Study guide

8.8 Shaving, Mustache and Beard Shaping

New York Cosmetology Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: New York Licensing Law & Professional Requirements

1.1 GBL Article 27, Scope of Practice & Who Must Be Licensed 1.2 Qualifying for Licensure: Age, 1,000 Hours, Health Certificate & the Temporary Licence 1.3 The Written and Practical Examinations: Format, Fees, Admittance & Results 1.4 Licence Term, Renewal, Lapse, Fees & Out-of-State Applicants 1.5 State and Federal Payroll and New York Sales Tax Requirements 1.6 Professional Ethics, Conduct & the Domestic Violence and Sexual Assault Awareness Requirement 1.7 Career Opportunities, Placement, Professional Organizations & Trade Shows

2 Chapter 2: Safety and Health — New York Salon Regulation

2.1 Salon Facilities, Plumbing and Nail-Salon Ventilation Standards 2.2 Business Licensing, Bonds, Mandatory Postings, Inspections and Penalties 2.3 OSHA Hazard Communication, Safety Data Sheets, Chemical Storage & Labelling 2.4 Hygienic Practices, Sanitary Dress, Towels and Linens

3 Chapter 3: Infection Control

3.1 Types, Classification, Growth and Reproduction of Infectious Organisms 3.2 Viruses, Fungi, Parasites and Modes of Transmission 3.3 Immunity and Body Defenses 3.4 Decontamination Levels, Physical and Chemical Agents 3.5 New York Implement Reprocessing and Prohibited Items (§§ 160.17, 160.18) 3.6 Blood, Body Fluids and Client Contact Procedures (§ 160.19)

4 Chapter 4: Anatomy, Physiology & Nutrition

4.1 Cells, Tissues, Organs and the Body Systems 4.2 Bones of the Head, Face, Neck, Arms, Hands, Legs and Feet 4.3 Muscles of the Head, Face, Neck, Arms and Legs 4.4 The Circulatory System and Blood Supply of the Head, Face and Neck 4.5 The Nervous System and the Cranial Nerves 4.6 Basic Principles of Nutrition

5 Chapter 5: Chemistry as Applied to Cosmetology

5.1 Matter, Elements, Compounds, Mixtures and Chemical Reactions 5.2 Solutions, Suspensions, Emulsions and Oxidation-Reduction Reactions 5.3 The pH Scale and FDA Law Governing Hair Care Products

6 Chapter 6: Hair Analysis, Scalp and Hair Disorders

6.1 Hair Structure: Root, Shaft and the Three Layers 6.2 Chemical Composition, Side Bonds and Hair Pigment 6.3 Growth Cycles, Growth Patterns and Wave Patterns 6.4 Hair Analysis: Texture and Density 6.5 Porosity, Elasticity and Other Diagnostic Factors 6.6 Dandruff, Alopecia and Hair Shaft Disorders 6.7 Fungal Infections, Infestations and Bacterial Infections

7 Chapter 7: Shampoos, Rinses, Conditioners & Treatments

7.1 Client Preparation, Draping, Analysis and Consultation 7.2 Hair Analysis Instruments and Equipment 7.3 Shampoo, Rinse and Conditioner Products, Composition and Procedures 7.4 The Scalp, Manipulations and Treatments for Hair and Scalp Disorders

8 Chapter 8: Hair Cutting and Shaping

8.1 Fundamentals of Design: Reference Points, Lines and Sections 8.2 Elevation, Guidelines and Overdirection 8.3 Scissor Haircutting: Nomenclature, Care of Shears and Grip 8.4 Razor Haircutting, Clippers, Combs and Ergonomics 8.5 Scissor Techniques: Blunt, Graduated, Uniform and Long-Layered Cuts 8.6 Texturising, Clipper Cutting and Cross-Checking 8.7 Contemporary and Specialised Haircutting: Female, Male and Children's Styles 8.8 Shaving, Mustache and Beard Shaping

9 Chapter 9: Hair Styling

9.1 Wet Styling Science, Finger Waving and Skip Waving 9.2 Pin Curling 9.3 Roller Styling and Patterns in Hairstyling 9.4 Finishing Techniques 9.5 Tools, Implements and Blow-Dry Styling 9.6 Thermal Curling and Flat Ironing 9.7 Hair Pressing 9.8 Twisting, Wrapping, Weaving, Extending, Locking and Braiding 9.9 Hair Pieces, Wigs and Extensions

