Study guide

8.4 Razor Haircutting, Clippers, Combs and Ergonomics

New York Cosmetology Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: New York Licensing Law & Professional Requirements

1.1 GBL Article 27, Scope of Practice & Who Must Be Licensed 1.2 Qualifying for Licensure: Age, 1,000 Hours, Health Certificate & the Temporary Licence 1.3 The Written and Practical Examinations: Format, Fees, Admittance & Results 1.4 Licence Term, Renewal, Lapse, Fees & Out-of-State Applicants 1.5 State and Federal Payroll and New York Sales Tax Requirements 1.6 Professional Ethics, Conduct & the Domestic Violence and Sexual Assault Awareness Requirement 1.7 Career Opportunities, Placement, Professional Organizations & Trade Shows

2 Chapter 2: Safety and Health — New York Salon Regulation

2.1 Salon Facilities, Plumbing and Nail-Salon Ventilation Standards 2.2 Business Licensing, Bonds, Mandatory Postings, Inspections and Penalties 2.3 OSHA Hazard Communication, Safety Data Sheets, Chemical Storage & Labelling 2.4 Hygienic Practices, Sanitary Dress, Towels and Linens

3 Chapter 3: Infection Control

3.1 Types, Classification, Growth and Reproduction of Infectious Organisms 3.2 Viruses, Fungi, Parasites and Modes of Transmission 3.3 Immunity and Body Defenses 3.4 Decontamination Levels, Physical and Chemical Agents 3.5 New York Implement Reprocessing and Prohibited Items (§§ 160.17, 160.18) 3.6 Blood, Body Fluids and Client Contact Procedures (§ 160.19)

4 Chapter 4: Anatomy, Physiology & Nutrition

4.1 Cells, Tissues, Organs and the Body Systems 4.2 Bones of the Head, Face, Neck, Arms, Hands, Legs and Feet 4.3 Muscles of the Head, Face, Neck, Arms and Legs 4.4 The Circulatory System and Blood Supply of the Head, Face and Neck 4.5 The Nervous System and the Cranial Nerves 4.6 Basic Principles of Nutrition

5 Chapter 5: Chemistry as Applied to Cosmetology

5.1 Matter, Elements, Compounds, Mixtures and Chemical Reactions 5.2 Solutions, Suspensions, Emulsions and Oxidation-Reduction Reactions 5.3 The pH Scale and FDA Law Governing Hair Care Products

6 Chapter 6: Hair Analysis, Scalp and Hair Disorders

6.1 Hair Structure: Root, Shaft and the Three Layers 6.2 Chemical Composition, Side Bonds and Hair Pigment 6.3 Growth Cycles, Growth Patterns and Wave Patterns 6.4 Hair Analysis: Texture and Density 6.5 Porosity, Elasticity and Other Diagnostic Factors 6.6 Dandruff, Alopecia and Hair Shaft Disorders 6.7 Fungal Infections, Infestations and Bacterial Infections

7 Chapter 7: Shampoos, Rinses, Conditioners & Treatments

7.1 Client Preparation, Draping, Analysis and Consultation 7.2 Hair Analysis Instruments and Equipment 7.3 Shampoo, Rinse and Conditioner Products, Composition and Procedures 7.4 The Scalp, Manipulations and Treatments for Hair and Scalp Disorders

8 Chapter 8: Hair Cutting and Shaping

8.1 Fundamentals of Design: Reference Points, Lines and Sections 8.2 Elevation, Guidelines and Overdirection 8.3 Scissor Haircutting: Nomenclature, Care of Shears and Grip 8.4 Razor Haircutting, Clippers, Combs and Ergonomics 8.5 Scissor Techniques: Blunt, Graduated, Uniform and Long-Layered Cuts 8.6 Texturising, Clipper Cutting and Cross-Checking 8.7 Contemporary and Specialised Haircutting: Female, Male and Children's Styles 8.8 Shaving, Mustache and Beard Shaping

9 Chapter 9: Hair Styling

9.1 Wet Styling Science, Finger Waving and Skip Waving 9.2 Pin Curling 9.3 Roller Styling and Patterns in Hairstyling 9.4 Finishing Techniques 9.5 Tools, Implements and Blow-Dry Styling 9.6 Thermal Curling and Flat Ironing 9.7 Hair Pressing 9.8 Twisting, Wrapping, Weaving, Extending, Locking and Braiding 9.9 Hair Pieces, Wigs and Extensions

