Study guide

9.6 Thermal Curling and Flat Ironing

New York Cosmetology Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: New York Licensing Law & Professional Requirements

1.1 GBL Article 27, Scope of Practice & Who Must Be Licensed 1.2 Qualifying for Licensure: Age, 1,000 Hours, Health Certificate & the Temporary Licence 1.3 The Written and Practical Examinations: Format, Fees, Admittance & Results 1.4 Licence Term, Renewal, Lapse, Fees & Out-of-State Applicants 1.5 State and Federal Payroll and New York Sales Tax Requirements 1.6 Professional Ethics, Conduct & the Domestic Violence and Sexual Assault Awareness Requirement 1.7 Career Opportunities, Placement, Professional Organizations & Trade Shows

2 Chapter 2: Safety and Health — New York Salon Regulation

2.1 Salon Facilities, Plumbing and Nail-Salon Ventilation Standards 2.2 Business Licensing, Bonds, Mandatory Postings, Inspections and Penalties 2.3 OSHA Hazard Communication, Safety Data Sheets, Chemical Storage & Labelling 2.4 Hygienic Practices, Sanitary Dress, Towels and Linens

3 Chapter 3: Infection Control

3.1 Types, Classification, Growth and Reproduction of Infectious Organisms 3.2 Viruses, Fungi, Parasites and Modes of Transmission 3.3 Immunity and Body Defenses 3.4 Decontamination Levels, Physical and Chemical Agents 3.5 New York Implement Reprocessing and Prohibited Items (§§ 160.17, 160.18) 3.6 Blood, Body Fluids and Client Contact Procedures (§ 160.19)

4 Chapter 4: Anatomy, Physiology & Nutrition

4.1 Cells, Tissues, Organs and the Body Systems 4.2 Bones of the Head, Face, Neck, Arms, Hands, Legs and Feet 4.3 Muscles of the Head, Face, Neck, Arms and Legs 4.4 The Circulatory System and Blood Supply of the Head, Face and Neck 4.5 The Nervous System and the Cranial Nerves 4.6 Basic Principles of Nutrition

5 Chapter 5: Chemistry as Applied to Cosmetology

5.1 Matter, Elements, Compounds, Mixtures and Chemical Reactions 5.2 Solutions, Suspensions, Emulsions and Oxidation-Reduction Reactions 5.3 The pH Scale and FDA Law Governing Hair Care Products

6 Chapter 6: Hair Analysis, Scalp and Hair Disorders

6.1 Hair Structure: Root, Shaft and the Three Layers 6.2 Chemical Composition, Side Bonds and Hair Pigment 6.3 Growth Cycles, Growth Patterns and Wave Patterns 6.4 Hair Analysis: Texture and Density 6.5 Porosity, Elasticity and Other Diagnostic Factors 6.6 Dandruff, Alopecia and Hair Shaft Disorders 6.7 Fungal Infections, Infestations and Bacterial Infections

7 Chapter 7: Shampoos, Rinses, Conditioners & Treatments

7.1 Client Preparation, Draping, Analysis and Consultation 7.2 Hair Analysis Instruments and Equipment 7.3 Shampoo, Rinse and Conditioner Products, Composition and Procedures 7.4 The Scalp, Manipulations and Treatments for Hair and Scalp Disorders

8 Chapter 8: Hair Cutting and Shaping

8.1 Fundamentals of Design: Reference Points, Lines and Sections 8.2 Elevation, Guidelines and Overdirection 8.3 Scissor Haircutting: Nomenclature, Care of Shears and Grip 8.4 Razor Haircutting, Clippers, Combs and Ergonomics 8.5 Scissor Techniques: Blunt, Graduated, Uniform and Long-Layered Cuts 8.6 Texturising, Clipper Cutting and Cross-Checking 8.7 Contemporary and Specialised Haircutting: Female, Male and Children's Styles 8.8 Shaving, Mustache and Beard Shaping

