Study guide

8.5 Scissor Techniques: Blunt, Graduated, Uniform and Long-Layered Cuts

New York Cosmetology Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: New York Licensing Law & Professional Requirements

1.1 GBL Article 27, Scope of Practice & Who Must Be Licensed 1.2 Qualifying for Licensure: Age, 1,000 Hours, Health Certificate & the Temporary Licence 1.3 The Written and Practical Examinations: Format, Fees, Admittance & Results 1.4 Licence Term, Renewal, Lapse, Fees & Out-of-State Applicants 1.5 State and Federal Payroll and New York Sales Tax Requirements 1.6 Professional Ethics, Conduct & the Domestic Violence and Sexual Assault Awareness Requirement 1.7 Career Opportunities, Placement, Professional Organizations & Trade Shows

2 Chapter 2: Safety and Health — New York Salon Regulation

2.1 Salon Facilities, Plumbing and Nail-Salon Ventilation Standards 2.2 Business Licensing, Bonds, Mandatory Postings, Inspections and Penalties 2.3 OSHA Hazard Communication, Safety Data Sheets, Chemical Storage & Labelling 2.4 Hygienic Practices, Sanitary Dress, Towels and Linens

3 Chapter 3: Infection Control

3.1 Types, Classification, Growth and Reproduction of Infectious Organisms 3.2 Viruses, Fungi, Parasites and Modes of Transmission 3.3 Immunity and Body Defenses 3.4 Decontamination Levels, Physical and Chemical Agents 3.5 New York Implement Reprocessing and Prohibited Items (§§ 160.17, 160.18) 3.6 Blood, Body Fluids and Client Contact Procedures (§ 160.19)

4 Chapter 4: Anatomy, Physiology & Nutrition

4.1 Cells, Tissues, Organs and the Body Systems 4.2 Bones of the Head, Face, Neck, Arms, Hands, Legs and Feet 4.3 Muscles of the Head, Face, Neck, Arms and Legs 4.4 The Circulatory System and Blood Supply of the Head, Face and Neck 4.5 The Nervous System and the Cranial Nerves 4.6 Basic Principles of Nutrition

5 Chapter 5: Chemistry as Applied to Cosmetology

5.1 Matter, Elements, Compounds, Mixtures and Chemical Reactions 5.2 Solutions, Suspensions, Emulsions and Oxidation-Reduction Reactions 5.3 The pH Scale and FDA Law Governing Hair Care Products

6 Chapter 6: Hair Analysis, Scalp and Hair Disorders

6.1 Hair Structure: Root, Shaft and the Three Layers 6.2 Chemical Composition, Side Bonds and Hair Pigment 6.3 Growth Cycles, Growth Patterns and Wave Patterns 6.4 Hair Analysis: Texture and Density 6.5 Porosity, Elasticity and Other Diagnostic Factors 6.6 Dandruff, Alopecia and Hair Shaft Disorders 6.7 Fungal Infections, Infestations and Bacterial Infections

7 Chapter 7: Shampoos, Rinses, Conditioners & Treatments

7.1 Client Preparation, Draping, Analysis and Consultation 7.2 Hair Analysis Instruments and Equipment 7.3 Shampoo, Rinse and Conditioner Products, Composition and Procedures 7.4 The Scalp, Manipulations and Treatments for Hair and Scalp Disorders

8 Chapter 8: Hair Cutting and Shaping

8.1 Fundamentals of Design: Reference Points, Lines and Sections 8.2 Elevation, Guidelines and Overdirection 8.3 Scissor Haircutting: Nomenclature, Care of Shears and Grip 8.4 Razor Haircutting, Clippers, Combs and Ergonomics 8.5 Scissor Techniques: Blunt, Graduated, Uniform and Long-Layered Cuts 8.6 Texturising, Clipper Cutting and Cross-Checking 8.7 Contemporary and Specialised Haircutting: Female, Male and Children's Styles 8.8 Shaving, Mustache and Beard Shaping

