Study guide
7.1 Differential Leveling Computations (HI, Backsight, Foresight, Page Checks)
NSPS Certified Survey Technician Level I Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Survey Types & Historical Development
1.1 CST Certification & Survey Licensing Distinction 1.2 Boundary, Cadastral, and Land Surveys 1.3 Topographic, Hydrographic, and Route Surveys 1.4 Construction, As-Built, and Industrial Alignment Surveys 1.5 Historical Surveying Units, Instruments, and Practices
2 Chapter 2: Tripods, Instruments & Field Setup
2.1 Tripod Setup, Centering, Plumbing, and Optical Plummets 2.2 Instrument Leveling, Bubble Vials, and Electronic Tilt Sensors 2.3 Equipment Care, Cleaning, Storage, and Transport Safety
3 Chapter 3: Taping, Leveling & Distance Measurement
3.1 Steel Taping, Tension, Temperature, and Slope Corrections 3.2 Differential Leveling Equipment, Rods, Targets, and Rod Reading 3.3 Total Station Operations, Prism Constants, and EDM Basics 3.4 Data Collectors, Field Software Jobs, and File Management
4 Chapter 4: Field Operations, Notes & Communication
4.1 Field Note Bookkeeping, Standard Layout, and Hand-Drawn Sketches 4.2 Field Radio Procedures, Hand Signals, and Crew Communications 4.3 Line Clearing, Brush Removal, and Obstacle Clearance Safety 4.4 Setting Field Monuments, Rebar, Caps, Stakes, and Tacks
5 Chapter 5: Survey Control Networks & Monuments
5.1 Horizontal & Vertical Control Principles and Monument Types 5.2 Benchmarks, Datums (NAVD88, NAD83), and Field Verification Checks
6 Chapter 6: Basic Surveying Mathematics & Unit Conversions
6.1 Linear & Angular Unit Conversions (Feet, Chains, Links, Acres, DMS, Radians) 6.2 Right Triangle Trigonometry and Geometry in Surveying 6.3 Approved Calculator Operations & Memory Management (Casio fx-115/991, HP 35s, TI-36X)
7 Chapter 7: Leveling & Distance Computations
7.1 Differential Leveling Computations (HI, Backsight, Foresight, Page Checks) 7.2 Slope Distance Reductions and Horizontal/Vertical Components 7.3 Elevation, Grade Percent, and Stationing Calculations
8 Chapter 8: Coordinate Geometry & Area Calculations
8.1 Bearings, Azimuths, and Angular Conversions 8.2 Rectangular Coordinates (Northings/Eastings) and Departure/Latitude Basics 8.3 Area Calculations (Triangles, Trapezoids, Rectangles, and Simple Polygons)
9 Chapter 9: Plan Reading, Scale & Topography
9.1 Map Types, Plan Sheets, Title Blocks, and Revision Blocks 9.2 Scale Conversions, Graphical Scales, and Dimension Verification 9.3 Contour Lines, Spot Elevations, Interpolation, and Profiles
10 Chapter 10: CAD & Drafting Conventions
10.1 CAD Layers, Line Types, Symbols, and Legend Standards 10.2 Drafting Standards, Text Styles, and Title Block Preparation 10.3 Coordinate Systems, Grid vs. Ground, and Plan Orientation
11 Chapter 11: Field Safety, Hazards & First Aid
11.1 Personal Protective Equipment (PPE) & Construction Site Safety 11.2 Traffic Control, Flaggers, and Roadway Work Zone Safety (MUTCD) 11.3 Environmental Hazards: Heat Stress, Cold Exposure, Poisonous Plants, and Animals 11.4 Electrical Hazards, Overhead Power Lines, and Excavation Safety 11.5 Basic First Aid, CPR Principles, and Emergency Response Protocols
7.1 Differential Leveling Computations (HI, Backsight, Foresight, Page Checks)
Key Takeaways Explain This Topic AI
Height of Instrument (HI) = Point Elevation + Backsight (BS). HI represents the elevation of the optical line of sight above datum.
New Point Elevation = HI - Foresight (FS). Intermediate Foresights (IFS) are also subtracted from HI.
Arithmetic Page Check: Starting Elevation + Sum(BS) - Sum(FS) = Closing Elevation. This checks math only, not field measurement errors.
Loop Misclosure = Observed Closing Elevation - Published/Known Benchmark Elevation.
Allowable Closure Error E = C * sqrt(K), where C is the order coefficient (e.g., 0.05 ft for Third Order) and K is loop length in miles.
Last updated: July 2026
7.1 Differential Leveling Computations
Differential leveling is one of the most fundamental operations in land surveying. It establishes the elevation of unknown ground points relative to an established vertical datum or benchmark. By setting up a leveling instrument and reading a graduated rod held on points of known and unknown elevation, survey technicians determine elevation differences step-by-step across a level run or closed circuit.