10 Chapter 10: Chemical Restructuring

10.1 The Chemistry of Chemical Restructuring 10.2 Chemical Restructuring Products and Processing Dynamics 10.3 Client Consultation and Preliminary Procedures for Chemical Services 10.4 Permanent Waving: Rods, Wrapping Techniques and Procedures 10.5 Chemical Relaxers: Products and Application 10.6 Curl Re-formation and Corrective Chemical Restructuring

11 Chapter 11: Hair Coloring and Lightening

11.1 Colour Theory and the Law of Colour 11.2 Tone, Intensity, the Level System and Underlying Pigment 11.3 Classifications of Haircolour: Temporary Through Permanent 11.4 Developer Chemistry, Vegetable Dyes and Metallic Salts 11.5 Client Consultation and Preliminary Procedures for Colour 11.6 Hair Lightening, Decolorisation and Toning 11.7 Special Effects: Foiling, Balayage and Dimensional Placement 11.8 Corrective Colour Procedures

12 Chapter 12: Nail Care and Procedures

12.1 Nail Structure, Growth, and Nail Shape and Colour Analysis 12.2 Nail Disorders and Diseases 12.3 Manicuring, Pedicuring and Manipulations of the Hand, Arm, Leg and Foot 12.4 Foot Spa Sanitation and New York's Prohibited Implements 12.5 Nail Tips, Wraps, Liquid and Powder Extensions and Gels

13 Chapter 13: Skin Care and Procedures

13.1 Structure and Function of the Skin 13.2 Skin Conditions and Disorders 13.3 Facial Procedures, Skin Analysis, Exfoliation and Enhancement Products 13.4 Temporary Methods of Hair Removal 13.5 Make-Up Application, Eyebrow Contouring and Lash Services

14 Chapter 14: The New York Practical Examination

14.1 Practical Exam Format, Scheduling, Admittance and Results 14.2 Work Area Setup, Mannequin Preparation and the Haircutting Procedure 14.3 Blow-Dry, Thermal Curling, Roller Placement, Perm Panel, Pin Curl Wave and Finger Wave 14.4 Chemical Service Simulations: Foiling, Haircolour Retouch and Relaxer

8.8 Shaving, Mustache and Beard Shaping

Key Takeaways Explain This Topic AI

19 NYCRR § 160.18(a)(2) permits a razor for only one application, so shaving uses a fresh disposable blade for every client.

Common shaving mugs are prohibited under § 160.18(a)(8); sanitary paper or plastic inner cups are used for each client and destroyed after use.

Styptic pencils are strictly prohibited under §§ 160.18(a)(10) and 160.19(d); bleeding is controlled with liquid or powder haemostatic products.

Preparation softens the beard with heat and moisture before lather is applied, so the hair cuts with less pressure.

Shaving with the grain removes less hair with less irritation; shaving against the grain gives a closer result and more risk of ingrown hairs and razor burn.

Last updated: August 2026

Shaving, Mustache and Beard Shaping

Exam Focus: Every New York rule that bites hardest lives in this section: one application per razor, no common shaving mugs, no styptic pencils, mandatory sharps disposal and the full blood-exposure protocol if the skin is broken. Learn the preparation sequence and the with-the-grain versus against-the-grain trade-off, and remember the Article 28 shop-licence boundary from section 8.7.

1. The New York Rules First

Shaving is the cosmetology service most likely to break skin, so the regulations govern it tightly.

Rule Requirement Authority

One application per razor A razor may not be used for more than one application; disposable razors permitted and disposed of as sharps § 160.18(a)(2)

Sharps disposal Used blades go into a sealable rigid puncture-proof container , never general waste § 160.19(b)

No common shaving mugs Shaving mugs in common are prohibited; sanitary paper or plastic inner cups are used for each client and destroyed after each use § 160.18(a)(8)

No styptic pencils Strictly prohibited. Bleeding is controlled with a liquid or powder haemostatic, or with material disposed of immediately in a rigid container §§ 160.18(a)(10), 160.19(d)

Reusable handle reprocessed Clean with warm water and soap or detergent, rinse, dry, immerse in EPA hospital-grade disinfectant no less than 10 minutes, rinse, dry, store covered § 160.17(c)(2)

Gloves Required whenever contact with blood can reasonably be anticipated §§ 160.19, 160.20(i)

Barbering boundary The shop needs an Article 28 barber shop licence before barbering is practised there § 160.15(a)

No shaving over broken or inflamed skin Folliculitis, active acne lesions, moles, warts and skin tags are worked around or the service declined Professional standard; § 160.27(c) bars treatment

2. Preparation

The purpose of preparation is to soften the beard so the blade cuts hair rather than dragging on it. Hair absorbs water and softens considerably; a properly prepared beard needs far less pressure to cut, which is where irritation comes from.

