Study guide
10.2 Chemical Restructuring Products and Processing Dynamics
New York Cosmetology Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: New York Licensing Law & Professional Requirements
1.1 GBL Article 27, Scope of Practice & Who Must Be Licensed 1.2 Qualifying for Licensure: Age, 1,000 Hours, Health Certificate & the Temporary Licence 1.3 The Written and Practical Examinations: Format, Fees, Admittance & Results 1.4 Licence Term, Renewal, Lapse, Fees & Out-of-State Applicants 1.5 State and Federal Payroll and New York Sales Tax Requirements 1.6 Professional Ethics, Conduct & the Domestic Violence and Sexual Assault Awareness Requirement 1.7 Career Opportunities, Placement, Professional Organizations & Trade Shows
2 Chapter 2: Safety and Health — New York Salon Regulation
2.1 Salon Facilities, Plumbing and Nail-Salon Ventilation Standards 2.2 Business Licensing, Bonds, Mandatory Postings, Inspections and Penalties 2.3 OSHA Hazard Communication, Safety Data Sheets, Chemical Storage & Labelling 2.4 Hygienic Practices, Sanitary Dress, Towels and Linens
3 Chapter 3: Infection Control
3.1 Types, Classification, Growth and Reproduction of Infectious Organisms 3.2 Viruses, Fungi, Parasites and Modes of Transmission 3.3 Immunity and Body Defenses 3.4 Decontamination Levels, Physical and Chemical Agents 3.5 New York Implement Reprocessing and Prohibited Items (§§ 160.17, 160.18) 3.6 Blood, Body Fluids and Client Contact Procedures (§ 160.19)
4 Chapter 4: Anatomy, Physiology & Nutrition
4.1 Cells, Tissues, Organs and the Body Systems 4.2 Bones of the Head, Face, Neck, Arms, Hands, Legs and Feet 4.3 Muscles of the Head, Face, Neck, Arms and Legs 4.4 The Circulatory System and Blood Supply of the Head, Face and Neck 4.5 The Nervous System and the Cranial Nerves 4.6 Basic Principles of Nutrition
5 Chapter 5: Chemistry as Applied to Cosmetology
5.1 Matter, Elements, Compounds, Mixtures and Chemical Reactions 5.2 Solutions, Suspensions, Emulsions and Oxidation-Reduction Reactions 5.3 The pH Scale and FDA Law Governing Hair Care Products
6 Chapter 6: Hair Analysis, Scalp and Hair Disorders
6.1 Hair Structure: Root, Shaft and the Three Layers 6.2 Chemical Composition, Side Bonds and Hair Pigment 6.3 Growth Cycles, Growth Patterns and Wave Patterns 6.4 Hair Analysis: Texture and Density 6.5 Porosity, Elasticity and Other Diagnostic Factors 6.6 Dandruff, Alopecia and Hair Shaft Disorders 6.7 Fungal Infections, Infestations and Bacterial Infections
7 Chapter 7: Shampoos, Rinses, Conditioners & Treatments
7.1 Client Preparation, Draping, Analysis and Consultation 7.2 Hair Analysis Instruments and Equipment 7.3 Shampoo, Rinse and Conditioner Products, Composition and Procedures 7.4 The Scalp, Manipulations and Treatments for Hair and Scalp Disorders
8 Chapter 8: Hair Cutting and Shaping
8.1 Fundamentals of Design: Reference Points, Lines and Sections 8.2 Elevation, Guidelines and Overdirection 8.3 Scissor Haircutting: Nomenclature, Care of Shears and Grip 8.4 Razor Haircutting, Clippers, Combs and Ergonomics 8.5 Scissor Techniques: Blunt, Graduated, Uniform and Long-Layered Cuts 8.6 Texturising, Clipper Cutting and Cross-Checking 8.7 Contemporary and Specialised Haircutting: Female, Male and Children's Styles 8.8 Shaving, Mustache and Beard Shaping
9 Chapter 9: Hair Styling
9.1 Wet Styling Science, Finger Waving and Skip Waving 9.2 Pin Curling 9.3 Roller Styling and Patterns in Hairstyling 9.4 Finishing Techniques 9.5 Tools, Implements and Blow-Dry Styling 9.6 Thermal Curling and Flat Ironing 9.7 Hair Pressing 9.8 Twisting, Wrapping, Weaving, Extending, Locking and Braiding 9.9 Hair Pieces, Wigs and Extensions
10 Chapter 10: Chemical Restructuring
10.1 The Chemistry of Chemical Restructuring 10.2 Chemical Restructuring Products and Processing Dynamics 10.3 Client Consultation and Preliminary Procedures for Chemical Services 10.4 Permanent Waving: Rods, Wrapping Techniques and Procedures 10.5 Chemical Relaxers: Products and Application 10.6 Curl Re-formation and Corrective Chemical Restructuring
11 Chapter 11: Hair Coloring and Lightening
