Study guide
8.3 Scissor Haircutting: Nomenclature, Care of Shears and Grip
New York Cosmetology Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: New York Licensing Law & Professional Requirements
1.1 GBL Article 27, Scope of Practice & Who Must Be Licensed 1.2 Qualifying for Licensure: Age, 1,000 Hours, Health Certificate & the Temporary Licence 1.3 The Written and Practical Examinations: Format, Fees, Admittance & Results 1.4 Licence Term, Renewal, Lapse, Fees & Out-of-State Applicants 1.5 State and Federal Payroll and New York Sales Tax Requirements 1.6 Professional Ethics, Conduct & the Domestic Violence and Sexual Assault Awareness Requirement 1.7 Career Opportunities, Placement, Professional Organizations & Trade Shows
2 Chapter 2: Safety and Health — New York Salon Regulation
2.1 Salon Facilities, Plumbing and Nail-Salon Ventilation Standards 2.2 Business Licensing, Bonds, Mandatory Postings, Inspections and Penalties 2.3 OSHA Hazard Communication, Safety Data Sheets, Chemical Storage & Labelling 2.4 Hygienic Practices, Sanitary Dress, Towels and Linens
3 Chapter 3: Infection Control
3.1 Types, Classification, Growth and Reproduction of Infectious Organisms 3.2 Viruses, Fungi, Parasites and Modes of Transmission 3.3 Immunity and Body Defenses 3.4 Decontamination Levels, Physical and Chemical Agents 3.5 New York Implement Reprocessing and Prohibited Items (§§ 160.17, 160.18) 3.6 Blood, Body Fluids and Client Contact Procedures (§ 160.19)
4 Chapter 4: Anatomy, Physiology & Nutrition
4.1 Cells, Tissues, Organs and the Body Systems 4.2 Bones of the Head, Face, Neck, Arms, Hands, Legs and Feet 4.3 Muscles of the Head, Face, Neck, Arms and Legs 4.4 The Circulatory System and Blood Supply of the Head, Face and Neck 4.5 The Nervous System and the Cranial Nerves 4.6 Basic Principles of Nutrition
5 Chapter 5: Chemistry as Applied to Cosmetology
5.1 Matter, Elements, Compounds, Mixtures and Chemical Reactions 5.2 Solutions, Suspensions, Emulsions and Oxidation-Reduction Reactions 5.3 The pH Scale and FDA Law Governing Hair Care Products
6 Chapter 6: Hair Analysis, Scalp and Hair Disorders
6.1 Hair Structure: Root, Shaft and the Three Layers 6.2 Chemical Composition, Side Bonds and Hair Pigment 6.3 Growth Cycles, Growth Patterns and Wave Patterns 6.4 Hair Analysis: Texture and Density 6.5 Porosity, Elasticity and Other Diagnostic Factors 6.6 Dandruff, Alopecia and Hair Shaft Disorders 6.7 Fungal Infections, Infestations and Bacterial Infections
7 Chapter 7: Shampoos, Rinses, Conditioners & Treatments
7.1 Client Preparation, Draping, Analysis and Consultation 7.2 Hair Analysis Instruments and Equipment 7.3 Shampoo, Rinse and Conditioner Products, Composition and Procedures 7.4 The Scalp, Manipulations and Treatments for Hair and Scalp Disorders
8 Chapter 8: Hair Cutting and Shaping
8.1 Fundamentals of Design: Reference Points, Lines and Sections 8.2 Elevation, Guidelines and Overdirection 8.3 Scissor Haircutting: Nomenclature, Care of Shears and Grip 8.4 Razor Haircutting, Clippers, Combs and Ergonomics 8.5 Scissor Techniques: Blunt, Graduated, Uniform and Long-Layered Cuts 8.6 Texturising, Clipper Cutting and Cross-Checking 8.7 Contemporary and Specialised Haircutting: Female, Male and Children's Styles 8.8 Shaving, Mustache and Beard Shaping
9 Chapter 9: Hair Styling
9.1 Wet Styling Science, Finger Waving and Skip Waving 9.2 Pin Curling 9.3 Roller Styling and Patterns in Hairstyling 9.4 Finishing Techniques 9.5 Tools, Implements and Blow-Dry Styling 9.6 Thermal Curling and Flat Ironing 9.7 Hair Pressing 9.8 Twisting, Wrapping, Weaving, Extending, Locking and Braiding 9.9 Hair Pieces, Wigs and Extensions
10 Chapter 10: Chemical Restructuring
10.1 The Chemistry of Chemical Restructuring 10.2 Chemical Restructuring Products and Processing Dynamics 10.3 Client Consultation and Preliminary Procedures for Chemical Services 10.4 Permanent Waving: Rods, Wrapping Techniques and Procedures 10.5 Chemical Relaxers: Products and Application 10.6 Curl Re-formation and Corrective Chemical Restructuring
11 Chapter 11: Hair Coloring and Lightening
11.1 Colour Theory and the Law of Colour 11.2 Tone, Intensity, the Level System and Underlying Pigment 11.3 Classifications of Haircolour: Temporary Through Permanent 11.4 Developer Chemistry, Vegetable Dyes and Metallic Salts 11.5 Client Consultation and Preliminary Procedures for Colour 11.6 Hair Lightening, Decolorisation and Toning 11.7 Special Effects: Foiling, Balayage and Dimensional Placement 11.8 Corrective Colour Procedures
12 Chapter 12: Nail Care and Procedures
