Study guide

9.5 Tools, Implements and Blow-Dry Styling

New York Cosmetology Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: New York Licensing Law & Professional Requirements

1.1 GBL Article 27, Scope of Practice & Who Must Be Licensed 1.2 Qualifying for Licensure: Age, 1,000 Hours, Health Certificate & the Temporary Licence 1.3 The Written and Practical Examinations: Format, Fees, Admittance & Results 1.4 Licence Term, Renewal, Lapse, Fees & Out-of-State Applicants 1.5 State and Federal Payroll and New York Sales Tax Requirements 1.6 Professional Ethics, Conduct & the Domestic Violence and Sexual Assault Awareness Requirement 1.7 Career Opportunities, Placement, Professional Organizations & Trade Shows

2 Chapter 2: Safety and Health — New York Salon Regulation

2.1 Salon Facilities, Plumbing and Nail-Salon Ventilation Standards 2.2 Business Licensing, Bonds, Mandatory Postings, Inspections and Penalties 2.3 OSHA Hazard Communication, Safety Data Sheets, Chemical Storage & Labelling 2.4 Hygienic Practices, Sanitary Dress, Towels and Linens

3 Chapter 3: Infection Control

3.1 Types, Classification, Growth and Reproduction of Infectious Organisms 3.2 Viruses, Fungi, Parasites and Modes of Transmission 3.3 Immunity and Body Defenses 3.4 Decontamination Levels, Physical and Chemical Agents 3.5 New York Implement Reprocessing and Prohibited Items (§§ 160.17, 160.18) 3.6 Blood, Body Fluids and Client Contact Procedures (§ 160.19)

4 Chapter 4: Anatomy, Physiology & Nutrition

4.1 Cells, Tissues, Organs and the Body Systems 4.2 Bones of the Head, Face, Neck, Arms, Hands, Legs and Feet 4.3 Muscles of the Head, Face, Neck, Arms and Legs 4.4 The Circulatory System and Blood Supply of the Head, Face and Neck 4.5 The Nervous System and the Cranial Nerves 4.6 Basic Principles of Nutrition

5 Chapter 5: Chemistry as Applied to Cosmetology

5.1 Matter, Elements, Compounds, Mixtures and Chemical Reactions 5.2 Solutions, Suspensions, Emulsions and Oxidation-Reduction Reactions 5.3 The pH Scale and FDA Law Governing Hair Care Products

6 Chapter 6: Hair Analysis, Scalp and Hair Disorders

6.1 Hair Structure: Root, Shaft and the Three Layers 6.2 Chemical Composition, Side Bonds and Hair Pigment 6.3 Growth Cycles, Growth Patterns and Wave Patterns 6.4 Hair Analysis: Texture and Density 6.5 Porosity, Elasticity and Other Diagnostic Factors 6.6 Dandruff, Alopecia and Hair Shaft Disorders 6.7 Fungal Infections, Infestations and Bacterial Infections

7 Chapter 7: Shampoos, Rinses, Conditioners & Treatments

7.1 Client Preparation, Draping, Analysis and Consultation 7.2 Hair Analysis Instruments and Equipment 7.3 Shampoo, Rinse and Conditioner Products, Composition and Procedures 7.4 The Scalp, Manipulations and Treatments for Hair and Scalp Disorders

8 Chapter 8: Hair Cutting and Shaping

8.1 Fundamentals of Design: Reference Points, Lines and Sections 8.2 Elevation, Guidelines and Overdirection 8.3 Scissor Haircutting: Nomenclature, Care of Shears and Grip 8.4 Razor Haircutting, Clippers, Combs and Ergonomics 8.5 Scissor Techniques: Blunt, Graduated, Uniform and Long-Layered Cuts 8.6 Texturising, Clipper Cutting and Cross-Checking 8.7 Contemporary and Specialised Haircutting: Female, Male and Children's Styles 8.8 Shaving, Mustache and Beard Shaping

9 Chapter 9: Hair Styling

9.1 Wet Styling Science, Finger Waving and Skip Waving 9.2 Pin Curling 9.3 Roller Styling and Patterns in Hairstyling 9.4 Finishing Techniques 9.5 Tools, Implements and Blow-Dry Styling 9.6 Thermal Curling and Flat Ironing 9.7 Hair Pressing 9.8 Twisting, Wrapping, Weaving, Extending, Locking and Braiding 9.9 Hair Pieces, Wigs and Extensions

