Study guide

8.6 Texturising, Clipper Cutting and Cross-Checking

New York Cosmetology Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: New York Licensing Law & Professional Requirements

1.1 GBL Article 27, Scope of Practice & Who Must Be Licensed 1.2 Qualifying for Licensure: Age, 1,000 Hours, Health Certificate & the Temporary Licence 1.3 The Written and Practical Examinations: Format, Fees, Admittance & Results 1.4 Licence Term, Renewal, Lapse, Fees & Out-of-State Applicants 1.5 State and Federal Payroll and New York Sales Tax Requirements 1.6 Professional Ethics, Conduct & the Domestic Violence and Sexual Assault Awareness Requirement 1.7 Career Opportunities, Placement, Professional Organizations & Trade Shows

2 Chapter 2: Safety and Health — New York Salon Regulation

2.1 Salon Facilities, Plumbing and Nail-Salon Ventilation Standards 2.2 Business Licensing, Bonds, Mandatory Postings, Inspections and Penalties 2.3 OSHA Hazard Communication, Safety Data Sheets, Chemical Storage & Labelling 2.4 Hygienic Practices, Sanitary Dress, Towels and Linens

3 Chapter 3: Infection Control

3.1 Types, Classification, Growth and Reproduction of Infectious Organisms 3.2 Viruses, Fungi, Parasites and Modes of Transmission 3.3 Immunity and Body Defenses 3.4 Decontamination Levels, Physical and Chemical Agents 3.5 New York Implement Reprocessing and Prohibited Items (§§ 160.17, 160.18) 3.6 Blood, Body Fluids and Client Contact Procedures (§ 160.19)

4 Chapter 4: Anatomy, Physiology & Nutrition

4.1 Cells, Tissues, Organs and the Body Systems 4.2 Bones of the Head, Face, Neck, Arms, Hands, Legs and Feet 4.3 Muscles of the Head, Face, Neck, Arms and Legs 4.4 The Circulatory System and Blood Supply of the Head, Face and Neck 4.5 The Nervous System and the Cranial Nerves 4.6 Basic Principles of Nutrition

5 Chapter 5: Chemistry as Applied to Cosmetology

5.1 Matter, Elements, Compounds, Mixtures and Chemical Reactions 5.2 Solutions, Suspensions, Emulsions and Oxidation-Reduction Reactions 5.3 The pH Scale and FDA Law Governing Hair Care Products

6 Chapter 6: Hair Analysis, Scalp and Hair Disorders

6.1 Hair Structure: Root, Shaft and the Three Layers 6.2 Chemical Composition, Side Bonds and Hair Pigment 6.3 Growth Cycles, Growth Patterns and Wave Patterns 6.4 Hair Analysis: Texture and Density 6.5 Porosity, Elasticity and Other Diagnostic Factors 6.6 Dandruff, Alopecia and Hair Shaft Disorders 6.7 Fungal Infections, Infestations and Bacterial Infections

7 Chapter 7: Shampoos, Rinses, Conditioners & Treatments

7.1 Client Preparation, Draping, Analysis and Consultation 7.2 Hair Analysis Instruments and Equipment 7.3 Shampoo, Rinse and Conditioner Products, Composition and Procedures 7.4 The Scalp, Manipulations and Treatments for Hair and Scalp Disorders

8 Chapter 8: Hair Cutting and Shaping

8.1 Fundamentals of Design: Reference Points, Lines and Sections 8.2 Elevation, Guidelines and Overdirection 8.3 Scissor Haircutting: Nomenclature, Care of Shears and Grip 8.4 Razor Haircutting, Clippers, Combs and Ergonomics 8.5 Scissor Techniques: Blunt, Graduated, Uniform and Long-Layered Cuts 8.6 Texturising, Clipper Cutting and Cross-Checking 8.7 Contemporary and Specialised Haircutting: Female, Male and Children's Styles 8.8 Shaving, Mustache and Beard Shaping

9 Chapter 9: Hair Styling

9.1 Wet Styling Science, Finger Waving and Skip Waving 9.2 Pin Curling 9.3 Roller Styling and Patterns in Hairstyling 9.4 Finishing Techniques 9.5 Tools, Implements and Blow-Dry Styling 9.6 Thermal Curling and Flat Ironing 9.7 Hair Pressing 9.8 Twisting, Wrapping, Weaving, Extending, Locking and Braiding 9.9 Hair Pieces, Wigs and Extensions

