Study guide
8.1 Fundamentals of Design: Reference Points, Lines and Sections
New York Cosmetology Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: New York Licensing Law & Professional Requirements
1.1 GBL Article 27, Scope of Practice & Who Must Be Licensed 1.2 Qualifying for Licensure: Age, 1,000 Hours, Health Certificate & the Temporary Licence 1.3 The Written and Practical Examinations: Format, Fees, Admittance & Results 1.4 Licence Term, Renewal, Lapse, Fees & Out-of-State Applicants 1.5 State and Federal Payroll and New York Sales Tax Requirements 1.6 Professional Ethics, Conduct & the Domestic Violence and Sexual Assault Awareness Requirement 1.7 Career Opportunities, Placement, Professional Organizations & Trade Shows
2 Chapter 2: Safety and Health — New York Salon Regulation
2.1 Salon Facilities, Plumbing and Nail-Salon Ventilation Standards 2.2 Business Licensing, Bonds, Mandatory Postings, Inspections and Penalties 2.3 OSHA Hazard Communication, Safety Data Sheets, Chemical Storage & Labelling 2.4 Hygienic Practices, Sanitary Dress, Towels and Linens
3 Chapter 3: Infection Control
3.1 Types, Classification, Growth and Reproduction of Infectious Organisms 3.2 Viruses, Fungi, Parasites and Modes of Transmission 3.3 Immunity and Body Defenses 3.4 Decontamination Levels, Physical and Chemical Agents 3.5 New York Implement Reprocessing and Prohibited Items (§§ 160.17, 160.18) 3.6 Blood, Body Fluids and Client Contact Procedures (§ 160.19)
4 Chapter 4: Anatomy, Physiology & Nutrition
4.1 Cells, Tissues, Organs and the Body Systems 4.2 Bones of the Head, Face, Neck, Arms, Hands, Legs and Feet 4.3 Muscles of the Head, Face, Neck, Arms and Legs 4.4 The Circulatory System and Blood Supply of the Head, Face and Neck 4.5 The Nervous System and the Cranial Nerves 4.6 Basic Principles of Nutrition
5 Chapter 5: Chemistry as Applied to Cosmetology
5.1 Matter, Elements, Compounds, Mixtures and Chemical Reactions 5.2 Solutions, Suspensions, Emulsions and Oxidation-Reduction Reactions 5.3 The pH Scale and FDA Law Governing Hair Care Products
6 Chapter 6: Hair Analysis, Scalp and Hair Disorders
6.1 Hair Structure: Root, Shaft and the Three Layers 6.2 Chemical Composition, Side Bonds and Hair Pigment 6.3 Growth Cycles, Growth Patterns and Wave Patterns 6.4 Hair Analysis: Texture and Density 6.5 Porosity, Elasticity and Other Diagnostic Factors 6.6 Dandruff, Alopecia and Hair Shaft Disorders 6.7 Fungal Infections, Infestations and Bacterial Infections
7 Chapter 7: Shampoos, Rinses, Conditioners & Treatments
7.1 Client Preparation, Draping, Analysis and Consultation 7.2 Hair Analysis Instruments and Equipment 7.3 Shampoo, Rinse and Conditioner Products, Composition and Procedures 7.4 The Scalp, Manipulations and Treatments for Hair and Scalp Disorders
8 Chapter 8: Hair Cutting and Shaping
8.1 Fundamentals of Design: Reference Points, Lines and Sections 8.2 Elevation, Guidelines and Overdirection 8.3 Scissor Haircutting: Nomenclature, Care of Shears and Grip 8.4 Razor Haircutting, Clippers, Combs and Ergonomics 8.5 Scissor Techniques: Blunt, Graduated, Uniform and Long-Layered Cuts 8.6 Texturising, Clipper Cutting and Cross-Checking 8.7 Contemporary and Specialised Haircutting: Female, Male and Children's Styles 8.8 Shaving, Mustache and Beard Shaping
9 Chapter 9: Hair Styling
9.1 Wet Styling Science, Finger Waving and Skip Waving 9.2 Pin Curling 9.3 Roller Styling and Patterns in Hairstyling 9.4 Finishing Techniques 9.5 Tools, Implements and Blow-Dry Styling 9.6 Thermal Curling and Flat Ironing 9.7 Hair Pressing 9.8 Twisting, Wrapping, Weaving, Extending, Locking and Braiding 9.9 Hair Pieces, Wigs and Extensions
