Study guide
3.3 Gears, Wheels, & Belts
NTN FireTEAM Firefighter
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Exam Foundation & Human Relations Part 1 (Judgment)
1.1 FireTEAM Battery Overview & Mechanics 1.2 Chain of Command & Professional Conduct 1.3 Peer Relations & Teamwork
2 Chapter 2: Human Relations Part 2 (Public Relations & Crisis)
2.1 Community Interaction & Customer Service 2.2 Scene Control & Stress Management 2.3 Video Scenario Strategy & Observation
3 Chapter 3: Mechanical Aptitude Part 1 (Simple Machines & Tools)
3.1 Levers & Mechanical Advantage 3.2 Pulleys & Block-and-Tackle Systems 3.3 Gears, Wheels, & Belts
4 Chapter 4: Mechanical Aptitude Part 2 (Hose, Ladder, & Pump Mechanics)
Section 4.1: Ladder Placement & Mechanics Section 4.2: Pump Theory & Pressure Relief Section 4.3: Hand Tools & Fireground Physics
5 Chapter 5: Mathematical Reasoning (Mental Math)
5.1 Mental Arithmetic & Conversions 5.2 Applied Hydraulics Math 5.3 Applied Fireground Geometry & Dosing
6 Chapter 6: Reading Comprehension & Policy Interpretation
6.1 Fact Extraction & Procedural Reading 6.2 NFPA & Workplace Safety Policy Analysis 6.3 Reading Comprehension Test Tactics
3.3 Gears, Wheels, & Belts
Key Takeaways Explain This Topic AI
The gear ratio is calculated by dividing the number of teeth on the driven gear by the number of teeth on the driver gear ( N driven / N driver N_{\text{driven}} / N_{\text{driver}} N driven / N driver ).
Gears trade rotational speed for torque: a smaller driver turning a larger driven gear increases torque but reduces speed, while a larger driver turning a smaller driven gear increases speed but reduces torque.
Directly meshing gears rotate in opposite directions, whereas adding an idler gear allows the driver and driven gears to rotate in the same direction without changing the gear ratio.
Bevel gears transmit rotational force between intersecting shafts at a 90-degree angle, commonly used in fire engine manual gate valves.
Wheel-and-axle systems (like hose reels and valve handwheels) multiply torque when force is applied to the larger wheel, making it easier to turn the smaller axle.
Last updated: July 2026
Gears, Wheels, and Belts in Fire Service Machinery
Gears, wheels, and belts are mechanical components designed to transmit rotational motion, adjust speed, and multiply torque. On the NTN FireTEAM exam, you will encounter diagrams of gear trains, wheel-and-axle setups, and belt-driven pulleys. To answer these questions successfully, you must understand gear ratio math, rotational direction rules, the trade-off between speed and torque, and how force is transmitted through shafts and belts.
Gear Mechanics and Gear Ratios
A gear is a wheel with teeth along its perimeter that mesh with another toothed wheel. When gears mesh, they transmit rotational force from a driver gear (the gear supplying the input force, such as a motor shaft) to a driven gear (the output gear connected to the load).
The relationship between two meshing gears is defined by the Gear Ratio : Gear Ratio = Number of Teeth on Driven Gear Number of Teeth on Driver Gear = N driven N driver \text{Gear Ratio} = \frac{\text{Number of Teeth on Driven Gear}}{\text{Number of Teeth on Driver Gear}} = \frac{N_{\text{driven}}}{N_{\text{driver}}} Gear Ratio = Number of Teeth on Driver Gear Number of Teeth on Driven Gear = N driver N driven
Alternatively, the gear ratio can be calculated using the diameters of the gears: Gear Ratio = Diameter of Driven Gear Diameter of Driver Gear \text{Gear Ratio} = \frac{\text{Diameter of Driven Gear}}{\text{Diameter of Driver Gear}} Gear Ratio = Diameter of Driver Gear Diameter of Driven Gear
Speed vs. Torque Trade-off
Gears allow you to trade rotational speed for rotational force (torque). The total work output must equal the work input (excluding friction). Therefore:
Increasing Torque (Speed Reduction): If a small driver gear turns a large driven gear, the gear ratio is greater than 1. The driven gear rotates slower than the driver gear, but it outputs more torque .
Increasing Speed (Torque Reduction): If a large driver gear turns a small driven gear, the gear ratio is less than 1. The driven gear rotates faster than the driver gear, but it outputs less torque .
Example Calculations
Case A: Large Driven Gear. A driver gear with 10 teeth meshes with a driven gear with 40 teeth.
Gear Ratio = 40 10 = 4 \text{Gear Ratio} = \frac{40}{10} = 4 Gear Ratio = 10 40 = 4 .
This is a 4:1 gear ratio. For every 4 rotations of the driver gear, the driven gear completes 1 rotation. The output speed is reduced to 1 4 \frac{1}{4} 4 1 of the input speed, but the output torque is multiplied by 4.
Case B: Small Driven Gear. A driver gear with 30 teeth meshes with a driven gear with 10 teeth.
Gear Ratio = 10 30 = 1 3 \text{Gear Ratio} = \frac{10}{30} = \frac{1}{3} Gear Ratio = 30 10 = 3 1 .