11.1 Colour Theory and the Law of Colour 11.2 Tone, Intensity, the Level System and Underlying Pigment 11.3 Classifications of Haircolour: Temporary Through Permanent 11.4 Developer Chemistry, Vegetable Dyes and Metallic Salts 11.5 Client Consultation and Preliminary Procedures for Colour 11.6 Hair Lightening, Decolorisation and Toning 11.7 Special Effects: Foiling, Balayage and Dimensional Placement 11.8 Corrective Colour Procedures
12 Chapter 12: Nail Care and Procedures
12.1 Nail Structure, Growth, and Nail Shape and Colour Analysis 12.2 Nail Disorders and Diseases 12.3 Manicuring, Pedicuring and Manipulations of the Hand, Arm, Leg and Foot 12.4 Foot Spa Sanitation and New York's Prohibited Implements 12.5 Nail Tips, Wraps, Liquid and Powder Extensions and Gels
13 Chapter 13: Skin Care and Procedures
13.1 Structure and Function of the Skin 13.2 Skin Conditions and Disorders 13.3 Facial Procedures, Skin Analysis, Exfoliation and Enhancement Products 13.4 Temporary Methods of Hair Removal 13.5 Make-Up Application, Eyebrow Contouring and Lash Services
14 Chapter 14: The New York Practical Examination
14.1 Practical Exam Format, Scheduling, Admittance and Results 14.2 Work Area Setup, Mannequin Preparation and the Haircutting Procedure 14.3 Blow-Dry, Thermal Curling, Roller Placement, Perm Panel, Pin Curl Wave and Finger Wave 14.4 Chemical Service Simulations: Foiling, Haircolour Retouch and Relaxer
10.2 Chemical Restructuring Products and Processing Dynamics
Key Takeaways Explain This Topic AI
Alkaline or cold waves use ammonium thioglycolate at pH 9.0 to 9.6 and process at room temperature.
Acid-balanced waves process at pH 4.5 to 7.0 and usually require added heat from a hooded dryer.
Exothermic waves generate their own heat through a chemical reaction when the activator is mixed in.
Overprocessing breaks too many disulphide bonds, producing weak, frizzy or straight hair that cannot be corrected.
The neutraliser is hydrogen peroxide at roughly 2% concentration and pH 2.5 to 4.5, which re-forms the disulphide bonds by oxidation.
Last updated: August 2026
Chemical Restructuring Products and Processing Dynamics
Exam Focus: The formulation table and the overprocessing-versus-underprocessing distinction are the two highest-yield items here. Remember that overprocessing produces limp, frizzy or straight hair — the opposite of what candidates instinctively expect — and that the damage cannot be corrected, only cut off and conditioned.
1. Comprehensive Permanent Wave Formulations
Cosmetology state board examinations categorize permanent wave solutions into distinct chemical formulations based on their active ingredients, pH range, heat activation requirements, and client indications:
Perm Formulation Active Reducing Agent pH Range Heat Source / Activation Recommended Hair Type & Results
Alkaline Cold Waves Ammonium Thioglycolate (ATG) 9.0 – 9.6 Room temperature (No heat) Coarse, thick, non-porous, or resistant hair; creates strong, firm, crisp curls.
True Acid Waves Glyceryl Monothioglycolate (GMTG) 4.5 – 7.0 Endothermic (Requires outside heat / hood dryer) Extremely fragile, fine, highlighted, or chemically damaged hair; produces soft, loose, natural waves.
Acid-Balanced Waves ATG + GMTG 7.8 – 8.2 Room temperature or gentle dryer Porous, normal, or color-treated hair; processes faster than true acid waves and yields firmer curls.
Exothermic Waves ATG + Oxidizing activator (H2O2) 9.0 – 9.3 Exothermic (Self-heating chemical reaction) Coarse, resistant, or normal hair; heats itself to open cuticle without external hood dryer.
Endothermic Waves GMTG or ATG 7.0 – 8.5 Endothermic (Requires external heat / hood dryer) Fine, porous, or chemically treated hair needing heat activation to penetrate closed cuticle scales.
Ammonia-Free Waves Alkanolamines (AMP / MEA) + Thio 7.0 – 9.6 Room temperature Low-odor salon environment; substitutes monoethanolamine (MEA) or aminomethylpropanol (AMP) for ammonia.
Thio-Free Waves Cysteamine / Mercaptamine 7.0 – 9.0 Room temperature Clients seeking gentler, low-odor alternatives; requires careful timing to avoid overprocessing.
