Study guide

9.2 Pin Curling

New York Cosmetology Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: New York Licensing Law & Professional Requirements

1.1 GBL Article 27, Scope of Practice & Who Must Be Licensed 1.2 Qualifying for Licensure: Age, 1,000 Hours, Health Certificate & the Temporary Licence 1.3 The Written and Practical Examinations: Format, Fees, Admittance & Results 1.4 Licence Term, Renewal, Lapse, Fees & Out-of-State Applicants 1.5 State and Federal Payroll and New York Sales Tax Requirements 1.6 Professional Ethics, Conduct & the Domestic Violence and Sexual Assault Awareness Requirement 1.7 Career Opportunities, Placement, Professional Organizations & Trade Shows

2 Chapter 2: Safety and Health — New York Salon Regulation

2.1 Salon Facilities, Plumbing and Nail-Salon Ventilation Standards 2.2 Business Licensing, Bonds, Mandatory Postings, Inspections and Penalties 2.3 OSHA Hazard Communication, Safety Data Sheets, Chemical Storage & Labelling 2.4 Hygienic Practices, Sanitary Dress, Towels and Linens

3 Chapter 3: Infection Control

3.1 Types, Classification, Growth and Reproduction of Infectious Organisms 3.2 Viruses, Fungi, Parasites and Modes of Transmission 3.3 Immunity and Body Defenses 3.4 Decontamination Levels, Physical and Chemical Agents 3.5 New York Implement Reprocessing and Prohibited Items (§§ 160.17, 160.18) 3.6 Blood, Body Fluids and Client Contact Procedures (§ 160.19)

4 Chapter 4: Anatomy, Physiology & Nutrition

4.1 Cells, Tissues, Organs and the Body Systems 4.2 Bones of the Head, Face, Neck, Arms, Hands, Legs and Feet 4.3 Muscles of the Head, Face, Neck, Arms and Legs 4.4 The Circulatory System and Blood Supply of the Head, Face and Neck 4.5 The Nervous System and the Cranial Nerves 4.6 Basic Principles of Nutrition

5 Chapter 5: Chemistry as Applied to Cosmetology

5.1 Matter, Elements, Compounds, Mixtures and Chemical Reactions 5.2 Solutions, Suspensions, Emulsions and Oxidation-Reduction Reactions 5.3 The pH Scale and FDA Law Governing Hair Care Products

6 Chapter 6: Hair Analysis, Scalp and Hair Disorders

6.1 Hair Structure: Root, Shaft and the Three Layers 6.2 Chemical Composition, Side Bonds and Hair Pigment 6.3 Growth Cycles, Growth Patterns and Wave Patterns 6.4 Hair Analysis: Texture and Density 6.5 Porosity, Elasticity and Other Diagnostic Factors 6.6 Dandruff, Alopecia and Hair Shaft Disorders 6.7 Fungal Infections, Infestations and Bacterial Infections

7 Chapter 7: Shampoos, Rinses, Conditioners & Treatments

7.1 Client Preparation, Draping, Analysis and Consultation 7.2 Hair Analysis Instruments and Equipment 7.3 Shampoo, Rinse and Conditioner Products, Composition and Procedures 7.4 The Scalp, Manipulations and Treatments for Hair and Scalp Disorders

8 Chapter 8: Hair Cutting and Shaping

8.1 Fundamentals of Design: Reference Points, Lines and Sections 8.2 Elevation, Guidelines and Overdirection 8.3 Scissor Haircutting: Nomenclature, Care of Shears and Grip 8.4 Razor Haircutting, Clippers, Combs and Ergonomics 8.5 Scissor Techniques: Blunt, Graduated, Uniform and Long-Layered Cuts 8.6 Texturising, Clipper Cutting and Cross-Checking 8.7 Contemporary and Specialised Haircutting: Female, Male and Children's Styles 8.8 Shaving, Mustache and Beard Shaping

9 Chapter 9: Hair Styling

9.1 Wet Styling Science, Finger Waving and Skip Waving 9.2 Pin Curling 9.3 Roller Styling and Patterns in Hairstyling 9.4 Finishing Techniques 9.5 Tools, Implements and Blow-Dry Styling 9.6 Thermal Curling and Flat Ironing 9.7 Hair Pressing 9.8 Twisting, Wrapping, Weaving, Extending, Locking and Braiding 9.9 Hair Pieces, Wigs and Extensions

10 Chapter 10: Chemical Restructuring

10.1 The Chemistry of Chemical Restructuring 10.2 Chemical Restructuring Products and Processing Dynamics 10.3 Client Consultation and Preliminary Procedures for Chemical Services 10.4 Permanent Waving: Rods, Wrapping Techniques and Procedures 10.5 Chemical Relaxers: Products and Application 10.6 Curl Re-formation and Corrective Chemical Restructuring