9 Chapter 9: Hair Styling

9.1 Wet Styling Science, Finger Waving and Skip Waving 9.2 Pin Curling 9.3 Roller Styling and Patterns in Hairstyling 9.4 Finishing Techniques 9.5 Tools, Implements and Blow-Dry Styling 9.6 Thermal Curling and Flat Ironing 9.7 Hair Pressing 9.8 Twisting, Wrapping, Weaving, Extending, Locking and Braiding 9.9 Hair Pieces, Wigs and Extensions

10 Chapter 10: Chemical Restructuring

10.1 The Chemistry of Chemical Restructuring 10.2 Chemical Restructuring Products and Processing Dynamics 10.3 Client Consultation and Preliminary Procedures for Chemical Services 10.4 Permanent Waving: Rods, Wrapping Techniques and Procedures 10.5 Chemical Relaxers: Products and Application 10.6 Curl Re-formation and Corrective Chemical Restructuring

11 Chapter 11: Hair Coloring and Lightening

11.1 Colour Theory and the Law of Colour 11.2 Tone, Intensity, the Level System and Underlying Pigment 11.3 Classifications of Haircolour: Temporary Through Permanent 11.4 Developer Chemistry, Vegetable Dyes and Metallic Salts 11.5 Client Consultation and Preliminary Procedures for Colour 11.6 Hair Lightening, Decolorisation and Toning 11.7 Special Effects: Foiling, Balayage and Dimensional Placement 11.8 Corrective Colour Procedures

12 Chapter 12: Nail Care and Procedures

12.1 Nail Structure, Growth, and Nail Shape and Colour Analysis 12.2 Nail Disorders and Diseases 12.3 Manicuring, Pedicuring and Manipulations of the Hand, Arm, Leg and Foot 12.4 Foot Spa Sanitation and New York's Prohibited Implements 12.5 Nail Tips, Wraps, Liquid and Powder Extensions and Gels

13 Chapter 13: Skin Care and Procedures

13.1 Structure and Function of the Skin 13.2 Skin Conditions and Disorders 13.3 Facial Procedures, Skin Analysis, Exfoliation and Enhancement Products 13.4 Temporary Methods of Hair Removal 13.5 Make-Up Application, Eyebrow Contouring and Lash Services

14 Chapter 14: The New York Practical Examination

14.1 Practical Exam Format, Scheduling, Admittance and Results 14.2 Work Area Setup, Mannequin Preparation and the Haircutting Procedure 14.3 Blow-Dry, Thermal Curling, Roller Placement, Perm Panel, Pin Curl Wave and Finger Wave 14.4 Chemical Service Simulations: Foiling, Haircolour Retouch and Relaxer

8.5 Scissor Techniques: Blunt, Graduated, Uniform and Long-Layered Cuts

Key Takeaways Explain This Topic AI

The standard four-section parting divides the head down the centre from front hairline to nape and across from ear to ear.

The blunt or one-length cut uses 0-degree elevation and a stationary perimeter guideline.

The graduated cut uses 45-degree elevation and a travelling guideline, building weight at the perimeter.

The uniform layered cut uses 90-degree elevation with vertical partings and a travelling guideline.

The long-layered cut uses 180-degree elevation with a stationary guideline at the top, preserving maximum perimeter length.

Last updated: August 2026

Scissor Techniques: The Four Foundational Haircuts

Exam Focus: The New York practical examination requires a 0-degree perimeter followed by a 90-degree layered cut using vertical partings, so those two techniques must be executed under time pressure. Learn all four foundational cuts by their elevation and guideline signature, and learn the execution order: section, establish the perimeter, then layer.

1. Haircut Sectioning & Parting Systems

Precise sectioning provides total control over the hair mass, ensuring clean sub-partings and clear visibility of guidelines. STANDARD 4-SECTION PARTING STANDARD 5-SECTION PARTING

  • Front Hairline Front Hairline
  • │ │
  • Section 1 │ Section 2 Section 1 │ Section 2
  • (Right Front) │ (Left Front) (Right Front) │ (Left Front)
  • ────────────────┼──────────────── ────────────────┼────────────────
  • (Apex to Ear) │ (Apex to Ear) (Radial Line) │ (Radial Line)
  • Section 3 │ Section 4 Section 3 │ Section 4
  • (Right Back) │ (Left Back) (Right Back) │ (Left Back)
  • │ ────────┼────────
  • Center Nape Section 5 (Horseshoe / Crown)
  • The Standard 4-Section Parting

Center Profile Parting: Draw a clean parting from the center of the front hairline, through the apex, straight down to the center nape, dividing the head into right and left halves.