10 Chapter 10: Chemical Restructuring

10.1 The Chemistry of Chemical Restructuring 10.2 Chemical Restructuring Products and Processing Dynamics 10.3 Client Consultation and Preliminary Procedures for Chemical Services 10.4 Permanent Waving: Rods, Wrapping Techniques and Procedures 10.5 Chemical Relaxers: Products and Application 10.6 Curl Re-formation and Corrective Chemical Restructuring

11 Chapter 11: Hair Coloring and Lightening

11.1 Colour Theory and the Law of Colour 11.2 Tone, Intensity, the Level System and Underlying Pigment 11.3 Classifications of Haircolour: Temporary Through Permanent 11.4 Developer Chemistry, Vegetable Dyes and Metallic Salts 11.5 Client Consultation and Preliminary Procedures for Colour 11.6 Hair Lightening, Decolorisation and Toning 11.7 Special Effects: Foiling, Balayage and Dimensional Placement 11.8 Corrective Colour Procedures

12 Chapter 12: Nail Care and Procedures

12.1 Nail Structure, Growth, and Nail Shape and Colour Analysis 12.2 Nail Disorders and Diseases 12.3 Manicuring, Pedicuring and Manipulations of the Hand, Arm, Leg and Foot 12.4 Foot Spa Sanitation and New York's Prohibited Implements 12.5 Nail Tips, Wraps, Liquid and Powder Extensions and Gels

13 Chapter 13: Skin Care and Procedures

13.1 Structure and Function of the Skin 13.2 Skin Conditions and Disorders 13.3 Facial Procedures, Skin Analysis, Exfoliation and Enhancement Products 13.4 Temporary Methods of Hair Removal 13.5 Make-Up Application, Eyebrow Contouring and Lash Services

14 Chapter 14: The New York Practical Examination

14.1 Practical Exam Format, Scheduling, Admittance and Results 14.2 Work Area Setup, Mannequin Preparation and the Haircutting Procedure 14.3 Blow-Dry, Thermal Curling, Roller Placement, Perm Panel, Pin Curl Wave and Finger Wave 14.4 Chemical Service Simulations: Foiling, Haircolour Retouch and Relaxer

9.5 Tools, Implements and Blow-Dry Styling

Key Takeaways Explain This Topic AI

Blow-drying is a physical change: heat breaks hydrogen bonds and the hair sets in the shape the brush holds as it cools.

A concentrator nozzle directs airflow for smooth, controlled drying; a diffuser disperses airflow gently to preserve natural curl.

Round brushes create volume and curl; paddle brushes smooth; vent brushes speed rough drying.

The cool shot sets the shape by allowing hydrogen bonds to re-form while the hair is held in position.

All non-porous styling implements are cleaned and disinfected between clients under 19 NYCRR § 160.17(c)(1).

Last updated: August 2026

Tools, Implements and Blow-Dry Styling

Exam Focus: Blow-dry styling is the second graded procedure on the New York practical examination — the top and one side section, dried uniformly with a round bristle brush, using water only and no products, in fifteen minutes. Learn the attachment functions, the brush classifications, and the sectioning discipline that separates controlled drying from the random drying the examination expressly marks down.

1. The Styling Toolkit and Its Reprocessing

Every implement below is used on the hair or the scalp, so 19 NYCRR § 160.17(c)(1) applies: clean with warm water and soap or detergent to remove all hair and scalp debris, rinse, dry, immerse completely in an EPA hospital-grade disinfectant for 10 minutes or more , rinse, dry, and store in a drawer, cabinet or covered container.

  • Implement Use Notes
  • Wide-tooth comb Detangling, distributing product Detangle dry , from the ends upward
  • Tail comb Precise partings, sectioning Metal-tail versions conduct heat — keep clear of thermal tools
  • Cutting comb Fine and coarse teeth for cutting and smoothing —
  • Styling or teasing comb Backcombing, smoothing the surface —
  • Paddle brush Smoothing long hair; rough drying —

Round brush Volume, bend and curl during blow-drying Diameter sets the curl size; required by the practical examination

  • Vent brush Fast rough drying; airflow through the barrel —
  • Natural-bristle brush Distributing sebum, smoothing, brushing out sets Boar bristle closes the cuticle
  • Sectioning clips Holding sections; required for controlled blow-drying Butterfly and duckbill types
  • Blow-dryer Drying and styling Clean the filter regularly; a clogged filter overheats the element
  • Concentrator nozzle Directs and narrows the airflow For smooth, controlled drying
  • Diffuser Disperses airflow over a wide area Preserves natural curl and reduces frizz

Porous items — cotton, neck strips, wooden implements — are single use . Capes go into laundry, never against the client's skin, under § 160.20(d).

