Study guide
9.3 Roller Styling and Patterns in Hairstyling
New York Cosmetology Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: New York Licensing Law & Professional Requirements
1.1 GBL Article 27, Scope of Practice & Who Must Be Licensed 1.2 Qualifying for Licensure: Age, 1,000 Hours, Health Certificate & the Temporary Licence 1.3 The Written and Practical Examinations: Format, Fees, Admittance & Results 1.4 Licence Term, Renewal, Lapse, Fees & Out-of-State Applicants 1.5 State and Federal Payroll and New York Sales Tax Requirements 1.6 Professional Ethics, Conduct & the Domestic Violence and Sexual Assault Awareness Requirement 1.7 Career Opportunities, Placement, Professional Organizations & Trade Shows
2 Chapter 2: Safety and Health — New York Salon Regulation
2.1 Salon Facilities, Plumbing and Nail-Salon Ventilation Standards 2.2 Business Licensing, Bonds, Mandatory Postings, Inspections and Penalties 2.3 OSHA Hazard Communication, Safety Data Sheets, Chemical Storage & Labelling 2.4 Hygienic Practices, Sanitary Dress, Towels and Linens
3 Chapter 3: Infection Control
3.1 Types, Classification, Growth and Reproduction of Infectious Organisms 3.2 Viruses, Fungi, Parasites and Modes of Transmission 3.3 Immunity and Body Defenses 3.4 Decontamination Levels, Physical and Chemical Agents 3.5 New York Implement Reprocessing and Prohibited Items (§§ 160.17, 160.18) 3.6 Blood, Body Fluids and Client Contact Procedures (§ 160.19)
4 Chapter 4: Anatomy, Physiology & Nutrition
4.1 Cells, Tissues, Organs and the Body Systems 4.2 Bones of the Head, Face, Neck, Arms, Hands, Legs and Feet 4.3 Muscles of the Head, Face, Neck, Arms and Legs 4.4 The Circulatory System and Blood Supply of the Head, Face and Neck 4.5 The Nervous System and the Cranial Nerves 4.6 Basic Principles of Nutrition
5 Chapter 5: Chemistry as Applied to Cosmetology
5.1 Matter, Elements, Compounds, Mixtures and Chemical Reactions 5.2 Solutions, Suspensions, Emulsions and Oxidation-Reduction Reactions 5.3 The pH Scale and FDA Law Governing Hair Care Products
6 Chapter 6: Hair Analysis, Scalp and Hair Disorders
6.1 Hair Structure: Root, Shaft and the Three Layers 6.2 Chemical Composition, Side Bonds and Hair Pigment 6.3 Growth Cycles, Growth Patterns and Wave Patterns 6.4 Hair Analysis: Texture and Density 6.5 Porosity, Elasticity and Other Diagnostic Factors 6.6 Dandruff, Alopecia and Hair Shaft Disorders 6.7 Fungal Infections, Infestations and Bacterial Infections
7 Chapter 7: Shampoos, Rinses, Conditioners & Treatments
7.1 Client Preparation, Draping, Analysis and Consultation 7.2 Hair Analysis Instruments and Equipment 7.3 Shampoo, Rinse and Conditioner Products, Composition and Procedures 7.4 The Scalp, Manipulations and Treatments for Hair and Scalp Disorders
8 Chapter 8: Hair Cutting and Shaping
8.1 Fundamentals of Design: Reference Points, Lines and Sections 8.2 Elevation, Guidelines and Overdirection 8.3 Scissor Haircutting: Nomenclature, Care of Shears and Grip 8.4 Razor Haircutting, Clippers, Combs and Ergonomics 8.5 Scissor Techniques: Blunt, Graduated, Uniform and Long-Layered Cuts 8.6 Texturising, Clipper Cutting and Cross-Checking 8.7 Contemporary and Specialised Haircutting: Female, Male and Children's Styles 8.8 Shaving, Mustache and Beard Shaping
9 Chapter 9: Hair Styling
