Study guide

11.4 Developer Chemistry, Vegetable Dyes and Metallic Salts

New York Cosmetology Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: New York Licensing Law & Professional Requirements

1.1 GBL Article 27, Scope of Practice & Who Must Be Licensed 1.2 Qualifying for Licensure: Age, 1,000 Hours, Health Certificate & the Temporary Licence 1.3 The Written and Practical Examinations: Format, Fees, Admittance & Results 1.4 Licence Term, Renewal, Lapse, Fees & Out-of-State Applicants 1.5 State and Federal Payroll and New York Sales Tax Requirements 1.6 Professional Ethics, Conduct & the Domestic Violence and Sexual Assault Awareness Requirement 1.7 Career Opportunities, Placement, Professional Organizations & Trade Shows

2 Chapter 2: Safety and Health — New York Salon Regulation

2.1 Salon Facilities, Plumbing and Nail-Salon Ventilation Standards 2.2 Business Licensing, Bonds, Mandatory Postings, Inspections and Penalties 2.3 OSHA Hazard Communication, Safety Data Sheets, Chemical Storage & Labelling 2.4 Hygienic Practices, Sanitary Dress, Towels and Linens

3 Chapter 3: Infection Control

3.1 Types, Classification, Growth and Reproduction of Infectious Organisms 3.2 Viruses, Fungi, Parasites and Modes of Transmission 3.3 Immunity and Body Defenses 3.4 Decontamination Levels, Physical and Chemical Agents 3.5 New York Implement Reprocessing and Prohibited Items (§§ 160.17, 160.18) 3.6 Blood, Body Fluids and Client Contact Procedures (§ 160.19)

4 Chapter 4: Anatomy, Physiology & Nutrition

4.1 Cells, Tissues, Organs and the Body Systems 4.2 Bones of the Head, Face, Neck, Arms, Hands, Legs and Feet 4.3 Muscles of the Head, Face, Neck, Arms and Legs 4.4 The Circulatory System and Blood Supply of the Head, Face and Neck 4.5 The Nervous System and the Cranial Nerves 4.6 Basic Principles of Nutrition

5 Chapter 5: Chemistry as Applied to Cosmetology

5.1 Matter, Elements, Compounds, Mixtures and Chemical Reactions 5.2 Solutions, Suspensions, Emulsions and Oxidation-Reduction Reactions 5.3 The pH Scale and FDA Law Governing Hair Care Products

6 Chapter 6: Hair Analysis, Scalp and Hair Disorders

6.1 Hair Structure: Root, Shaft and the Three Layers 6.2 Chemical Composition, Side Bonds and Hair Pigment 6.3 Growth Cycles, Growth Patterns and Wave Patterns 6.4 Hair Analysis: Texture and Density 6.5 Porosity, Elasticity and Other Diagnostic Factors 6.6 Dandruff, Alopecia and Hair Shaft Disorders 6.7 Fungal Infections, Infestations and Bacterial Infections

7 Chapter 7: Shampoos, Rinses, Conditioners & Treatments

7.1 Client Preparation, Draping, Analysis and Consultation 7.2 Hair Analysis Instruments and Equipment 7.3 Shampoo, Rinse and Conditioner Products, Composition and Procedures 7.4 The Scalp, Manipulations and Treatments for Hair and Scalp Disorders

8 Chapter 8: Hair Cutting and Shaping

8.1 Fundamentals of Design: Reference Points, Lines and Sections 8.2 Elevation, Guidelines and Overdirection 8.3 Scissor Haircutting: Nomenclature, Care of Shears and Grip 8.4 Razor Haircutting, Clippers, Combs and Ergonomics 8.5 Scissor Techniques: Blunt, Graduated, Uniform and Long-Layered Cuts 8.6 Texturising, Clipper Cutting and Cross-Checking 8.7 Contemporary and Specialised Haircutting: Female, Male and Children's Styles 8.8 Shaving, Mustache and Beard Shaping