Key Concepts & Fundamental Definitions
To compute differential leveling notes accurately, technicians must master specific field terminology and understand how each measurement relates to instrument geometry:
Benchmark (BM) : A fixed, permanent or semi-permanent reference object of known elevation above a vertical datum (e.g., NAVD88). Benchmarks serve as the starting and ending control points for level circuits.
Backsight (BS) : A rod reading taken on a point of known elevation. Also referred to as a plus sight (+BS) , it is added to the point elevation to determine the elevation of the line of sight.
Height of Instrument (HI) : The elevation of the line of sight (telescope crosshairs) of the level instrument above the vertical datum. Note that HI is an elevation , not the physical height of the instrument above the ground surface.
Foresight (FS) : A rod reading taken on a turning point or benchmark of unknown elevation. Also referred to as a minus sight (-FS) , it is subtracted from the HI to calculate the new point elevation.
Intermediate Foresight (IFS) : A rod reading taken on a ground profile point or feature where elevation is needed, but which is not used as a pivot point for advancing the level line.
Turning Point (TP) : A stable, solid temporary pivot point (such as a steel turning pin, stake, or concrete corner) used to advance the level line from one instrument setup to the next.
Core Leveling Formulas
Every differential leveling field note reduction relies on two primary equations: Height of Instrument (HI) = Elevation BM/TP + BS \text{Height of Instrument (HI)} = \text{Elevation}_{\text{BM/TP}} + \text{BS} Height of Instrument (HI) = Elevation BM/TP + BS Elevation New Point = HI − FS \text{Elevation}_{\text{New Point}} = \text{HI} - \text{FS} Elevation New Point = HI − FS
If an intermediate foresight is taken, its elevation is calculated identically: Elevation IFS = HI − IFS \text{Elevation}_{\text{IFS}} = \text{HI} - \text{IFS} Elevation IFS = HI − IFS
Standard Differential Leveling Field Note Format
Field notes must follow standardized columnar layouts to ensure clarity, prevent calculation errors, and facilitate audit verification. The standard format contains columns for Station, BS (+), HI, FS (-), IFS (-), Elevation, and Remarks.
- Station BS (+) HI (ft) FS (-) IFS (-) Elev (ft) Remarks
- BM 100 4.82 104.82 - - 100.00 Brass cap BM 100
- TP 1 6.15 107.45 3.52 - 101.30 Steel pin set in soil
- TP 2 5.30 108.91 3.84 - 103.61 PK nail in tree root
- BM 101 - - 4.12 - 104.79 Concrete monument
- SUMS 16.27 11.48
- Step-by-Step Worked Leveling Computation
Let's trace the step-by-step reduction of the field notes presented in the table above:
Setup 1 at BM 100 (Known Elev = 100.00 ft) :
Backsight reading on BM 100: BS = + 4.82 ft \text{BS} = +4.82\text{ ft} BS = + 4.82 ft .
Calculate HI 1 = 100.00 + 4.82 = 104.82 ft \text{HI}_1 = 100.00 + 4.82 = 104.82\text{ ft} HI 1 = 100.00 + 4.82 = 104.82 ft .
Foresight reading on TP 1: FS = 3.52 ft \text{FS} = 3.52\text{ ft} FS = 3.52 ft .
Calculate Elevation of TP 1 = 104.82 − 3.52 = 101.30 ft \text{Elevation of TP 1} = 104.82 - 3.52 = 101.30\text{ ft} Elevation of TP 1 = 104.82 − 3.52 = 101.30 ft .
Setup 2 at TP 1 (Elev = 101.30 ft) :
Instrument is moved forward and releveled.
Backsight reading on TP 1: BS = + 6.15 ft \text{BS} = +6.15\text{ ft} BS = + 6.15 ft .
Calculate HI 2 = 101.30 + 6.15 = 107.45 ft \text{HI}_2 = 101.30 + 6.15 = 107.45\text{ ft} HI 2 = 101.30 + 6.15 = 107.45 ft .
Foresight reading on TP 2: FS = 3.84 ft \text{FS} = 3.84\text{ ft} FS = 3.84 ft .
Calculate Elevation of TP 2 = 107.45 − 3.84 = 103.61 ft \text{Elevation of TP 2} = 107.45 - 3.84 = 103.61\text{ ft} Elevation of TP 2 = 107.45 − 3.84 = 103.61 ft .
Setup 3 at TP 2 (Elev = 103.61 ft) :
Instrument is moved forward and releveled.
Backsight reading on TP 2: BS = + 5.30 ft \text{BS} = +5.30\text{ ft} BS = + 5.30 ft .
Calculate HI 3 = 103.61 + 5.30 = 108.91 ft \text{HI}_3 = 103.61 + 5.30 = 108.91\text{ ft} HI 3 = 103.61 + 5.30 = 108.91 ft .
Foresight reading on closing BM 101: FS = 4.12 ft \text{FS} = 4.12\text{ ft} FS = 4.12 ft .