9.1 Wet Styling Science, Finger Waving and Skip Waving 9.2 Pin Curling 9.3 Roller Styling and Patterns in Hairstyling 9.4 Finishing Techniques 9.5 Tools, Implements and Blow-Dry Styling 9.6 Thermal Curling and Flat Ironing 9.7 Hair Pressing 9.8 Twisting, Wrapping, Weaving, Extending, Locking and Braiding 9.9 Hair Pieces, Wigs and Extensions
10 Chapter 10: Chemical Restructuring
10.1 The Chemistry of Chemical Restructuring 10.2 Chemical Restructuring Products and Processing Dynamics 10.3 Client Consultation and Preliminary Procedures for Chemical Services 10.4 Permanent Waving: Rods, Wrapping Techniques and Procedures 10.5 Chemical Relaxers: Products and Application 10.6 Curl Re-formation and Corrective Chemical Restructuring
11 Chapter 11: Hair Coloring and Lightening
11.1 Colour Theory and the Law of Colour 11.2 Tone, Intensity, the Level System and Underlying Pigment 11.3 Classifications of Haircolour: Temporary Through Permanent 11.4 Developer Chemistry, Vegetable Dyes and Metallic Salts 11.5 Client Consultation and Preliminary Procedures for Colour 11.6 Hair Lightening, Decolorisation and Toning 11.7 Special Effects: Foiling, Balayage and Dimensional Placement 11.8 Corrective Colour Procedures
12 Chapter 12: Nail Care and Procedures
12.1 Nail Structure, Growth, and Nail Shape and Colour Analysis 12.2 Nail Disorders and Diseases 12.3 Manicuring, Pedicuring and Manipulations of the Hand, Arm, Leg and Foot 12.4 Foot Spa Sanitation and New York's Prohibited Implements 12.5 Nail Tips, Wraps, Liquid and Powder Extensions and Gels
13 Chapter 13: Skin Care and Procedures
13.1 Structure and Function of the Skin 13.2 Skin Conditions and Disorders 13.3 Facial Procedures, Skin Analysis, Exfoliation and Enhancement Products 13.4 Temporary Methods of Hair Removal 13.5 Make-Up Application, Eyebrow Contouring and Lash Services
14 Chapter 14: The New York Practical Examination
14.1 Practical Exam Format, Scheduling, Admittance and Results 14.2 Work Area Setup, Mannequin Preparation and the Haircutting Procedure 14.3 Blow-Dry, Thermal Curling, Roller Placement, Perm Panel, Pin Curl Wave and Finger Wave 14.4 Chemical Service Simulations: Foiling, Haircolour Retouch and Relaxer
9.3 Roller Styling and Patterns in Hairstyling
Key Takeaways Explain This Topic AI
A roller placed on base, with the section held at 45 degrees above the centre of the base, produces maximum volume and root lift.
A half-off-base roller gives medium volume; an off-base roller gives the least volume and the most movement.
The number of complete turns around the roller determines the strength of the curl, with two and a half turns generally required for a defined curl.
Indentation styling produces a hollow or bevelled effect by directing the hair under rather than over the roller.
The New York practical examination requires three 1⅛-inch rollers on the top of the head — one on base, one half off base and one off base.
Last updated: August 2026
Roller Styling and Patterns in Hairstyling
Exam Focus: The base control table is high-yield on both examinations. The practical examination requires exactly three full-size 1⅛-inch rollers on the top section starting at the front hairline, all rolled away from the face, and grades the on-base, half-off-base and off-base placements in that order. Water only — no products.
1. Roller Placement Geometry, Angles & Volume Physics
Roller sets provide faster drying times, smoother surfaces, and stronger structural foundations than pin curls. A roller curl consists of three components equivalent to a pin curl: base , stem , and curl (circle) .