11 Chapter 11: Hair Coloring and Lightening

11.1 Colour Theory and the Law of Colour 11.2 Tone, Intensity, the Level System and Underlying Pigment 11.3 Classifications of Haircolour: Temporary Through Permanent 11.4 Developer Chemistry, Vegetable Dyes and Metallic Salts 11.5 Client Consultation and Preliminary Procedures for Colour 11.6 Hair Lightening, Decolorisation and Toning 11.7 Special Effects: Foiling, Balayage and Dimensional Placement 11.8 Corrective Colour Procedures

12 Chapter 12: Nail Care and Procedures

12.1 Nail Structure, Growth, and Nail Shape and Colour Analysis 12.2 Nail Disorders and Diseases 12.3 Manicuring, Pedicuring and Manipulations of the Hand, Arm, Leg and Foot 12.4 Foot Spa Sanitation and New York's Prohibited Implements 12.5 Nail Tips, Wraps, Liquid and Powder Extensions and Gels

13 Chapter 13: Skin Care and Procedures

13.1 Structure and Function of the Skin 13.2 Skin Conditions and Disorders 13.3 Facial Procedures, Skin Analysis, Exfoliation and Enhancement Products 13.4 Temporary Methods of Hair Removal 13.5 Make-Up Application, Eyebrow Contouring and Lash Services

14 Chapter 14: The New York Practical Examination

14.1 Practical Exam Format, Scheduling, Admittance and Results 14.2 Work Area Setup, Mannequin Preparation and the Haircutting Procedure 14.3 Blow-Dry, Thermal Curling, Roller Placement, Perm Panel, Pin Curl Wave and Finger Wave 14.4 Chemical Service Simulations: Foiling, Haircolour Retouch and Relaxer

9.2 Pin Curling

Key Takeaways Explain This Topic AI

A pin curl has three parts: the base, the stem and the circle.

A no-stem curl is placed directly on the base and produces the tightest, firmest and longest-lasting curl.

A half-stem curl permits medium movement; a full-stem curl gives the greatest mobility and the loosest result.

The four primary pin curl bases are rectangular, triangular, arc or half-moon, and square.

Triangular bases are used along the front or facial hairline to prevent splits and blend the curls.

Last updated: August 2026

Pin Curling

Exam Focus: The stem mobility table and the base shape table between them produce most pin curl exam items. On the practical examination, the diagonal pin curl wave requires a diagonal ridge with three or more overlapping clockwise ridge curls carved from the shaping, then a diagonal C-shaping behind them with three or more counterclockwise carved curls.

1. Pin Curl Anatomy & Stem Mobility Principles

Pin curls serve as the basis for patterns, lines, waves, curls, and rolls. They can be used on all hair textures and hair types.

  • The Three Anatomical Parts of a Pin Curl
  • Every pin curl consists of three distinct anatomical zones: ┌─────────────────────────────┐
  • │ PIN CURL ANATOMY │
  • └─────────────────────────────┘
  • Circle / Curl (Forms wave/curl)
  • ╭─────────╮
  • │ ● ● │
  • ╰───┬─────╯
  • │ <── Stem (Controls movement & direction)
  • │
  • ┌────┴────┐
  • │ BASE │ <── Base (Stationary foundation on scalp)
  • └─────────┘

Base (Foundation): The stationary (non-moving) foundation of the curl attached directly to the scalp. It is the area on which the pin curl is placed.

Stem: The section of the hair strand between the base and the first turn of the circle. The stem gives the curl its direction and mobility .

Circle (Curl): The hair that is wrapped around the finger to form the complete curl. The size of the circle determines the width of the wave and its overall tightness.

Curl Mobility Classifications

The amount of movement (mobility) in a finished section of hair is governed by the length and placement of the stem:

Stem Classification Stem Placement Relative to Base Resulting Movement & Curl Behavior

No-Stem Curl The curl sits directly on top of its base . Minimum mobility; produces a tight, firm, long-lasting curl with maximum control and minimum movement.

Half-Stem Curl The curl sits halfway off its base . Medium mobility; allows a moderate amount of movement and freedom while maintaining good base control.

Full-Stem Curl The curl sits completely off its base . Maximum mobility; the stem extends entirely beyond the base before forming the circle. Produces a loose, soft, wave-like curl with maximum freedom of movement. ┌─────────────────┐ ┌─────────────────┐ ┌─────────────────┐

  • │ NO-STEM CURL │ │ HALF-STEM CURL │ │ FULL-STEM CURL │
  • │ (On-Base) │ │ (Half-Base) │ │ (Off-Base) │
  • ├─────────────────┤ ├─────────────────┤ ├─────────────────┤
  • │ ╭─────────╮ │ │ ╭─────────╮│ │ ╭──────╮│
  • │ │ Circle │ │ │ │ Circle ││ │ │Circle││
  • │ ╰────┬────╯ │ │ ╰───┬─────╯│ │ ╰──┬───╯│
  • │ ┌────┴────┐ │ │ ┌───────┴──┐ │ │ │Stem│
  • │ │ Base │ │ │ │ Base │ │ │ ┌───────┐ │ │
  • │ └─────────┘ │ │ └──────────┘ │ │ │ Base │─┘ │
  • │ │ │ │ │ └───────┘ │
  • │ Tight, Firm │ │ Medium Movement │ │ Maximum Freedom │
  • └─────────────────┘ └─────────────────┘ └─────────────────┘
  • 2. Pin Curl Base Geometry & Shaping
  • Shaping Definition

A shaping is a section of hair molded in a circular movement in preparation for the formation of curls. Shapings are classified as open-end or closed-end :

Open-End Shaping: Hair is molded in a forward or outward motion where the curl begins at the open end.