Radial Parting: Draw a parting from the apex down to the top of the ear on both sides, creating four distinct quadrants (two front quadrants and two back quadrants).

Secure each quadrant with sectioning clips. Subsections are then taken parallel or diagonal within these quadrants.

2. The Blunt (One-Length / Bob) Haircut (0° Elevation)

The Blunt Cut (also known as a one-length cut, pageboy, or classic bob) is the purest expression of weight building. All hair strands fall to one single stationary perimeter level. ┌─────────────────────────────────────────────────────────────────────────────┐

  • │ BLUNT HAIRCUT CLINICAL SPECIFICATIONS │
  • ├─────────────────────────────────────────────────────────────────────────────┤
  • │ • Elevation: Exactly 0° (Combed flat in natural fall against neck/cape). │
  • │ • Guideline: Stationary guideline established at the center nape. │
  • │ • Partings: Horizontal or slight diagonal forward (1/4" to 1/2" thick). │
  • │ • Tension: Minimal to zero tension (especially over ears & shoulders). │
  • │ • Head Position: Tilted slightly forward at nape; fully upright for sides. │
  • └─────────────────────────────────────────────────────────────────────────────┘
  • Step-by-Step Execution Procedure

Client Preparation & Draping: Shampoo and condition hair; drape client with neck strip and waterproof cutting cape. Comb wet hair thoroughly to remove all tangles.

Sectioning: Establish a standard 4-section parting.

Establishing Nape Guideline:

Have the client tilt head slightly forward. This stretches the nape skin; when the head returns upright, the underside hair retracts slightly, preventing under-hair from peeking out beneath the perimeter line.

Take a 1/4-inch horizontal subsection at the lower nape. Comb hair down flat with fine teeth at 0° elevation.

Cut from the center of the nape outward to the left, then from the center outward to the right, establishing the stationary horizontal baseline guideline.

Working Through the Back: Take subsequent 1/4-inch to 1/2-inch horizontal subsections up to the occipital bone and crown. Let each subsection fall naturally over the stationary guide; cut parallel to the guide line.

Transitioning to the Sides:

Have the client hold head straight and upright.

Take horizontal subsections on the sides. Incorporate a small guide from the back perimeter.

Tension Management Around Ears: Use the wide teeth of the comb or tap hair lightly with fingers above the ear (zero tension) to allow for the protrusion of the ear. Pulling hair tightly over the ear creates an unwanted scalloped hollow in the side perimeter once dry.

Finishing: Check the perimeter for symmetry on both sides.

3. The Graduated Haircut (45° Elevation / Wedge / Stacked Bob)

The Graduated Cut builds a concentrated band of stacked weight in the lower interior, creating a beveled edge that tapers smoothly toward the perimeter. ┌─────────────────────────────────────────────────────────────────────────────┐

  • │ GRADUATED HAIRCUT CLINICAL SPECIFICATIONS │
  • ├─────────────────────────────────────────────────────────────────────────────┤
  • │ • Elevation: 45° elevation (held between 1° and 89° from scalp). │
  • │ • Guideline: Stationary baseline transitioning to traveling interior guide.│
  • │ • Partings: Diagonal forward, diagonal back, or horizontal partings. │
  • │ • Tension: Medium, consistent tension throughout. │
  • │ • Silhouette: Stacked, beveled weight line below the parietal ridge. │
  • └─────────────────────────────────────────────────────────────────────────────┘
  • Step-by-Step Execution Procedure

Sectioning: Create a 4-section parting. Often, a horseshoe or diagonal parting is created at the occipital bone.

Establishing Perimeter: Cut the perimeter guideline at 0° elevation at the nape to establish total design length.

Elevating to 45°:

Take a 1/2-inch diagonal forward or horizontal subsection above the nape guide.

Comb hair smooth and elevate the subsection to a 45° angle away from the head.

Cut hair holding fingers at a 45° angle parallel to the parting line, referencing the underlying guide.