9 Chapter 9: Hair Styling

9.1 Wet Styling Science, Finger Waving and Skip Waving 9.2 Pin Curling 9.3 Roller Styling and Patterns in Hairstyling 9.4 Finishing Techniques 9.5 Tools, Implements and Blow-Dry Styling 9.6 Thermal Curling and Flat Ironing 9.7 Hair Pressing 9.8 Twisting, Wrapping, Weaving, Extending, Locking and Braiding 9.9 Hair Pieces, Wigs and Extensions

10 Chapter 10: Chemical Restructuring

10.1 The Chemistry of Chemical Restructuring 10.2 Chemical Restructuring Products and Processing Dynamics 10.3 Client Consultation and Preliminary Procedures for Chemical Services 10.4 Permanent Waving: Rods, Wrapping Techniques and Procedures 10.5 Chemical Relaxers: Products and Application 10.6 Curl Re-formation and Corrective Chemical Restructuring

11 Chapter 11: Hair Coloring and Lightening

11.1 Colour Theory and the Law of Colour 11.2 Tone, Intensity, the Level System and Underlying Pigment 11.3 Classifications of Haircolour: Temporary Through Permanent 11.4 Developer Chemistry, Vegetable Dyes and Metallic Salts 11.5 Client Consultation and Preliminary Procedures for Colour 11.6 Hair Lightening, Decolorisation and Toning 11.7 Special Effects: Foiling, Balayage and Dimensional Placement 11.8 Corrective Colour Procedures

12 Chapter 12: Nail Care and Procedures

12.1 Nail Structure, Growth, and Nail Shape and Colour Analysis 12.2 Nail Disorders and Diseases 12.3 Manicuring, Pedicuring and Manipulations of the Hand, Arm, Leg and Foot 12.4 Foot Spa Sanitation and New York's Prohibited Implements 12.5 Nail Tips, Wraps, Liquid and Powder Extensions and Gels

13 Chapter 13: Skin Care and Procedures

13.1 Structure and Function of the Skin 13.2 Skin Conditions and Disorders 13.3 Facial Procedures, Skin Analysis, Exfoliation and Enhancement Products 13.4 Temporary Methods of Hair Removal 13.5 Make-Up Application, Eyebrow Contouring and Lash Services

14 Chapter 14: The New York Practical Examination

14.1 Practical Exam Format, Scheduling, Admittance and Results 14.2 Work Area Setup, Mannequin Preparation and the Haircutting Procedure 14.3 Blow-Dry, Thermal Curling, Roller Placement, Perm Panel, Pin Curl Wave and Finger Wave 14.4 Chemical Service Simulations: Foiling, Haircolour Retouch and Relaxer

9.6 Thermal Curling and Flat Ironing

Key Takeaways Explain This Topic AI

The New York practical examination requires six curls with an electric marcel iron — three barrel curls on base on the top and three spiral curls on the dried side.

Stoves and spring-grip irons are not permitted on the New York practical examination; only an electric marcel iron may be used.

Thermal iron temperature is tested on a white tissue held for five seconds; scorching or browning means the iron is too hot.

A hard rubber or non-flammable comb is placed between the iron and the scalp to protect the client from burns.

Thermal services are not performed on hair that is wet, chemically compromised, or has been treated with a hydroxide relaxer without careful temperature reduction.

Last updated: August 2026

Thermal Curling and Flat Ironing

Exam Focus: The practical examination allots fifteen minutes for six curls — three barrel curls on base on the top of the head and three spiral curls on the side, with one of each demonstrated in the examiner's direct presence, and no products used. Learn the marcel iron parts, the tissue test, and the comb-shield rule, all of which are graded as well as examined.

1. Thermal Curling & Flat Iron Mechanics

Thermal styling tools utilize direct conductive heat to temporarily rearrange hydrogen and salt bonds within the hair cortex.

Anatomy of Thermal Irons

Marcel Curling Iron: Consists of four fundamental components:

Rod Barrel (Cylinder): The round heating element around which the hair is wrapped.

Shell (Groove / Clamp): The curved clamp that presses the hair against the rod barrel.

Rod Handle: Connected to the barrel; held in the palm.

Shell Handle: Connected to the clamp; manipulated with the fingers to open and close the shell.