2. Blow-Dry Styling Science, Implements & Attachments

Blow-dry styling is the technique of drying and styling damp hair in a single operation. Directing heated air across the hair shaft evaporates water while brushes sculpt the hair into the desired form.

Nozzle Attachments & Airflow Dynamics

Directional Airflow Principle: Always direct the blow-dryer airflow from the scalp toward the ends (down the hair shaft) . This smooths the imbrications of the cuticle layer, reduces frizz, and imparts high shine.

Concentrator Nozzle: A narrow, directional nozzle attachment that creates a focused stream of high-velocity air. It is used to smooth the cuticle, straighten unruly textures, and achieve sleek, polished finishes.

Diffuser Attachment: A broad, perforated attachment that disperses airflow gently over a wide area. It allows textured or naturally curly hair to dry softly without disturbing the natural curl pattern or creating frizzy flyaways. ┌───────────────────────────────────┐ ┌───────────────────────────────────┐

  • │ CONCENTRATOR NOZZLE │ │ DIFFUSER ATTACHMENT │
  • ├───────────────────────────────────┤ ├───────────────────────────────────┤
  • │ • Narrow, slotted opening │ │ • Wide, bowl-shaped with prongs │
  • │ • Concentrates high-velocity air │ │ • Disperses & softens airflow │
  • │ • Directs airflow down cuticle │ │ • Preserves natural curl pattern │
  • │ • Best for: Sleek, smooth blowouts│ │ • Best for: Curly, coily, waves │
  • └───────────────────────────────────┘ └───────────────────────────────────┘
  • Styling Brush Classifications

Brush Type Physical Design & Bristles Primary Clinical Function

Classic Styling Brush Half-round rubber base with 7 or 9 rows of smooth nylon pins. Perfect for smoothing, shaping, and beveling ends during blow-drying. Heat-resistant and antistatic.

Paddle Brush Large, flat rectangular cushion base with ball-tipped nylon pins. Ideal for detangling, smoothing, and flattening medium-to-long hair. Eliminates unwanted wave formation.

Grooming Brush Oval brush with natural boar bristles or nylon/boar blends. Natural bristles distribute sebum along the entire hair shaft, adding natural shine and polishing updos.

Vent Brush Open, ventilated back allowing air to pass through freely. Speeds up drying time by allowing airflow to reach the base; adds root lift and natural texture.

Round Brushes Cylindrical barrel (wood, metal, or ceramic) with nylon or boar bristles. Creates volume, root lift, curls, and waves. Small barrels create tight curls; large barrels straighten and bevel.

3. Blow-Dry Technique

Consult, analyse and drape. Neck strip, cape, towel.

Detangle dry, then shampoo and condition per Chapter 7, and towel-blot without rubbing.

Apply product before drying, not after — heat protectant always, plus mousse, cream or lotion according to the analysis.

Rough dry to about 70–80%. Attempting to style soaking hair wastes time and overworks the hair.

Section the head — nape, sides, crown, top — and clip the sections you are not working on. Random drying is not acceptable ; the practical examination says so explicitly.

Work in subsections no deeper than the brush diameter , so the airflow reaches the whole subsection.

Point the nozzle down the hair shaft , from root to end, following the brush. Directing air against the cuticle lifts it and creates frizz.

Keep the nozzle moving and about two inches from the hair. A stationary hot nozzle burns the scalp and scorches the hair.

Dry the root area first , lifting at the base for volume, then work down the length.

Hold the shape until it cools. The set happens on cooling, not on heating.

Use the cool shot on each finished subsection to set the hydrogen bonds.

Finish with the lightest product that holds the shape.

On the practical examination

The blow-dry procedure allots fifteen minutes to dry the top, from crown to front hairline, and one side section , using a round bristle brush of any size . The hair may be re-wet if the candidate chooses, but only sparingly and only with water — no products . A concentrator may be used but is not required. Sectioning clips should be used, and the hair must be dried in a uniform manner, under or up . The examination is explicit: random drying is not acceptable.

4. Heat Safety

Test the airflow temperature on your own hand before directing it at the client's scalp.

Never rest the dryer against the scalp , and keep it moving.

Watch the ears and nape — the two places clients get burned.

Reduce heat on fine, high-porosity or chemically compromised hair and rely on airflow rather than temperature.

Never use a dryer near water , and never with a damaged cord.

Clean the rear filter regularly; a blocked filter causes the element to overheat.

Store the dryer with the cord loose , not wrapped tightly around the handle, which fatigues the cord at the entry point.