9 Chapter 9: Hair Styling

9.1 Wet Styling Science, Finger Waving and Skip Waving 9.2 Pin Curling 9.3 Roller Styling and Patterns in Hairstyling 9.4 Finishing Techniques 9.5 Tools, Implements and Blow-Dry Styling 9.6 Thermal Curling and Flat Ironing 9.7 Hair Pressing 9.8 Twisting, Wrapping, Weaving, Extending, Locking and Braiding 9.9 Hair Pieces, Wigs and Extensions

10 Chapter 10: Chemical Restructuring

10.1 The Chemistry of Chemical Restructuring 10.2 Chemical Restructuring Products and Processing Dynamics 10.3 Client Consultation and Preliminary Procedures for Chemical Services 10.4 Permanent Waving: Rods, Wrapping Techniques and Procedures 10.5 Chemical Relaxers: Products and Application 10.6 Curl Re-formation and Corrective Chemical Restructuring

11 Chapter 11: Hair Coloring and Lightening

11.1 Colour Theory and the Law of Colour 11.2 Tone, Intensity, the Level System and Underlying Pigment 11.3 Classifications of Haircolour: Temporary Through Permanent 11.4 Developer Chemistry, Vegetable Dyes and Metallic Salts 11.5 Client Consultation and Preliminary Procedures for Colour 11.6 Hair Lightening, Decolorisation and Toning 11.7 Special Effects: Foiling, Balayage and Dimensional Placement 11.8 Corrective Colour Procedures

12 Chapter 12: Nail Care and Procedures

12.1 Nail Structure, Growth, and Nail Shape and Colour Analysis 12.2 Nail Disorders and Diseases 12.3 Manicuring, Pedicuring and Manipulations of the Hand, Arm, Leg and Foot 12.4 Foot Spa Sanitation and New York's Prohibited Implements 12.5 Nail Tips, Wraps, Liquid and Powder Extensions and Gels

13 Chapter 13: Skin Care and Procedures

13.1 Structure and Function of the Skin 13.2 Skin Conditions and Disorders 13.3 Facial Procedures, Skin Analysis, Exfoliation and Enhancement Products 13.4 Temporary Methods of Hair Removal 13.5 Make-Up Application, Eyebrow Contouring and Lash Services

14 Chapter 14: The New York Practical Examination

14.1 Practical Exam Format, Scheduling, Admittance and Results 14.2 Work Area Setup, Mannequin Preparation and the Haircutting Procedure 14.3 Blow-Dry, Thermal Curling, Roller Placement, Perm Panel, Pin Curl Wave and Finger Wave 14.4 Chemical Service Simulations: Foiling, Haircolour Retouch and Relaxer

11.4 Developer Chemistry, Vegetable Dyes and Metallic Salts

Key Takeaways Explain This Topic AI

Hydrogen peroxide developer is measured in volumes: 10 volume deposits, 20 volume lifts one to two levels, 30 volume lifts two to three, and 40 volume lifts three to four.

Volume divided by approximately 3.3 gives the percentage concentration, so 20 volume is about 6% and 40 volume is about 12%.

Raising the developer volume increases lift and decreases deposit, which is why 100% grey coverage is a 20-volume job.

Pure henna is a vegetable coating dye that blocks oxidative colour, lighteners and waving solution and resists colour remover, while compound henna and progressive restorers add metallic salts that react violently with peroxide.

In the metallic salts strand test, lead lightens rapidly, silver or bismuth produces no reaction at all, and copper makes the solution boil and the strand pull apart; any of the three means refusing every oxidative and restructuring service.

Last updated: August 2026

Developer Chemistry, Vegetable Dyes and Metallic Salts

Exam Focus: Developer volume and its lift capability is the single most-used piece of knowledge in a colour salon, and the volume-to-percentage conversion is examinable arithmetic. The metallic salts material is safety-critical: a positive test means refusing every oxidative and restructuring service, not reducing the developer volume.