Base Control & Overdirection Angles
Base control refers to the position of the tool in relation to its base section, determined by the angle (elevation) at which the hair is held when wrapped: 135° (Overdirected Forward)
- \
- \
- \ 90° (Perpendicular)
- \ |
- \ | 45° (Underdirected)
- \ | /
- \|/
- ══════════════════════════●══════════════════════════ (Scalp Base)
- Detailed Base Control Comparison
Base Placement Projection Angle / Elevation Roller Resting Position Volume & Lift Result
On-Base (Full Base) Hair is overdirected forward at 135° (beyond perpendicular). Sits completely within its base boundaries. Maximum volume and root lift ; maximum tension at the base.
Half-Base (1/2 Base) Hair is held straight up at 90° perpendicular to base. Sits halfway on and halfway behind its base. Moderate / medium volume ; balanced movement and control.
Off-Base (0 Base) Hair is held at 45° underdirected (below perpendicular). Sits completely behind / off its base boundaries. Least volume / minimal lift ; maximum mobility and soft curvature.
Roller Circumference & Revolution Principles
The diameter of the roller and the number of times the hair wraps around the barrel dictate the resulting curl formation:
1 complete turn around roller: Produces a C-shape or subtle curve.
1.5 turns around roller: Produces a wave .
2.5 or more turns around roller: Produces a complete, round curl .
Indentation Styling
Indentation is the point where curls of opposite directions meet, forming a recessed area or hollow valley . Indentation can be created using rollers, thermal irons, or pin curls rolled in opposite directions to produce sharp structural contrast in modern and classic coiffures.
2. Patterns in Hairstyling
A pattern is the plan for a whole set — the arrangement of waves, pin curls and rollers across the head that produces a specific finished shape. Working to a pattern is what makes a set repeatable and what allows a stylist to predict the brush-out.
The standard patterns
Pattern Construction Finished effect
Curvature or shaping pattern Curved shapings and carved pin curls following the head's contours Soft, flowing waves; the basis of classic wave sets
Directional or straight-back pattern Rollers set in straight rows directed back from the face Height at the front, smooth movement back; the classic blow-out set
Alternating oblong pattern Rows of pin curls or rollers reversing direction row by row Deep, sculpted alternating waves
Combination pattern Rollers on the top and crown for volume; pin curls at the nape and around the hairline for close, controlled movement The most common professional approach — volume where the head is flat, control where it is curved
Skip wave pattern Finger-waved ridge alternating with a row of pin curls Deep sculpted waves with volume (section 9.1)
Choosing the pattern
Three questions decide the pattern before a single roller is placed:
Where does the finished style need volume? Rollers on base go there. Areas that must stay close get pin curls or off-base rollers.
Which direction should the hair move? Every roller and curl is set in the direction the finished hair must fall. Setting against the finished direction guarantees a fight at the brush-out.
What are the growth patterns? A whorl at the crown or a cowlick at the front hairline dictates where a part can sit and which direction a roller can be set. Section 6.3 covers identifying them.
Combination sets in practice
The reason combination patterns dominate professional work is anatomical. The top and crown are relatively flat , so hair there has no natural lift and needs on-base rollers to create it. The sides and nape curve away , so hair there already falls close to the head and needs control rather than volume — which is what pin curls, off-base rollers and smaller roller sizes provide.
A standard combination set:
Top and crown: on-base rollers, largest diameter, directed back or to the side depending on the part.
Sides above the parietal ridge: half-off-base rollers, directed back.
Sides below the parietal ridge: off-base rollers or barrel curls, for movement without width.
Nape: flat pin curls or small off-base rollers, for a close finish.
3. Brushing Out a Set
The brush-out is where sets are won and lost, and it follows a fixed order.
Ensure the hair is completely dry and has cooled. This is not negotiable.
Remove rollers and clips systematically , in the reverse order of setting, without pulling.
Relax the set by brushing the whole head thoroughly with a natural-bristle brush, from the ends upward. This feels counterintuitive but blends the individual roller marks into a continuous movement.
Brush the hair in the direction of the set , then into the direction of the finished style.
Build the shape with backcombing or backbrushing where volume is needed, as section 9.4 covers.
Smooth the surface with the brush or the bristle side of a comb, without disturbing the structure underneath.
Finish with the lightest product that will hold the shape.