text{Product}_{NE} ∑ Product NE ).
Cross-multiply down-left (Eastings × \times × next Northings) and sum the products ( ∑ Product E N \sum \text{Product}_{EN} ∑ Product EN ).
Subtract the total left sum from the total right sum, take the absolute value, and divide by 2. Double Area = ∣ ∑ ( N i × E i + 1 ) − ∑ ( E i × N i + 1 ) ∣ \text{Double Area} = \left| \sum (N_i \times E_{i+1}) - \sum (E_i \times N_{i+1}) \right| Double Area = ∑ ( N i × E i + 1 ) − ∑ ( E i × N i + 1 ) Area = Double Area 2 \text{Area} = \frac{\text{Double Area}}{2} Area = 2 Double Area
Worked Coordinate Area Example:
Problem : Calculate the area of a 4-point closed survey boundary with coordinates:
Station A: N = 100.00 ft , E = 100.00 ft N = 100.00\text{ ft}, E = 100.00\text{ ft} N = 100.00 ft , E = 100.00 ft
Station B: N = 100.00 ft , E = 400.00 ft N = 100.00\text{ ft}, E = 400.00\text{ ft} N = 100.00 ft , E = 400.00 ft
Station C: N = 300.00 ft , E = 500.00 ft N = 300.00\text{ ft}, E = 500.00\text{ ft} N = 300.00 ft , E = 500.00 ft
Station D: N = 400.00 ft , E = 100.00 ft N = 400.00\text{ ft}, E = 100.00\text{ ft} N = 400.00 ft , E = 100.00 ft
Station Northing ( N N N ) Easting ( E E E ) Down-Right Product ( N i × E i + 1 N_i \times E_{i+1} N i × E i + 1 ) Down-Left Product ( E i × N i + 1 E_i \times N_{i+1} E i × N i + 1 )
A 100.00 100.00 100.00 × 400.00 = 40 , 000 100.00 \times 400.00 = 40,000 100.00 × 400.00 = 40 , 000 100.00 × 100.00 = 10 , 000 100.00 \times 100.00 = 10,000 100.00 × 100.00 = 10 , 000
B 100.00 400.00 100.00 × 500.00 = 50 , 000 100.00 \times 500.00 = 50,000 100.00 × 500.00 = 50 , 000 400.00 × 300.00 = 120 , 000 400.00 \times 300.00 = 120,000 400.00 × 300.00 = 120 , 000
C 300.00 500.00 300.00 × 100.00 = 30 , 000 300.00 \times 100.00 = 30,000 300.00 × 100.00 = 30 , 000 500.00 × 400.00 = 200 , 000 500.00 \times 400.00 = 200,000 500.00 × 400.00 = 200 , 000
D 400.00 100.00 400.00 × 100.00 = 40 , 000 400.00 \times 100.00 = 40,000 400.00 × 100.00 = 40 , 000 100.00 × 100.00 = 10 , 000 100.00 \times 100.00 = 10,000 100.00 × 100.00 = 10 , 000
A (Close) 100.00 100.00 Sum Down-Right = 160 , 000 160,000 160 , 000 Sum Down-Left = 340 , 000 340,000 340 , 000
Step 1 : Calculate difference: ∣ 160 , 000 − 340 , 000 ∣ = ∣ − 180 , 000 ∣ = 180 , 000 sq ft |160,000 - 340,000| = |-180,000| = 180,000\text{ sq ft} ∣160 , 000 − 340 , 000∣ = ∣ − 180 , 000∣ = 180 , 000 sq ft (Double Area).
Step 2 : Divide by 2: Area = 180 , 000 2 = 90 , 000 sq ft \text{Area} = \frac{180,000}{2} = 90,000\text{ sq ft} Area = 2 180 , 000 = 90 , 000 sq ft .
Step 3 : Convert to acres: Acres = 90 , 000 43 , 560 = 2.066 Acres \text{Acres} = \frac{90,000}{43,560} = 2.066\text{ Acres} Acres = 43 , 560 90 , 000 = 2.066 Acres .
4. Double Meridian Distance (DMD) Method Intro
Before computers, surveyors routinely computed polygon areas using the Double Meridian Distance (DMD) method derived from line Latitudes and Departures.
Rules of DMD Computation:
Rule 1 : The DMD of the first course equals the Departure of the first course.
Rule 2 : The DMD of any subsequent course equals the DMD of the preceding course + Departure of the preceding course + Departure of the course itself.
Rule 3 : The DMD of the last course must equal the Departure of the last course with opposite sign.
Double Area : For each line, multiply its DMD by its Latitude .
Total Area : Sum the double areas, take the absolute value, and divide by 2.
5. CST Exam Traps & Common Errors
Warning
CST Level I Exam Traps :
Incorrect Acre Conversion Constant : Dividing square footage by 43,500 or 40,000 instead of 43,560 is a classic blunder. Memorize 43 , 560 sq ft/acre 43,560\text{ sq ft/acre} 43 , 560 sq ft/acre !
Forgetting to Repeat the Initial Point : In the coordinate area method, failing to repeat Point 1 at the bottom of the table leaves the final side open, producing a completely false area.
Forgetting to Divide by 2 : Calculating the difference of cross-products gives Double Area . Forgetting to divide by 2 yields an area exactly twice as large as the true lot size.
Misinterpreting Oblique Triangles : Applying 1 2 × b × h \frac{1}{2} \times b \times h 2 1 × b × h to an oblique triangle using a side length in place of the perpendicular height h h h yields an incorrect result. Always use the SAS formula ( 1 2 a b sin C \frac{1}{2} a b \sin C 2 1 ab sin C ) or Heron's formula when perpendicular height is not directly provided.