10 Chapter 10: Chemical Restructuring

10.1 The Chemistry of Chemical Restructuring 10.2 Chemical Restructuring Products and Processing Dynamics 10.3 Client Consultation and Preliminary Procedures for Chemical Services 10.4 Permanent Waving: Rods, Wrapping Techniques and Procedures 10.5 Chemical Relaxers: Products and Application 10.6 Curl Re-formation and Corrective Chemical Restructuring

11 Chapter 11: Hair Coloring and Lightening

11.1 Colour Theory and the Law of Colour 11.2 Tone, Intensity, the Level System and Underlying Pigment 11.3 Classifications of Haircolour: Temporary Through Permanent 11.4 Developer Chemistry, Vegetable Dyes and Metallic Salts 11.5 Client Consultation and Preliminary Procedures for Colour 11.6 Hair Lightening, Decolorisation and Toning 11.7 Special Effects: Foiling, Balayage and Dimensional Placement 11.8 Corrective Colour Procedures

12 Chapter 12: Nail Care and Procedures

12.1 Nail Structure, Growth, and Nail Shape and Colour Analysis 12.2 Nail Disorders and Diseases 12.3 Manicuring, Pedicuring and Manipulations of the Hand, Arm, Leg and Foot 12.4 Foot Spa Sanitation and New York's Prohibited Implements 12.5 Nail Tips, Wraps, Liquid and Powder Extensions and Gels

13 Chapter 13: Skin Care and Procedures

13.1 Structure and Function of the Skin 13.2 Skin Conditions and Disorders 13.3 Facial Procedures, Skin Analysis, Exfoliation and Enhancement Products 13.4 Temporary Methods of Hair Removal 13.5 Make-Up Application, Eyebrow Contouring and Lash Services

14 Chapter 14: The New York Practical Examination

14.1 Practical Exam Format, Scheduling, Admittance and Results 14.2 Work Area Setup, Mannequin Preparation and the Haircutting Procedure 14.3 Blow-Dry, Thermal Curling, Roller Placement, Perm Panel, Pin Curl Wave and Finger Wave 14.4 Chemical Service Simulations: Foiling, Haircolour Retouch and Relaxer

8.6 Texturising, Clipper Cutting and Cross-Checking

Key Takeaways Explain This Topic AI

Slide cutting, point cutting, notching and slithering are shear texturising techniques that remove weight without shortening the overall length.

Thinning shears are kept a safe distance from the scalp, with the distance increasing on coarser hair to avoid visible stubble.

Clipper guard numbers correspond to standard cutting lengths, with each number adding roughly one eighth of an inch.

Cross-checking means parting the hair in the exact opposite direction from which it was cut to reveal uneven lengths.

Point cutting is not permitted on the New York cosmetology practical examination.

Last updated: August 2026

Texturising, Clipper Cutting and Cross-Checking

Exam Focus: One New York-specific rule governs this section on the practical examination: point cutting is expressly not allowed, and bulk must be removed with thinning shears, a razor or shears instead. On the written examination, expect items on the named texturising techniques, guard lengths, taper versus fade, and the cross-checking rule.

1. Advanced Texturizing Techniques with Shears

Texturizing is the art of removing excess bulk and creating customized interior movement, separation, and softness without altering the overall perimeter length of the haircut. Texturizing can be performed with straight haircutting shears, texturizing shears, or razors. ┌─────────────────────────────────────────────────────────────────────────────┐

  • │ SHEAR TEXTURIZING TECHNIQUES │
  • ├─────────────────────────────────────────────────────────────────────────────┤
  • │ • Point Cutting: Tips of shears inserted at an angle into ends. │
  • │ • Notching: Deeper, chunkier point cutting removing spaced snippets. │
  • │ • Slithering (Effilating): Shears partially open, slid along hair shaft. │
  • │ • Slicing: Shears partially open, fanned out, gliding mid-shaft to ends. │
  • │ • Carving: Visual separation created by rhythmic opening/closing in shears.│
  • └─────────────────────────────────────────────────────────────────────────────┘
  • Detailed Breakdown of Texturizing Methods

Technique Tool Used Execution Method Visual & Structural Effect

Point Cutting Straight Shears Hair subsection held between fingers; tips of shears are turned at a slight angle and snipped into the hair ends. Softens blunt ends; removes harsh lines; creates seamless blending without shortening length.