10 Chapter 10: Chemical Restructuring

10.1 The Chemistry of Chemical Restructuring 10.2 Chemical Restructuring Products and Processing Dynamics 10.3 Client Consultation and Preliminary Procedures for Chemical Services 10.4 Permanent Waving: Rods, Wrapping Techniques and Procedures 10.5 Chemical Relaxers: Products and Application 10.6 Curl Re-formation and Corrective Chemical Restructuring

11 Chapter 11: Hair Coloring and Lightening

11.1 Colour Theory and the Law of Colour 11.2 Tone, Intensity, the Level System and Underlying Pigment 11.3 Classifications of Haircolour: Temporary Through Permanent 11.4 Developer Chemistry, Vegetable Dyes and Metallic Salts 11.5 Client Consultation and Preliminary Procedures for Colour 11.6 Hair Lightening, Decolorisation and Toning 11.7 Special Effects: Foiling, Balayage and Dimensional Placement 11.8 Corrective Colour Procedures

12 Chapter 12: Nail Care and Procedures

12.1 Nail Structure, Growth, and Nail Shape and Colour Analysis 12.2 Nail Disorders and Diseases 12.3 Manicuring, Pedicuring and Manipulations of the Hand, Arm, Leg and Foot 12.4 Foot Spa Sanitation and New York's Prohibited Implements 12.5 Nail Tips, Wraps, Liquid and Powder Extensions and Gels

13 Chapter 13: Skin Care and Procedures

13.1 Structure and Function of the Skin 13.2 Skin Conditions and Disorders 13.3 Facial Procedures, Skin Analysis, Exfoliation and Enhancement Products 13.4 Temporary Methods of Hair Removal 13.5 Make-Up Application, Eyebrow Contouring and Lash Services

14 Chapter 14: The New York Practical Examination

14.1 Practical Exam Format, Scheduling, Admittance and Results 14.2 Work Area Setup, Mannequin Preparation and the Haircutting Procedure 14.3 Blow-Dry, Thermal Curling, Roller Placement, Perm Panel, Pin Curl Wave and Finger Wave 14.4 Chemical Service Simulations: Foiling, Haircolour Retouch and Relaxer

8.4 Razor Haircutting, Clippers, Combs and Ergonomics

Key Takeaways Explain This Topic AI

19 NYCRR § 160.18(a)(2) provides that a razor may not be used for more than one application; disposable razors are permitted and disposed of under § 160.19(b).

A razor cuts the hair at an angle rather than straight across, producing a softer, more tapered end than shears.

Razor cutting is performed on wet hair only; cutting dry hair with a razor tears the cuticle and causes discomfort.

Clipper guard numbers correspond to standard lengths, with a #1 guard leaving roughly one eighth of an inch and each subsequent number adding about an eighth.

The New York practical examination requires the candidate to demonstrate one or two sections of the layered cut using a razor, in the examiner's direct presence.

Last updated: August 2026

Razor Haircutting, Clippers, Combs and Ergonomics

Exam Focus: The New York-specific point here outranks the technique: § 160.18(a)(2) bars a razor from being used for more than one application, so a fresh blade goes on for every client without exception. Beyond that, know why razors are used on wet hair only, the clipper guard scale, and the ergonomic practices that prevent the repetitive strain injuries that end careers.

1. Razor Cutting Safety Rules & Maintenance

Straight razors and feathering razors create soft, feathered, tapered ends that cannot be duplicated by shears. However, improper razor usage causes severe hair damage and client injury.

Universal Rules for Razor Cutting

Always Cut Wet or Damp Hair: Never use a razor on dry hair. Cutting dry hair with a razor pulls the hair follicle, causes severe pain, and tears the protective cuticle layer, causing irreversible frizz and split ends.

Always Use a Safety Guard: In New York State, razors used on clients must be fitted with a protective safety guard over the blade to prevent deep lacerations.

Replace Blades After Every Client: Dull razor blades drag and pull hair. Razor blades are single-use items: discard used razor blades immediately into an OSHA-approved puncture-proof sharps container after each client service.

Maintain Proper Blade Angle: Hold the razor blade at a 45° angle or lower relative to the hair strand. Never hold the blade flat (0°) or perpendicular (90°) against the hair shaft.

Keep Non-Dominant Hand Guarded: Never lead with your fingers in front of an exposed razor stroke.

2. Razor Haircutting in Detail

The razor is a distinct discipline, not a substitute shear. It cuts each hair at an angle rather than straight across, so the end is tapered rather than blunt. That produces softness, movement and visible texture — and removes the strong perimeter a blunt cut relies on.