Low-pH Waves Ammonium / Sodium Bisulfite 6.5 – 7.0 Room temperature or warm dryer Body waves and subtle movement on fine or delicate hair; temporary or soft wave retention. ┌─────────────────────────────────────────────────────────────────────────────┐
- │ EXOTHERMIC vs. ENDOTHERMIC WAVES │
- ├─────────────────────────────────────────────────────────────────────────────┤
- │ EXOTHERMIC WAVES: │
- │ • "Exo" = Outside / Release; "Thermic" = Heat. │
- │ • Chemical mixing: The cosmetologist mixes an oxidizing activator │
- │ (containing hydrogen peroxide) directly into the waving lotion bottle. │
- │ • The chemical reaction produces its OWN internal heat, warming the │
- │ solution to accelerate penetration and processing without a hood dryer. │
- │ │
- │ ENDOTHERMIC WAVES: │
- │ • "Endo" = Inside / Absorb; "Thermic" = Heat. │
- │ • Absorbs heat from an EXTERNAL heat source (such as a plastic cap under │
- │ a preheated hooded dryer). │
- │ • The lotion will NOT process properly at ambient room temperature. │
- └─────────────────────────────────────────────────────────────────────────────┘
- 2. Processing Time Dynamics: Overprocessing vs. Underprocessing
During a permanent wave service, processing is not linear. Approximately 50% of the hair's disulfide bonds are broken within the first 5 to 10 minutes of lotion application. The remaining processing time allows the solution to penetrate deeper into the inner cortex cells and stabilize the reduction. ┌───────────────────────────────────┐ ┌───────────────────────────────────┐
- │ OVERPROCESSED HAIR │ │ UNDERPROCESSED HAIR │
- ├───────────────────────────────────┤ ├───────────────────────────────────┤
- │ • Cause: Solution left on too │ │ • Cause: Solution rinsed too │
- │ long; broke >70% of S-S bonds. │ │ soon; broke <50% of S-S bonds. │
- │ • Cortex loses structural tensile │ │ • Hair lacks sufficient broken │
- │ strength and elasticity. │ │ bonds to conform to rod. │
- │ • Appearance: Frizzy, fuzzy, dry, │ │ • Appearance: Limp, weak wave │
- │ curly at roots but straight/ │ │ pattern; straightens out when │
- │ damaged at porous ends. │ │ brushed or shampooed. │
- │ • Treatment: Cannot re-perm; │ │ • Treatment: Can be re-permed │
- │ requires conditioning & haircut.│ │ using milder formulation. │
- └───────────────────────────────────┘ └───────────────────────────────────┘
- 3. Neutralization Chemistry & Clinical Protocol
Neutralization (also referred to as re-bonding or oxidation ) is the second, equally critical chemical stage of permanent waving. Neutralization serves two indispensable clinical functions:
Deactivates residual waving lotion: It arrests the reduction process and stops further bond cleavage.
Rebuilds disulfide bonds: It removes hydrogen atoms to re-establish covalent sulfur-to-sulfur cross-links, locking the keratin chains permanently into their new curly configuration.
Neutralizer Chemistry
Active Ingredient: Hydrogen Peroxide ( H 2 O 2 H_2O_2 H 2 O 2 ) at an acidic concentration of 2% to 3% (5 to 10 volume) .
pH Range: 3.0 to 4.0 (acidic, which contracts and hardens the swollen cuticle scales).
Chemical Reaction: 2 Cysteine-SH + H 2 O 2 ⟶ Cystine-S-S-Cystine + 2 H 2 O 2\text{ Cysteine-SH} + \text{H}_2\text{O}_2 \longrightarrow \text{Cystine-S-S-Cystine} + 2\text{ H}_2\text{O} 2 Cysteine-SH + H 2 O 2 ⟶ Cystine-S-S-Cystine + 2 H 2 O
The oxygen in the hydrogen peroxide neutralizer extracts the added hydrogen atoms from the cysteine sulfhydryl groups (-SH), forming water ( H 2 O H_2O H 2 O ) as a byproduct and forcing the sulfur atoms to re-link into new cystine disulfide bonds ( S − S S-S S − S ).
Clinical Rinsing & Towel Blotting Standards
State Board Safety Standard: Before applying the neutralizer, the cosmetologist must rinse the waving lotion from the rods with warm water for a minimum of 5 full minutes .
After thorough rinsing, the stylist must blot every rod extensively with dry cotton towels until a clean paper towel pressed against the rods shows zero water transfer. Inadequate blotting leaves excess water in the hair, which dilutes the acidic neutralizer and leads to incomplete bond reformation, weak curl retention, and premature curl relaxation.