Consult and inspect the skin. Look for lesions, inflamed follicles, ingrown hairs, moles and skin tags, and note the grain — the direction of beard growth, which varies across the face and neck.

Drape — neck strip, then cape, then a towel across the chest.

Recline the client and position the chair so your elbows stay low.

Apply a hot towel across the beard area, avoiding the nostrils, and leave it until it cools. Test the temperature on your own wrist first.

Apply pre-shave oil or cream if used, and massage it in.

Apply lather with a brush or by hand, working it into the beard in circular motions to lift the hair and hold moisture against it. Lather is a moisture carrier, not merely a lubricant.

Let the lather sit briefly so the beard continues to soften.

3. Dexterity of the Hands and Razor

The official bullet names dexterity specifically, because razor control is the whole skill.

Hold the razor with a stable, relaxed grip. Tension in the hand transfers to the blade.

The free hand stretches the skin. Taut skin presents the hair upright and prevents the blade catching a fold. This is the single most important safety technique in shaving.

Blade angle around 30 degrees to the skin. Too flat and the blade skips; too steep and it scrapes.

Short, controlled strokes , resetting the free hand as you move across the face.

Let the blade do the work. Pressure does not shave closer; it removes skin.

Work in a systematic order so no area is missed and the lather does not dry.

Reduce pressure over bony prominences — the jawline, the chin, the mandible angle — and over the mobile skin of the neck.

Grain direction

  • Direction Result Risk
  • With the grain Comfortable, less irritation Less close
  • Across the grain Closer than with the grain Moderate

Against the grain Closest Highest — razor burn, razor bumps and ingrown hairs, particularly on curly beard hair

Clients with very curly beard hair are at high risk of pseudofolliculitis barbae — razor bumps caused by a sharply cut hair curling back into the skin. For these clients, shave with the grain only , do not stretch the skin excessively, and consider recommending a trimmed rather than shaved finish. Do not attempt to treat existing lesions; that is medical practice under § 160.27(c).

4. Finishing

Rinse the face with cool water to close the pores and remove residual lather.

Apply a cool towel , then blot dry — do not rub.

Apply an aftershave or moisturiser appropriate to the skin; alcohol-heavy products sting and dry.

Inspect in good light and touch up with the client's confirmation.

Dispose of the blade in the rigid sharps container, bag the towels in the covered receptacle, and clean and disinfect the handle, chair and surfaces.

5. Mustache and Beard Shaping

Beard design follows the same principle as haircutting: balance the face .

  • Face shape Beard approach
  • Round Length at the chin, close at the cheeks, to lengthen
  • Square Softer, rounded corners; avoid a sharp square line at the jaw
  • Oblong / long Fuller at the cheeks, shorter at the chin, to add width
  • Heart Fuller at the jaw to balance a narrow chin
  • Technique

Comb the beard out in its growth direction and assess density and any patchy areas before cutting.

Set the overall length with a clipper and guard, or with scissor-over-comb for finer control.

Establish the cheek line — the upper boundary on the cheek. A natural line follows the growth; a defined line is cut in a gentle curve from the sideburn toward the corner of the mouth, never a straight diagonal that looks drawn on.

Establish the neckline — conventionally about one to one and a half finger-widths above the Adam's apple, curving up toward the ears. Setting it at the jawline is the most common error and makes the beard look shaved off.

Balance both sides by checking from the front, not by measuring from the side.

Mustache: comb down, trim along the lip line with the client's mouth closed and lips relaxed, working from the centre outward, checking symmetry against the philtrum.

Detail the edges with a trimmer, then remove stray hairs.

Throughout, remember the sanitation constants: fresh blade, gloves if bleeding can be anticipated, no styptic pencil, no shared mug, and every reusable implement through the § 160.17 reprocessing sequence.