12.1 Nail Structure, Growth, and Nail Shape and Colour Analysis 12.2 Nail Disorders and Diseases 12.3 Manicuring, Pedicuring and Manipulations of the Hand, Arm, Leg and Foot 12.4 Foot Spa Sanitation and New York's Prohibited Implements 12.5 Nail Tips, Wraps, Liquid and Powder Extensions and Gels
13 Chapter 13: Skin Care and Procedures
13.1 Structure and Function of the Skin 13.2 Skin Conditions and Disorders 13.3 Facial Procedures, Skin Analysis, Exfoliation and Enhancement Products 13.4 Temporary Methods of Hair Removal 13.5 Make-Up Application, Eyebrow Contouring and Lash Services
14 Chapter 14: The New York Practical Examination
14.1 Practical Exam Format, Scheduling, Admittance and Results 14.2 Work Area Setup, Mannequin Preparation and the Haircutting Procedure 14.3 Blow-Dry, Thermal Curling, Roller Placement, Perm Panel, Pin Curl Wave and Finger Wave 14.4 Chemical Service Simulations: Foiling, Haircolour Retouch and Relaxer
8.3 Scissor Haircutting: Nomenclature, Care of Shears and Grip
Key Takeaways Explain This Topic AI
Forged shears are made from a single piece of steel and hold an edge longer than cast shears, which are poured into a mould.
The Rockwell hardness scale measures steel hardness; professional haircutting shears typically fall in the mid-50s to low-60s HRC.
The thumb moves the still blade; the fingers and the hand remain still while the thumb does the cutting motion.
Palming the shears means closing them and rotating them into the palm while combing, so the points face away from the client.
Texturising or thinning shears are classified by teeth count, which determines how much hair is removed per closure.
Last updated: August 2026
Scissor Haircutting: Nomenclature, Care of Shears and Grip
Exam Focus: Palming is graded on the practical examination and is a standing safety rule. On the written examination, expect items on forged versus cast construction, the Rockwell range, which digit moves which blade, and texturising shear teeth counts. Care of the shear — cleaning, oiling, tension, and never cutting anything but hair with it — is part of the same official bullet.
1. Professional Haircutting Shears: Metallurgy & Construction
Professional haircutting shears are precision surgical instruments. High-quality shears ensure clean, crisp cuts that preserve the hair cuticle, whereas dull or inferior shears crush and tear hair ends, leading to premature split ends (trichoptilosis).
Cast Steel vs. Forged Steel Shears
Manufacturing Method Manufacturing Process Material Characteristics Durability & Edge Retention Relative Cost
Cast Steel Shears Molten liquid steel is poured into a mold and allowed to cool. Metal can develop microscopic air bubbles (porosity); more brittle structural integrity. Prone to dulling faster; can chip, crack, or shatter if dropped on hard salon flooring; difficult to resharpen repeatedly. Lower / Budget-friendly
Forged Steel Shears A solid bar of high-grade steel is heated to intense temperatures and hammered/compressed under tons of hydraulic pressure. Metal molecules are compressed into an ultra-dense, non-porous crystalline structure. Exceptional durability; holds a razor-sharp convex edge for extended periods; can be precision-resharpened many times. Higher / Professional investment
The Rockwell Hardness Scale (HRC)
The hardness of shear steel is measured using the Rockwell Hardness Scale (HRC) :
Optimal Hardness Range: 56 to 63 HRC is the industry standard for professional haircutting shears.
Below 56 HRC: The steel is too soft and will lose its cutting edge quickly under continuous daily salon use.
Above 63 HRC: The steel becomes overly hard and brittle; it is prone to chipping, cracking, or breaking upon minor impact. ROCKWELL HARDNESS SCALE (HRC) FOR SHEARS
- ◄───────────────────────────┬───────────────────────────►
- Under 56 HRC 56 – 63 HRC Above 63 HRC
- [ Too Soft ] [ OPTIMAL BALANCE ] [ Too Brittle ]
- Dulls rapidly - Superior edge retention - Prone to chipping
- Requires frequent - High structural durability - Can shatter if
- resharpening - Resharpens smoothly dropped
- 2. Anatomy of Haircutting Shears & Proper Grip Mechanics
Understanding the exact mechanical parts of shears ensures proper handling, adjustment, and tension maintenance.
Primary Components of Shears
Still (Stationary) Blade: The blade connected to the finger grip ring and finger tang. This blade remains completely stationary during cutting to provide a stable cutting plane.
Moving Blade: The blade attached to the thumb ring. The thumb is the only digit that moves up and down during cutting.