Progressing Through Occipital & Crown:

Continue taking parallel subsections up through the back. Maintain a steady 45° projection.

Each cut subsection creates a traveling guide for the next subsection, stacking hair lengths so that exterior lengths are shorter and interior lengths fall slightly longer over them.

Sides & Face Framing: Work forward into side quadrants using matching diagonal partings. Overdirect side hair slightly backward if an elongated front A-line silhouette is desired.

4. The Uniform Layered Haircut (90° Elevation)

The Uniform Layered Cut (also known as a 90° layered cut or circular shape) removes weight evenly across the entire cranium. All hair strands are cut to the exact same length, following the curvature of the head. ┌─────────────────────────────────────────────────────────────────────────────┐

  • │ UNIFORM LAYERED HAIRCUT CLINICAL SPECIFICATIONS │
  • ├─────────────────────────────────────────────────────────────────────────────┤
  • │ • Elevation: Exactly 90° straight out from every point on the head. │
  • │ • Guideline: Traveling (movable) guideline originating at the interior. │
  • │ • Partings: Vertical or radial (pie-shaped) partings. │
  • │ • Tension: Moderate, consistent tension; fingers parallel to head curve. │
  • │ • Silhouette: Round, balanced shape with zero heavy perimeter weight line. │
  • └─────────────────────────────────────────────────────────────────────────────┘
  • Step-by-Step Execution Procedure

Sectioning: Create a standard 4-section parting.

Establishing Interior Guideline:

Take a 1/2-inch vertical profile subsection along the center top of the head from the front hairline to the apex.

Lift hair straight up at 90° from the scalp and cut the section to the desired length (e.g., 3 to 4 inches).

Extend this traveling guide straight down the center back parting from apex to nape at 90°.

Cutting the Back Quadrants:

Take 1/2-inch vertical subsections in the back quadrants.

Elevate hair straight out at 90° perpendicular to the head contour.

Align fingers parallel to the curve of the scalp and cut to the traveling guide.

Cutting the Front & Sides:

Take vertical or pie-shaped radial partings in the front and side quadrants.

Elevate each subsection straight out at 90° from its origin and cut to the traveling guide.

Cross-Checking: Cross-check the entire cut horizontally across the head to confirm uniformity and balance.

5. The Long-Layered Haircut (180° Elevation / Increased Layering)

The Long-Layered Cut (also known as a 180° cut or shag) preserves maximum length and density at the perimeter while creating shorter, active layers throughout the top, crown, and interior. ┌─────────────────────────────────────────────────────────────────────────────┐

  • │ LONG-LAYERED HAIRCUT CLINICAL SPECIFICATIONS │
  • ├─────────────────────────────────────────────────────────────────────────────┤
  • │ • Elevation: 180° elevation (elevated straight up toward apex / ceiling). │
  • │ • Guideline: Stationary guideline established at the apex or top center. │
  • │ • Partings: Horizontal or vertical sections overdirected to top guide. │
  • │ • Tension: Moderate, smooth tension from roots to ends. │
  • │ • Silhouette: Retains solid perimeter length while maximizing top volume. │
  • └─────────────────────────────────────────────────────────────────────────────┘
  • Step-by-Step Execution Procedure

Sectioning: Establish a standard 4-section parting.

Establishing Perimeter Guideline: Cut the perimeter length at 0° elevation to establish baseline perimeter length (e.g., mid-back or shoulder length).

Establishing the Top Stationary Guideline:

Part a 1/2-inch circle or rectangular section at the apex.

Lift the hair straight up at 180° (perpendicular to the ceiling) and cut to the desired shortest layer length (e.g., 5 to 6 inches). This becomes the stationary top guideline .

Overdirecting All Sections Upward:

Take horizontal or vertical subsections starting from the crown down to the nape.

Comb all hair straight up and overdirect it directly into the stationary apex guideline.

Cut matching the stationary guide. Because the bottom hair must travel a much greater physical distance to reach the apex, it automatically remains significantly longer.

Blending Sides & Face Framing: Elevate side and front panels straight up to the apex guide or connect with a diagonal slide cut down the front perimeter to frame the face.

Loading diagram... Comparison of the Four Basic Haircuts