Calculate Final Elevation of BM 101 = 108.91 − 4.12 = 104.79 ft \text{Final Elevation of BM 101} = 108.91 - 4.12 = 104.79\text{ ft} Final Elevation of BM 101 = 108.91 − 4.12 = 104.79 ft .
The Arithmetic Page Check
Before accepting reduced elevations, technicians must perform an arithmetic page check to ensure no mathematical errors were made in addition or subtraction. Starting Elevation + ∑ BS − ∑ FS = Ending Elevation \text{Starting Elevation} + \sum \text{BS} - \sum \text{FS} = \text{Ending Elevation} Starting Elevation + ∑ BS − ∑ FS = Ending Elevation ∑ BS − ∑ FS = Ending Elevation − Starting Elevation \sum \text{BS} - \sum \text{FS} = \text{Ending Elevation} - \text{Starting Elevation} ∑ BS − ∑ FS = Ending Elevation − Starting Elevation
Using the values from our sample field notes:
∑ BS = 4.82 + 6.15 + 5.30 = 16.27 ft \sum \text{BS} = 4.82 + 6.15 + 5.30 = 16.27\text{ ft} ∑ BS = 4.82 + 6.15 + 5.30 = 16.27 ft
∑ FS = 3.52 + 3.84 + 4.12 = 11.48 ft \sum \text{FS} = 3.52 + 3.84 + 4.12 = 11.48\text{ ft} ∑ FS = 3.52 + 3.84 + 4.12 = 11.48 ft
- Difference: 16.27 − 11.48 = + 4.79 ft 16.27 - 11.48 = +4.79\text{ ft} 16.27 − 11.48 = + 4.79 ft
- Elevation Change: 104.79 − 100.00 = + 4.79 ft 104.79 - 100.00 = +4.79\text{ ft} 104.79 − 100.00 = + 4.79 ft
Since + 4.79 ft = + 4.79 ft +4.79\text{ ft} = +4.79\text{ ft} + 4.79 ft = + 4.79 ft , the page check mathematically closes perfectly.
Evaluating Loop Closure & Allowable Error
When a level line closes back on the starting benchmark or another published benchmark, field measurement errors cause a discrepancy known as misclosure : Loop Misclosure = Final Observed Elevation − Published/Known Elevation \text{Loop Misclosure} = \text{Final Observed Elevation} - \text{Published/Known Elevation} Loop Misclosure = Final Observed Elevation − Published/Known Elevation
To determine if a level run meets precision standards, the misclosure is compared to an allowable error of closure ( E E E ) : E = C ⋅ K E = C \cdot \sqrt{K} E = C ⋅ K
Where:
E E E = Allowable error of closure (in feet or millimeters).
C C C = Constant representing the order of accuracy (e.g., 0.05 ft 0.05\text{ ft} 0.05 ft for Third Order survey standards).
K K K = Total length of the level circuit in miles (or kilometers).
Worked Closure Example
A level circuit begins on BM A (Elev = 312.450 ft) and closes back on BM A with an observed closing elevation of 312.510 ft. The total length of the level loop is 1.44 miles. Evaluate the closure against Third Order specifications ( E = 0.05 M E = 0.05 \sqrt{M} E = 0.05 M ft).
Calculate Misclosure : Misclosure = 312.510 − 312.450 = + 0.060 ft \text{Misclosure} = 312.510 - 312.450 = +0.060\text{ ft} Misclosure = 312.510 − 312.450 = + 0.060 ft
Calculate Allowable Closure : E = 0.05 ⋅ 1.44 = 0.05 ⋅ 1.2 = 0.060 ft E = 0.05 \cdot \sqrt{1.44} = 0.05 \cdot 1.2 = 0.060\text{ ft} E = 0.05 ⋅ 1.44 = 0.05 ⋅ 1.2 = 0.060 ft
Conclusion : The observed misclosure ( + 0.060 ft +0.060\text{ ft} + 0.060 ft ) is exactly within the allowable limit ( 0.060 ft 0.060\text{ ft} 0.060 ft ). The level loop is acceptable.
- Exam Traps & Common Field Pitfalls
- Exam Trap 1: HI Elevation vs. Physical Instrument Height ( h i h_i h i )
Do not confuse HI (Height of Instrument elevation above datum, calculated as Elev + BS \text{Elev} + \text{BS} Elev + BS ) with h i h_i h i (the physical tape measurement from the ground stake to the optical center of a total station). In differential leveling, HI is always an elevation relative to sea level or project datum.
Exam Trap 2: Limitations of the Page Check
The arithmetic page check proves ONLY that your addition and subtraction in the note columns are correct. It CANNOT catch field rod reading blunders, misread graduations, unlevel bubbles, or transcription errors.
Exam Trap 3: Subtraction vs. Addition Errors
Always remember: Backsights (+BS) are ADDED to point elevations to get HI; Foresights (-FS) are SUBTRACTED from HI to get point elevations. Reversing these signs is the most frequent computational error on the CST exam.