10 Chapter 10: Chemical Restructuring
10.1 The Chemistry of Chemical Restructuring 10.2 Chemical Restructuring Products and Processing Dynamics 10.3 Client Consultation and Preliminary Procedures for Chemical Services 10.4 Permanent Waving: Rods, Wrapping Techniques and Procedures 10.5 Chemical Relaxers: Products and Application 10.6 Curl Re-formation and Corrective Chemical Restructuring
11 Chapter 11: Hair Coloring and Lightening
11.1 Colour Theory and the Law of Colour 11.2 Tone, Intensity, the Level System and Underlying Pigment 11.3 Classifications of Haircolour: Temporary Through Permanent 11.4 Developer Chemistry, Vegetable Dyes and Metallic Salts 11.5 Client Consultation and Preliminary Procedures for Colour 11.6 Hair Lightening, Decolorisation and Toning 11.7 Special Effects: Foiling, Balayage and Dimensional Placement 11.8 Corrective Colour Procedures
12 Chapter 12: Nail Care and Procedures
12.1 Nail Structure, Growth, and Nail Shape and Colour Analysis 12.2 Nail Disorders and Diseases 12.3 Manicuring, Pedicuring and Manipulations of the Hand, Arm, Leg and Foot 12.4 Foot Spa Sanitation and New York's Prohibited Implements 12.5 Nail Tips, Wraps, Liquid and Powder Extensions and Gels
13 Chapter 13: Skin Care and Procedures
13.1 Structure and Function of the Skin 13.2 Skin Conditions and Disorders 13.3 Facial Procedures, Skin Analysis, Exfoliation and Enhancement Products 13.4 Temporary Methods of Hair Removal 13.5 Make-Up Application, Eyebrow Contouring and Lash Services
14 Chapter 14: The New York Practical Examination
14.1 Practical Exam Format, Scheduling, Admittance and Results 14.2 Work Area Setup, Mannequin Preparation and the Haircutting Procedure 14.3 Blow-Dry, Thermal Curling, Roller Placement, Perm Panel, Pin Curl Wave and Finger Wave 14.4 Chemical Service Simulations: Foiling, Haircolour Retouch and Relaxer
8.1 Fundamentals of Design: Reference Points, Lines and Sections
Key Takeaways Explain This Topic AI
The parietal ridge is the widest area of the head, where the head begins to curve inward toward the crown.
The occipital bone protrudes at the base of the skull and marks the point where the head curves away below the crown.
The three geometric cutting lines are horizontal, vertical and diagonal.
Horizontal lines build weight, vertical lines remove weight, and diagonal lines create either a diagonal-back blending or a diagonal-forward length increase.
Sections are the large divisions of the head; subsections are the smaller partings within a section that are actually cut.
Last updated: August 2026
Fundamentals of Design: Reference Points, Lines and Sections
Exam Focus: Everything in Chapter 8 depends on this vocabulary. Learn the parietal ridge, occipital bone, apex, four corners, nape and hairline by touch as well as by name, and learn what each of the three cutting lines does to weight. The practical examination assumes you can find the occipital bone and section the head cleanly without being told how.
1. Cranial Anatomy & Anatomical Reference Points
Every haircut is built upon the natural contours of the client's skull. Because human heads are curved rather than flat, hair behaves differently depending on where it originates on the cranium. Reference points are specific anatomical landmarks on the head that mark where the surface changes shape or direction, such as flat areas curving into round contours.
Understanding reference points allows the cosmetologist to:
Find balance and symmetry between the left and right sides of the head.
Recreate haircuts consistently across different client head shapes.