Notching Straight Shears Tips of shears are inserted deeper into ends (1/2" to 1") at a more aggressive angle, snipping out small triangular V-notches. Creates chunkier, more dramatic separation; excellent for thick, dense hair.

Free-Hand Notching Straight Shears Performed on dry hair without holding hair between fingers; stylist visually snips random pieces out of interior. Produces piecey, organic texture and weight release in textured and curly styles.

Slithering (Effilating) Straight Shears Hair section elevated; slightly open shear blades are slid rhythmically down the hair strand from mid-lengths toward ends. Reduces bulk throughout mid-lengths; creates graduated interior lengths and smooth movement.

Slicing Straight Shears Section fanned out over fingers; blades held slightly open and glided in a fluid motion through mid-shaft to ends. Removes bulk from dense interior sections; adds effortless separation and reduces weight pockets.

Carving Straight Shears Variation of slicing where shears are opened and partially closed while drawing them through shorter interior hair panels. Creates distinct visual ribbons of separation; excellent for modern short haircuts.

2. Texturizing with Thinning & Blending Shears

When using texturizing shears, the cosmetologist must adhere to strict distance rules from the scalp based on the client's natural hair texture. Cutting too close to the scalp creates short, stubby hairs that stand straight up and push the surrounding hair outward, creating unwanted bulk.

Safe Scalp Distances by Hair Texture SCALP DISTANCE RULES FOR THINNING SHEARS:

  • Fine Hair: |======| 1" to 1.5" away from scalp
  • (Cutting too close causes visible scalp & wispy texture)
  • Medium Hair: |============| 1" to 2" away from scalp
  • (Standard bulk reduction through mid-strands)
  • Coarse Hair: |==================| 1.5" to 3" away from scalp
  • (Cutting too close makes coarse hair stick straight up!)

Fine Hair: Texturize 1 to 1.5 inches away from the scalp. Fine hair has fewer cuticle layers; texturizing too close makes the scalp visible and weakens hair integrity.

Medium Hair: Texturize 1 to 2 inches away from the scalp. Provides ideal weight removal through the mid-shaft.

Coarse / Thick Hair: Texturize 1.5 to 3 inches away from the scalp. Coarse hair is rigid; cutting closer than 1.5 inches creates stiff, bristly under-layers that forcefully push outer hair upward.

Clinical Rule: Always assess texturizing on dry hair in its natural state. Wet hair clumps together and masks how much hair has actually been removed.

3. Clipper Cutting Mechanics, Guards & Fade Techniques

Clippers are electric haircutting tools powered by a rotary, magnetic, or pivot motor. Clippers feature two blades: a stationary bottom comb blade and a rapidly oscillating top cutter blade.

Standard Clipper Guard Metric System

Clipper attachment guards snap over the stationary blade to regulate the exact length of hair remaining on the scalp.

  • Guard Number Cut Length (Inches) Cut Length (Millimeters) Typical Usage in Barbering / Styling
  • #0 1/16 inch 1.5 mm High bald fades, skin taper transitions, tight perimeter cleaning
  • #1 1/8 inch 3 mm Short fades, buzz cuts, tight neckline tapering
  • #2 1/4 inch 6 mm Standard crew cuts, blending side panels into top lengths
  • #3 3/8 inch 10 mm Medium crop sides, transition blending below parietal ridge
  • #4 1/2 inch 13 mm Classic side length, conservative tapers, longer buzz cuts
  • #5 5/8 inch 16 mm Blending sides into longer scissor-cut tops
  • #6 3/4 inch 19 mm Longer classic scissor-alternative lengths
  • #7 7/8 inch 22 mm Long tapered silhouettes
  • #8 1.0 inch 25 mm Maximum guard length; soft shaping and bulk removal
  • Clipper-Over-Comb Technique

Place the clipper comb into the hair with teeth angled upward.

Comb hair upward against the direction of natural growth.