Closed-End Shaping: Hair is directed away from the face toward the crown.

The Four Primary Pin Curl Bases

To prevent visible splits or breaks in the finished hairstyle, bases must be selected according to their head location and design purpose: ┌─────────────────┐ ┌─────────────────┐ ┌─────────────────┐ ┌─────────────────┐

  • │ RECTANGULAR │ │ TRIANGULAR │ │ ARC / C-SHAPE │ │ SQUARE │
  • │ BASE │ │ BASE │ │ (HALF-MOON) │ │ BASE │
  • ├─────────────────┤ ├─────────────────┤ ├─────────────────┤ ├─────────────────┤
  • │ ┌───────────┐ │ │ /\ │ │ ╭─────╮ │ │ ┌─────────┐ │
  • │ │ │ │ │ / \ │ │ ( ) │ │ │ │ │
  • │ └───────────┘ │ │ /____\ │ │ ╰─────╯ │ │ └─────────┘ │
  • │ │ │ │ │ │ │ │
  • │ Side front hair-│ │ Along front │ │ Carved from arc │ │ Suitable for │
  • │ line for smooth │ │ hairline to │ │ shapings; nape │ │ uniform curls │
  • │ upsweep styling │ │ prevent splits │ │ and hairline │ │ throughout head │
  • └─────────────────┘ └─────────────────┘ └─────────────────┘ └─────────────────┘

Rectangular Base: Formed with parallel horizontal and vertical lines. Recommended at the side front hairline for a smooth, upswept effect. Sections must overlap slightly to avoid parting lines.

Triangular Base: Recommended along the front facial hairline or fringe area. Triangular bases allow the hair to overlap without creating visible parts, effectively preventing splits in the finished combed-out style.

Arc Base (Half-Moon / C-Shaped Base): Carved out of a circular shaping. Arc bases give good direction and are used at the hairline, temple, and nape of the neck.

Square Base: Formed with equal length and width partings. Suitable for curly hairstyles without much volume or lift. Square bases are used throughout the entire head when bricklay or staggered placement is applied to prevent splits.

3. Specialized Pin Curl Techniques

Cascade Curls (Stand-Up Curls): Curls fastened in a standing, perpendicular position on a rectangular base. Stand-up pin curls are used to create height, volume, and root lift in hair design, functioning identically to small rollers.

Ridge Curls: Pin curls placed immediately behind or below a finger wave ridge. They are used to accentuate and deepen the wave line without flattening the crest.

Skip Waves: Two alternating rows of ridge curls combined with finger waves (one row of finger waves followed by a row of ridge curls). Skip waves create strong, deep, undulating wave patterns with high structural contrast.

Carved Curls (Sculptured Curls): Pin curls sliced directly out of an arc shaping without lifting the hair from the scalp. Carved curls produce smooth, close-to-the-head wave movements.

4. Pin Curls on the New York Practical Examination

The examination allots ten minutes for the diagonal pin curl wave and C-shaping on the right side of the head , and specifies the construction precisely:

On the first panel , form a diagonal ridge at the front hairline.

Carve three or more overlapping clockwise ridge curls , approximately one inch in diameter , out of the ridge from the open end of the shaping .

On the second panel , behind the ridge curls, form a diagonal C-shaping .

Carve three or more overlapping counterclockwise pin curls from that C-shaping.

Hair styling gel, finger wave lotion or water may be used.

Two details decide marks here. First, the curls are carved out of the shaping , not sub-sectioned and wound separately — the comb carves each curl from the continuous mould so the ridge line stays unbroken. Second, the directions alternate : clockwise ridge curls in front, counterclockwise carved curls behind. Reversing them breaks the wave.

Chapter 14 sets out the full sequence, including that these procedures are left in until the examiner instructs the candidate to take them down after the finger wave.

5. Securing and Drying

Clip without denting. A clip that crosses the circle of the curl leaves a mark that survives the brush-out. Secure from the open end, with the clip lying flat against the base.

Dry completely. Pin curls, like every wet set, hold only if the hydrogen bonds re-form fully. Removing clips while the hair is even slightly damp loses the shape.

Let the hair cool before removing clips. Cooling is when the bonds settle.

Remove clips systematically , in the reverse order they were placed, then brush out from the ends upward.