- Determine where to change cutting techniques, elevation angles, or guidelines. [ APEX ]
- (Highest Point)
- ▲
- Front / \ Back
- ┌─────────┐ / \ ┌─────────┐
- │ PARIETAL│ <──── ────> │ CROWN │
- │ RIDGE │ │ AREA │
- └─────────┘ └─────────┘
- ▲ │
- │ ▼
- [FOUR CORNERS] [OCCIPITAL BONE]
- (Change in Head Shape) (Protruding Base)
- │
- ▼
- [ NAPE ]
- (Below Occipital)
- Detailed Breakdown of Reference Points
Reference Point Anatomical Definition How to Locate On Client Clinical & Design Significance
Parietal Ridge (Crest) The widest area of the head, starting at the temples and ending at the bottom of the crown. Also known as the crest area or hatband line. Place a flat comb vertically against the side of the head; where the head begins to curve away from the comb is the parietal ridge. Separates the top of the head from the sides and back; serves as the transition line between layering and graduation or weight lines.
Occipital Bone The bone that protrudes prominently at the base of the skull in the center-back of the head. Feel the base of the skull with your fingers, or place a comb flat against the nape—the point where the comb leaves the head indicates the occipital bone. Marks the dividing boundary between the occipital area (mid-back) and the nape; critical anchor for graduated bobs and weight placement.
Apex The highest point on the top of the head. Lay a comb flat across the top of the head; the comb will balance precisely on the highest point (apex). Used as the starting reference for establishing interior guidelines, long layering (180°), and radial partings.
Four Corners Two front and two back points where the head transitions from flat sides to curved front and back. Place two flat combs against the head—one on the side and one on the back; the point where they intersect forms the back corner. Alternatively, cross two diagonal lines over the apex. Dictates where front fringe/bangs end and side hair begins; controls hair distribution and perimeter weight lines around the face.
Crown Area The area situated between the apex and the back of the parietal ridge. Located directly behind the apex on the upper slope of the back of the cranium. Extremely prone to growth patterns (cowlicks, whorls, irregular directions); requires lighter tension when cutting to prevent short hair from popping up.
Nape Area The lower section of the back of the head, located directly below the occipital bone down to the lower hairline. Identified by placing a comb flat horizontally against the lowest point of the back hairline below the occipital bone. Foundation for perimeter perimeter weight lines, clipper fades, and foundational base guidelines in blunt and graduated cuts.
Fringe / Bang Area The triangular section that begins at the apex and ends at the natural front corners of the hairline. Place a comb at the apex and let it fall toward the outer corners of the eyes; hair falling forward forms the fringe triangle. Frames the face; cut with light tension to accommodate natural facial features, cowlicks, and forehead contours.
2. Lines, Sections, and Cutting Angles
A haircut is composed of a series of lines connected at angles. Every haircut geometry is determined by three fundamental types of lines:
The Three Geometric Cutting Lines
Horizontal Lines:
Run parallel to the floor (horizon) from side to side.
Visual Result: Direct the eye from side to side; build maximum weight, density, and width.
Application: Used in one-length blunt cuts, baseline perimeters, and to establish low-elevation weight lines.
Vertical Lines:
Run straight up and down, perpendicular to the floor.
Visual Result: Direct the eye up and down; remove weight, create graduated or layered silhouettes, and create higher elevation.
Application: Essential for uniform layers, vertical graduation, and interior texturizing.
Diagonal Lines:
Slanted lines positioned between horizontal and vertical.
Visual Result: Create movement, blend different lengths, and produce beveling (rounding of ends under or out).
Types:
Diagonal Forward: Slants forward toward the face (shorter in the back, longer toward the front), as seen in classic A-line bobs.
Diagonal Back: Slants backward away from the face (shorter in the front, longer toward the back), directing hair away from the facial frame.
Sections vs. Subsections
Section: A larger, uniform working area of hair created by parting the hair prior to cutting (e.g., standard 4-section or 5-section parting).
Subsection (Parting): A smaller parting taken within a larger section, typically 1/4 inch to 1/2 inch thick . Subsections must be thin enough that the cosmetologist can clearly see the underlying guideline through the hair.