Pivot Screw / Tension Dial: The central screw connecting the two blades. Proper tension is critical: if too loose, shears will fold hair; if too tight, blades bind and cause excessive hand strain and premature blade wear.
Finger Tang (Finger Rest): The curved metal extension on the still blade ring that supports the pinky finger, providing stability, leverage, and muscle fatigue reduction.
Thumb Hole & Finger Ring: The circular openings for the thumb and ring finger.
Bumper / Silencer: A small rubber or plastic insert that absorbs shock and eliminates clicking sounds when blades close. STILL BLADE ────────────────────────────┐
- │
- PIVOT SCREW / TENSION │ BLADE TIPS
- ▼ ▼ ▼
- ┌─────────────●────────────────────────────┐
- │ │
- └─────────────┬────────────────────────────┘
- ▲
- │
- MOVING BLADE ──────┘
- (Operated by Thumb Only)
- FINGER REST (TANG) ──► ⌒
- FINGER HOLE (Ring Finger) ──► ( O ) ( O ) ◄── THUMB HOLE (Tip of Thumb Only)
- Proper Hand Position & Cutting Mechanics
Insert the ring finger into the finger ring of the still blade (resting between the first and second knuckle), with the pinky resting on the finger tang .
Rest the index and middle fingers along the shank of the still blade for maximum guidance and control.
Insert only the cushion/tip of the thumb into the thumb ring of the moving blade.
Critical Rule: Only the thumb moves. The four fingers and still blade remain steady. Moving both blades creates uneven lines and excessive muscular strain.
3. The Palming Technique & Tool Transfer
Palming the shears is an indispensable safety and efficiency skill required on both state board practical examinations and in daily salon practice. ┌─────────────────────────────────────────────────────────────────────────────┐
- │ PROCEDURE: PALMING SHEARS SAFELY │
- ├─────────────────────────────────────────────────────────────────────────────┤
- │ 1. Slip the thumb completely out of the thumb ring. │
- │ 2. Curl the ring, middle, index fingers, and thumb inward to wrap │
- │ the closed shears securely against the palm of your dominant hand. │
- │ 3. Hold the cutting comb between the thumb and index finger of the │
- │ same hand to comb and section the hair. │
- │ 4. Once subsection is parted and secured in non-dominant fingers, │
- │ transfer comb to non-dominant hand and re-insert thumb to cut. │
- └─────────────────────────────────────────────────────────────────────────────┘
- Why Palming Is Mandatory
Client Protection: Holding shears open while combing poses an extreme hazard of accidentally cutting the client's ear, neck, face, or scalp.
Stylist Safety: Prevents the stylist from cutting their own fingers while parting hair.
Time Efficiency: Eliminates the need to put shears down on the workstation between every parted subsection.
4. Texturizing Shears & Teeth Spacing Classifications
Texturizing shears (also called thinning, tapering, or blending shears) feature one straight cutting blade and one notched blade with serrated teeth. The amount of hair removed per cut is directly dictated by the number and spacing of teeth .
Tool Type Number of Teeth Teeth Spacing Amount of Hair Removed Clinical Purpose
Thinning / Blending Shears 26 to 40 teeth Fine, closely spaced teeth Removes subtle amounts of bulk (approx. 10%–25%); leaves no visible lines. Blending transitions, softening hard perimeter lines, removing weight in fine/medium hair.
Notching Shears 14 to 25 teeth Medium spacing between teeth Removes moderate bulk (approx. 25%–40%); creates noticeable texture. Adding chunky texture, visual separation, and movement in thick hair.
Chunking / Wide-Tooth Shears 5 to 13 teeth Widely spaced, deep notches Removes large sections of hair (approx. 40%–60%); highly dramatic effect. Aggressive weight removal in extremely dense or coarse hair; bold, distressed effects.
5. Care of Shears
The official bullet is "nomenclature and care of scissors", and care is examinable in its own right.
Practice Why
Cut only hair Cutting paper, foil, fabric or extension wefts with cutting shears destroys the edge. Keep a separate pair for foils and wefts
Wipe after every client Hair, product and moisture corrode the edge and the pivot
Clean, then disinfect between clients § 160.17(c)(2): clean with warm water and soap or detergent, rinse, dry, immerse in EPA hospital-grade disinfectant per manufacturer directions and no less than 10 minutes, rinse, dry, store covered
- Dry thoroughly before storing Disinfectant left on steel pits the blade
- Oil the pivot A drop at the pivot with the shear open, then work it closed and open, and wipe the excess
Check tension regularly Hold the shear vertically, open one blade to 90° and release: it should fall about a third of the way and stop. Too loose folds and pushes hair; too tight fatigues the hand and damages the edge
Store in a case or covered container § 160.20(f) requires sharp or pointed equipment to be stored so as not to be accessible to consumers
Have them professionally sharpened Never on a domestic sharpener; the convex edge of a professional shear needs specialist equipment
Handing shears to another person
Never pass shears points-first or open. Close them, hold them by the blades with the points toward yourself, and offer the handles. On the practical examination, poor implement handling is a safety observation across the whole exam, not a single deduction.