This is a 1:3 gear ratio. For every 1 rotation of the driver gear, the driven gear completes 3 rotations. The output speed is tripled, but the output torque is reduced to 1 3 \frac{1}{3} 3 1 of the input torque.
Rotational Direction in Gear Trains
Understanding how gears affect the direction of rotation is a common question type on the FireTEAM test.
Two Meshing Gears: When two gears mesh directly, they rotate in opposite directions . If the driver gear turns clockwise (CW), the driven gear must turn counter-clockwise (CCW).
Gear Trains (Three or More Gears): In a line of three gears (Gear A meshes with B, B meshes with C):
If Gear A turns CW, Gear B turns CCW.
Since Gear B turns CCW, Gear C must turn CW.
This leads to the general rule: In a series of meshing spur gears, every odd-numbered gear in the train rotates in the same direction as the first gear, while every even-numbered gear rotates in the opposite direction.
Idler Gears: Gear B in the example above is called an idler gear . It does not change the gear ratio between Gear A and Gear C, but it serves to make the driven gear (C) rotate in the same direction as the driver gear (A).
Spur Gears vs. Bevel Gears
Spur Gears: Have teeth cut parallel to the axis of rotation and transmit power between parallel shafts. They are the most common type of gear.
Bevel Gears: Have teeth cut on a cone-shaped surface. They are used to transmit rotational force between shafts that intersect, typically at a 90-degree angle .
Fire Service Application: Manual gate valves on fire engines use bevel gears. When a firefighter turns a vertical handwheel, a bevel gear meshes with another bevel gear at a 90-degree angle to turn a horizontal stem inside the valve casing, opening or closing the valve.
Wheel-and-Axle Mechanics
A wheel-and-axle consists of a large wheel attached to a smaller shaft (the axle) that rotate together.
Mechanical Advantage: The mechanical advantage of a wheel-and-axle is the ratio of their radii: MA = Radius of the Wheel Radius of the Axle = R wheel r axle \text{MA} = \frac{\text{Radius of the Wheel}}{\text{Radius of the Axle}} = \frac{R_{\text{wheel}}}{r_{\text{axle}}} MA = Radius of the Axle Radius of the Wheel = r axle R wheel
Force Multiplication: If you apply force to the outer edge of the wheel (large radius), you multiply the torque on the axle (small radius). A larger wheel requires less force to turn the axle.
Fireground Application:
Hose Reels: Booster hoses are stored on large reels. The reel has a large diameter handwheel or handle. To roll up the heavy wet hose, the firefighter turns the outer rim of the wheel, providing a mechanical advantage to wind the hose onto the axle.
Fire Hydrant and Valve Wheels: Gate valves on fire trucks and water supply networks are operated by large handwheels. Under high water pressure, the gate inside the valve experiences massive resistance. A large handwheel provides the mechanical advantage needed for a firefighter to overcome this resistance and turn the small stem to operate the valve.
Belt-Driven Pulleys
Belt drives consist of two or more pulleys connected by a continuous flexible belt. They are used to transmit rotational force over longer distances than gears.
Grip and Friction: Belt drives rely on friction rather than teeth to transmit power. They can slip if overloaded, which acts as a safety release but reduces efficiency.
Speed and Torque: The speed and torque relationships are identical to gears, using the pulley diameters: Pulley Ratio = Diameter of Driven Pulley Diameter of Driver Pulley \text{Pulley Ratio} = \frac{\text{Diameter of Driven Pulley}}{\text{Diameter of Driver Pulley}} Pulley Ratio = Diameter of Driver Pulley Diameter of Driven Pulley
Rotational Direction:
Open Belt: If the belt is open (runs straight between pulleys), both pulleys rotate in the same direction (both CW or both CCW).
Crossed Belt: If the belt is crossed (forms a figure-8), the pulleys rotate in opposite directions (one CW, the other CCW).
Fire Service Application: Small gasoline engines on portable pumps and ventilation saws sometimes use belt drives to spin the pump impeller or circular saw blade.
Machine Component Primary Function Direction of Motion Mechanical Advantage Ratio Fire Service Application
Spur Gears Transmit rotational power on parallel shafts Opposite directions (CW to CCW) Driven Teeth / Driver Teeth \text{Driven Teeth} / \text{Driver Teeth} Driven Teeth / Driver Teeth Small engine starter mechanisms, pump gears
Bevel Gears Transmit rotational power at 90-degree angle Perpendicular direction Driven Teeth / Driver Teeth \text{Driven Teeth} / \text{Driver Teeth} Driven Teeth / Driver Teeth Manual fire pump gate valves, water discharge valves
Wheel and Axle Multiply rotational torque or speed Same direction Wheel Radius / Axle Radius \text{Wheel Radius} / \text{Axle Radius} Wheel Radius / Axle Radius Hose reels, valve handwheels, hydrants
Open Belt Drive Transmit rotational power over distance Same direction (CW to CW) Driven Diameter / Driver Diameter \text{Driven Diameter} / \text{Driver Diameter} Driven Diameter / Driver Diameter Centrifugal pump fan belts, generator belts
Crossed Belt Drive Transmit rotational power and reverse motion Opposite directions (CW to CCW) Driven Diameter / Driver Diameter \text{Driven Diameter} / \text{Driver Diameter} Driven Diameter / Driver Diameter Mechanical tool drives, vintage air compressors