1. What a Developer Actually Does

Hydrogen peroxide (H₂O₂) is the oxidising agent — the developer — in every permanent and demi-permanent haircolour and in every on-scalp lightener. Candidates lose marks here because they learn the volume chart without ever learning what the chemical is doing, and then cannot answer a question phrased as a reason rather than a number.

A developer does two jobs at the same time , and both are oxidations:

Lift. Released oxygen diffuses the client's natural melanin, breaking the large pigment granules into smaller, colourless fragments. This is what raises the level.

Deposit. The same oxygen converts the small, colourless aniline derivative dye precursors in the colour into large coloured molecules that couple together inside the cortex and are then physically too big to wash back out.

The alkalising agent in the colour — ammonia, or monoethanolamine (MEA) in low-odour lines — is not the lifting agent. Its job is to swell the cuticle so the mixture can enter, and to raise the pH so the peroxide decomposes quickly enough to be useful. This is a favourite exam trap: "ammonia lifts and peroxide deposits" is wrong in both halves. The alkalising agent opens the door; the peroxide does both the lifting and the depositing. Chapter 5.2 covers the underlying oxidation-reduction chemistry; here the practical point is that a developer is useless on its own and dangerous when mismatched.

Why the bottle is acidic

Straight out of the bottle, peroxide sits at a pH of about 2.5 to 4.5 . That acidity is a deliberate stabiliser: at low pH the molecule holds its extra oxygen atom and the product keeps its labelled strength for months. The moment it meets an alkaline colour or lightener at pH 9 to 10.5, decomposition accelerates and the service begins. That single fact explains every storage rule you will be asked about.

Store in the original opaque bottle , tightly capped, in a cool dark place. Light and heat both catalyse decomposition, and a developer that has lost strength under-processes without any visible warning.

Never mix colour in a metal bowl and never use metal clips on processing hair. Metal ions catalyse peroxide decomposition and can distort the result.

Never pour unused mixed colour back into the developer bottle. The mixture continues to release oxygen gas, and a sealed bottle can build pressure. Mixed product is discarded, not stored.

Buy and rotate stock so that developer is used well inside its shelf life; a bottle that has been opened repeatedly and stored warm is no longer the volume printed on the label.

The New York rules that attach to your developer shelf

New York regulates the bottle as much as the technique, and these three citations are examinable together:

19 NYCRR § 160.26 — every product used in the business must keep its original manufacturer labelling intact , and poisonous or corrosive substances must be distinctly marked. Decanting developer into an unlabelled squeeze bottle at the station is a violation on its own.

19 NYCRR § 160.25 — a Safety Data Sheet must be available on the premises for each product used, developer included. Section 2.3 covers the full hazard-communication duty.

19 NYCRR § 160.12 — restrictions on open sources of ignition. Peroxide is an oxidiser: it does not burn by itself, but it feeds a fire that has already started, which is why storage away from heat is a regulatory matter and not merely good housekeeping.

2. Volume, Percentage and the Arithmetic

Developer strength is printed in two systems, and an exam question may give you either one and ask for the other.

Volume (vol) measures the volume of oxygen gas that one volume of the solution can release. One litre of 20-volume developer can liberate roughly twenty litres of oxygen gas.

Percentage (%) measures the actual proportion of pure hydrogen peroxide in the water.

The two are linked by a constant you should memorise: volume ÷ 3.3 ≈ percentage , and percentage × 3.3 ≈ volume .

20 ÷ 3.3 = 6.06, so 20 volume ≈ 6% .

30 ÷ 3.3 = 9.09, so 30 volume ≈ 9% .

9% × 3.3 = 29.7, so a 9% developer is a 30 volume .

12% × 3.3 = 39.6, so a 12% developer is a 40 volume .

Detailed Developer Comparison Table

Volume Percentage Typical levels of lift Primary clinical applications and safety

10 volume 3% 0 to 1 level Deposit-only work: demi-permanent colour, post-lightening toners, going darker. Minimises cuticle disruption.

20 volume 6% 1 to 2 levels The industry standard. Permanent colour for standard lift, 100% grey coverage, and on-scalp lighteners.