Turn the comb angle slightly outward away from the scalp at the top to build a smooth, tapered transition toward the parietal ridge.

Glide the clippers horizontally across the back of the comb from left to right, cutting hair protruding through teeth.

Keep the comb moving smoothly; never stop the comb while the clippers are actively cutting.

Taper vs. Fade Haircuts

Taper Cut: Hair transitions smoothly from short length at the neckline and sideburns to longer lengths on top, while preserving the natural perimeter hairline .

Fade Cut: Hair is blended down to bare scalp/skin (skin fade/bald fade) at the lowest perimeter points, removing the natural hairline boundary entirely.

4. Clipper Maintenance, Blade Alignment & EPA Sanitation

Proper clipper sanitation and mechanical maintenance are strict state board requirements to prevent cross-contamination and client lacerations. ┌─────────────────────────────────────────────────────────────────────────────┐

  • │ DAILY CLIPPER SANITATION & MAINTENANCE │
  • ├─────────────────────────────────────────────────────────────────────────────┤
  • │ 1. Debris Removal: Brush away all loose hair clippings from blade teeth. │
  • │ 2. EPA Disinfection: Spray blades thoroughly with an EPA-registered │
  • │ hospital-grade clipper disinfectant spray (e.g., 5-in-1 formula). │
  • │ 3. Contact Time: Allow disinfectant to remain wet for manufacturer time. │
  • │ 4. Lubrication: Place 3 drops of clipper oil across blade teeth & 1 drop │
  • │ at each back rail corner; run clipper for 10 seconds to distribute. │
  • │ 5. Wipe Excess: Wipe away excess oil with a clean disposable towel. │
  • └─────────────────────────────────────────────────────────────────────────────┘
  • Clipper Blade Alignment Rules

When adjusting or replacing adjustable clipper blades, ensure the moving top blade is set 1/32" to 1/16" behind the stationary bottom blade .

Zero-Gapping Danger: If the moving blade extends flush with or past the stationary blade teeth, it will pinch and cut the client's skin directly.

  • 5. Trimmer Detailing & Cross-Checking Procedures
  • Trimmers (Edgers / Detailers)

Trimmers feature smaller, fine-toothed T-blades designed for outlining, perimeter edging, detailing around ears, cleaning the back neckline, and sculpting sideburns. Trimmers are held with the blade flat or angled lightly against the skin to create crisp design boundaries.

Cross-Checking: The Universal Quality Control Rule

Cross-checking is the precision technique of parting the hair in the exact opposite direction from which it was cut to inspect for balance, symmetry, and stray lengths. CUTTING DIRECTION CROSS-CHECKING DIRECTION

  • Horizontal Partings ────────► Vertical Partings
  • (e.g., Blunt / Bob) (Inspect horizontal lines for true level)
  • Vertical Partings ────────► Horizontal Partings
  • (e.g., Uniform Layers) (Inspect vertical layers for even contour)
  • Diagonal Forward Partings ────────► Diagonal Back Partings
  • (e.g., A-Line Bobs) (Inspect beveling and perimeter flow)
  • Visual Balance Checks

After cross-checking with combs, perform visual balance checks using anatomical reference points:

Compare sideburn lengths against the bottom of the earlobes.

Compare front facial framing lengths against the client's chin and collarbones.

Step back several feet from the styling station and inspect the silhouette in the mirror from front, sides, and rear.

6. Texturising on the New York Practical Examination

The DOS Cosmetology Practical Examination Procedural Overview is explicit on two points that override general practice during the examination:

"Point cutting is not allowed on this examination." Bulk removal during the haircutting procedure must be demonstrated using thinning shears, a razor, or shears — the candidate's choice — but not point cutting.

The removal of excess bulk must be demonstrated in the examiner's direct presence , so it is timed and observed rather than done quietly while the examiner is elsewhere.

A related constraint shapes how much you may remove: after the haircut, a hanging length of six inches minimum and seven inches maximum must remain for the procedures that follow — blow-drying, thermal curling, roller placement, perm wrapping, pin curls, finger waving, foiling, colour retouch and relaxer simulation. Over-texturising early costs marks later in the examination. Chapter 14 covers the full sequence.

Loading diagram... Cross-Checking and Quality Control Principles