The New York rules

§ 160.18(a)(2) — "A razor may not be used for more than one application. Disposable razors are permitted and shall be disposed of in accord with § 160.19(b) of this Part." A new blade goes on for every client, and the used blade goes into the sealable rigid puncture-proof container , never into the general waste.

§ 160.17(c)(2) — the razor handle and any reusable component is cleaned with warm water and soap or detergent, rinsed, dried and immersed in an EPA hospital-grade disinfectant for no less than 10 minutes before the next client.

§ 160.19 — if the razor draws blood, the full blood-exposure protocol in section 3.6 applies immediately.

Technique rules

  • Rule Reason
  • Wet hair only A razor on dry hair tears the cuticle, pulls, and hurts. Water lubricates the cut
  • Use a guard Guarded razors reduce the risk of cutting the hand and give more control over how much is removed

Cut on the underside of the section for length; on the top surface for texture Underside removal preserves the visual line; surface work creates visible movement

Shallow angle, light pressure, multiple passes Steep angles remove too much and produce a frayed end

Do not razor cut damaged or high-porosity hair The angled cut exposes more cortex and accelerates splitting on already compromised hair

  • Do not razor cut very curly hair without care The tapered end can encourage frizz rather than definition
  • 3. Ergonomics: The Career-Length Issue
  • Comb Classifications

Styling / All-Purpose Cutting Comb: Features fine teeth for maximum tension (used for blunt cutting, clean lines, and short hair) and wide teeth for detangling, softer tension, and graduated cuts. Often includes a designated "parting tooth" at the comb tip.

Wide-Tooth Comb: Features widely spaced teeth designed to detangle wet hair, gently distribute conditioner, and control natural curl patterns without disrupting curl clumps.

Tail Comb (Rat-Tail): Equipped with a long metal or plastic tail; used exclusively for sectioning, clean partings, and chemical/highlight weaving.

Clipper Comb: A broad, flat comb with flexible teeth designed for clipper-over-comb and shear-over-comb techniques.

Ergonomic Principles & Repetitive Strain Prevention

Cosmetologists are at high risk for work-related musculoskeletal disorders, particularly Carpal Tunnel Syndrome , tendonitis, and lower back strain. ┌─────────────────────────────────────────────────────────────────────────────┐

  • │ ERGONOMIC POSTURE CHECKLIST │
  • ├─────────────────────────────────────────────────────────────────────────────┤
  • │ ✓ Neutral Wrist: Keep wrists straight and flat; avoid bending sideways. │
  • │ ✓ Body Alignment: Stand directly in front of the section being cut. │
  • │ ✓ Weight Distribution: Feet shoulder-width apart, knees slightly bent. │
  • │ ✓ Chair Height: Adjust hydraulic chair so cutting area is at chest/elbow. │
  • │ ✓ Hand Relaxation: Maintain light, relaxed grip; avoid squeezing shears. │
  • └─────────────────────────────────────────────────────────────────────────────┘

Neutral Wrist Alignment: Always maintain a straight, neutral wrist position. Cutting with bent or twisted wrists compresses the median nerve within the carpal tunnel, causing numbness, tingling, and permanent nerve injury.

Stand Directly in Front of Your Work: Move your body around the client rather than reaching across or twisting your spine. Position yourself squarely in front of the subsection to ensure accurate visual alignment and symmetrical elevation.

Hydraulic Chair Adjustment: Lower or raise the styling chair so that your elbows remain bent at a comfortable 60° to 90° angle, preventing shoulder elevation and neck spasms.

Practical habits

Adjust the chair, not your back. The client's head should be at a height where your elbows stay below shoulder level.

Keep elbows low and wrists straight. Working with the elbow above the shoulder is the fastest route to rotator cuff injury; a bent wrist under repetitive load is the route to carpal tunnel syndrome.

Move your feet, not your torso. Walk around the chair rather than twisting and reaching.

Alternate tasks through the day where the schedule allows, so the same movement is not repeated for hours.

Use correctly sized, correctly tensioned shears. An oversized shear forces the thumb to over-extend; an over-tight shear multiplies the force each cut requires.

Stretch between clients — forearm flexors and extensors, shoulders, neck.

Wear closed-toe supportive shoes — required for the practical examination and sensible every day.

19 NYCRR § 160.16(b)(5) requires sufficient space or working area to ensure the safety and health of both the operator and client , which makes workstation ergonomics a regulatory matter as well as a personal one.