30 volume 9% 2 to 3 levels Higher lift with permanent colour; commonly paired with off-scalp foil highlighting.

40 volume 12% 3 to 4 levels High-lift permanent blondes and off-scalp foils. Professional hair lines are not formulated above this strength.

Diluting a developer

Because volume scales linearly, equal parts of two developers give you the average of the two.

Equal parts 20 volume and 10 volume produce a 15 volume .

Equal parts 40 volume and 20 volume produce a 30 volume .

Worked example. You need 2 ounces of 30 volume, and the shelf holds only 40 volume and 20 volume. Measure 1 ounce of each: the result is 2 ounces at 30 volume. Dilute only with developer of the same brand and system, or with distilled water if — and only if — the manufacturer's directions permit it. Never thin a developer with tap water, conditioner or shampoo to "make it gentler"; you change the chemistry and the processing time in ways you cannot predict, and you leave the manufacturer's directions, which § 160.26 assumes you are following.

3. Choosing the Developer: a Repeatable Decision

Work the same five steps every time, and the choice stops being guesswork.

Establish the natural level at the scalp (Chapter 11.2).

Establish the target level .

Subtract: levels of lift required .

Match the lift to a volume from the table above.

Decide on-scalp or off-scalp , because that constrains the answer independently of the arithmetic.

Example one. Natural level 5, target level 7. Two levels of lift, so 20 volume with a permanent colour.

Example two. Level 6 natural with 80% grey, target the same level 6 with full coverage. This is a deposit-heavy job, not a lift job: 20 volume with a permanent colour containing enough natural or neutral base. Going up to 30 or 40 volume here makes coverage worse .

Example three. Level 7 natural, target a level 10 high-lift blonde. Three to four levels, so 40 volume with a high-lift permanent — and off-scalp in foils, because 40 volume on the scalp is outside almost every manufacturer's directions.

Four traps built into these decisions

More volume does not mean more colour. As volume rises, lifting increases and depositing decreases. That is the mechanical reason 40 volume gives poor grey coverage.

You cannot rescue under-processing by adding volume mid-service. If the formula was wrong, the answer is to stop, rinse, reassess and reformulate at the next appointment.

The mixing ratio is part of the formula. Permanent colour is commonly mixed 1:1, while high-lift shades and many demi-permanent lines call for 1:1.5 or 1:2. Changing the ratio changes both the consistency and the amount of peroxide available, so follow the ratio the manufacturer prints.

Heat is not a shortcut. Added heat accelerates peroxide decomposition, and most manufacturers prohibit supplemental heat with 30 and 40 volume on the scalp. Chapter 11.6 covers the on-scalp lightening rules in full.

4. Vegetable and Natural Dyes

Not every colour a client has used is a professional oxidative product, and the two families below are the reason the consultation question "what have you put on your hair at home?" is a safety question rather than a courtesy.

Henna is a vegetable dye made from the dried, powdered leaves and stems of Lawsonia inermis . Its active molecule, lawsone , stains the keratin of the cuticle and outer cortex a characteristic reddish-orange. Henna is a coating dye : it does not lift, it cannot be lightened predictably, and it builds up with every application into a dense layer that physically blocks oxidative colour, lightener and permanent wave solution from reaching the cortex. Heavily hennaed hair feels stiff and coated, processes unevenly or not at all, and the only reliable remedies are to grow it out or cut it off . Because henna is not an oxidative dye, an oxidative colour remover has nothing to act on and will not strip it.

Other traditional plant dyes behave the same way. Chamomile deposits a pale yellow stain, indigo deposits blue-black and is frequently layered over henna to create a "black henna" effect, and sage darkens gradually. All of them coat, none of them lift, and all of them interfere with subsequent chemical services.

Compound henna is the dangerous member of the family: plant dye that has been adulterated with metallic salts to make the colour build faster and last longer. A client who says "it was just henna, it's natural" may be describing a compound product, which is exactly why you test rather than take a history at face value.

5. Metallic Salts and Progressive Colour Restorers

Metallic dyes are sold to consumers as gradual , progressive or colour restorer products, most often marketed to men for reducing grey. They are formulated with metallic salts such as lead acetate , silver nitrate , copper sulfate or bismuth citrate .

The mechanism is not oxidation at all. The metal reacts with sulfur in the hair's keratin to deposit dark metal sulfides on and just inside the cuticle. Each application adds another layer, so the hair darkens progressively over a week or two — and the result is a characteristically dull, flat, opaque colour that often turns greenish, purplish or brassy in daylight. Metallic build-up also makes hair feel harsh and brittle and blocks penetration in the same way henna does.

Current federal status. The FDA terminated the colour additive listing for lead acetate in hair dyes (formerly 21 CFR § 73.2396). The rule was published in 2018, stayed while objections were considered, and the stay was lifted effective 6 January 2022 , so lead acetate is no longer a lawful colour additive in hair dyes sold in the United States. This does not make the topic historical: old bottles remain in clients' bathrooms, and imported or online products still contain lead, silver, copper and bismuth compounds. Chapter 5.3 covers the wider FDA framework for hair care products.

Why this is a safety emergency, not a formulation problem

Critical safety rule: Never apply permanent haircolour, lightener or permanent wave or relaxer solution over hair carrying metallic salts.

When hydrogen peroxide or a persulfate booster meets metallic salts — copper and lead especially — the metal catalyses a violently fast, exothermic decomposition. The mixture can heat rapidly, steam or smoke, and give off a foul odour, while the hair swells, turns dark or gummy and can break off at the scalp or disintegrate in the bowl. Clients have been burned. A milder but still service-ending version of the same problem occurs in permanent waving, where the metallic layer causes wildly uneven processing and discoloration.

6. The Metallic Salts Test

Any doubt about home colour is settled with a strand test before a chemical service, not after.

In a glass or plastic bowl — never metal — mix 1 ounce (30 mL) of 20-volume hydrogen peroxide with 20 drops of 28% ammonium hydroxide (ammonia) .

Cut about 20 strands of hair from an inconspicuous area, bind one end, and immerse the strand fully.

Leave it at room temperature for 30 minutes , then read the result.

  • Observation after 30 minutes Interpretation Action
  • Strand lightens only very slightly No metallic salts present Proceed with normal preliminary tests
  • Strand lightens rapidly Lead present Refuse all oxidative and restructuring services
  • No reaction at all Silver (or bismuth) present Refuse; oxidative colour cannot penetrate the coating

Solution boils , gives off a foul odour , and the strand pulls apart easily Copper present Refuse; this is the violent-reaction case

Read that table carefully, because two of the four results are counter-intuitive and both are examined. Lead lightens quickly — it does not turn the strand black. Silver produces no reaction whatsoever , and it is precisely that absence of change that identifies it; a candidate who has been taught "positive means bubbling" will call a silver result negative and then destroy the client's hair.

If the test is positive

Decline the oxidative colour, the lightener, and any permanent wave or relaxer. There is no reduced-volume version of this service that is safe.

Explain plainly what was found and why, without diagnosing the product the client used.

Offer what is genuinely available: a non-oxidative temporary or deposit-only rinse where the manufacturer's directions allow it over coated hair, conditioning treatments, and a cutting plan that removes the coated hair over time.

Record the test, the observation and the refusal on the client card , along with the recommendation given. Chapter 11.5 covers the documentation standard for preliminary procedures.

7. Exam Traps in This Section

20 volume is 6%, not 20%. The conversion is divide by 3.3 .

Grey coverage is a 20 volume job; raising the volume reduces deposit.

Peroxide is stabilised acidic ; the alkalising agent in the colour triggers it.

Henna is a coating dye and cannot be stripped with a colour remover.

Metallic salts darken the hair through metal sulfides , not through oxidation.

A silver result in the strand test is no reaction — still a refusal.

Loading diagram... Choosing a Developer and Screening for Metallic Salts