Flat Irons: Feature two flat, heated plates (typically ranging from 1/2 inch to 2 inches in width). Plates are composed of ceramic, tourmaline (which emits negative ions to neutralize static), or titanium (which conducts high heat rapidly and evenly). ┌─────────────────────────────────────────────────────────────┐

  • │ MARCEL CURLING IRON ANATOMY │
  • └─────────────────────────────────────────────────────────────┘
  • Shell (Groove/Clamp) Rod Barrel (Cylinder)
  • ╭───────────────────╮ ╭─────────────────────╮
  • │ │ │ │
  • ══════╧═══════════════════╧════╪═════════════════════╪══════
  • [Pivot] │ │
  • │ ╰─────────────────────╯
  • ╱ ╲
  • ╱ ╲ Shell Handle (Manipulated by fingers)
  • │ │
  • │ │ Rod Handle (Held firmly in palm)
  • Testing Thermal Iron Temperature (The 5-Second White Tissue Rule)

Critical Board Safety Standard: Thermal irons must NEVER be applied directly to a client's hair without first verifying the operating temperature. ┌─────────────────────────────────────────────────────────────────────────────┐

  • │ MANDATORY TEMPERATURE TEST PROTOCOL │
  • ├─────────────────────────────────────────────────────────────────────────────┤
  • │ 1. Clamp heated iron onto a piece of WHITE TISSUE PAPER or END PAPER. │
  • │ 2. Hold the iron clamped firmly for EXACTLY 5 SECONDS. │
  • │ 3. Release and inspect the paper: │
  • │ • If paper scorches, turns yellow, or browns: Iron is TOO HOT! │
  • │ • Cool iron by resting on a heat-resistant stand before proceeding. │
  • │ • If paper remains clean and white: Temperature is safe for use. │
  • └─────────────────────────────────────────────────────────────────────────────┘
  • Thermal Heat Guidelines by Hair Texture

Fine, Bleached, or Chemically Damaged Hair: Requires mild heat ( 250°F – 300°F ). High temperatures will melt, scorch, or break fragile keratin fibers.

Normal, Medium Hair: Moderate heat ( 300°F – 350°F ).

Coarse, Thick, or Resistant Hair: Higher heat ( 350°F – 400°F+ ) with firm, consistent tension.

  • 2. Thermal Iron Manipulation & Safety Protocols
  • Iron Manipulation Techniques

Comb Placement for Scalp Protection: When executing thermal curling or straightening near the scalp, the cosmetologist must always place a hard rubber or nonflammable styling comb between the hot iron and the client's scalp . Never use celluloid or plastic combs, which melt or ignite under heat.

Manipulating the Marcel Iron: The rod handle rests in the palm of the dominant hand, while the little finger and ring finger open and close the shell handle. Rolling the barrel smoothly while clicking the shell feeds hair evenly onto the heated rod without crimping the ends ("fishhooks").

Types of Thermal Curls

End Curls: Created by clamping the ends of the hair and rolling half a turn under or upward. Gives finished shape to blunt cuts.

Spiral Curls: Created by winding hair diagonally along the length of the rod barrel. Produces hanging, vertical corkscrew curls.

Volume Base Curls: Achieved by overdirecting the strand at 135° and curling close to the base for root elevation.

Off-Base Thermal Curls: Achieved by holding the strand at 45° below perpendicular, producing smooth movement with minimal base lift.

3. Thermal Curling on the New York Practical Examination

The examination is specific, and candidates lose marks by improvising.

  • Requirement Detail
  • Time 15 minutes
  • Tool Electric marcel iron only — "no stoves or spring grips will be allowed"
  • Total curls Six

Barrel curls Three, on base , on the top of the head, made from scalp to end with manipulation of the iron, then clipped and left to cool

  • Spiral curls Three , on the dried side of the head, from scalp to end , vertical and not clipped
  • Examiner presence One of each type must be demonstrated in the examiner's direct presence
  • Products None may be used for this procedure
  • Afterward Unplug the iron, wrap it in a towel or cover it, pack it away, and set out roller supplies

Note the sequencing: the thermal curling procedure follows the blow-dry, and it is performed on the section the candidate has just dried. The examination also instructs the candidate to plug in and turn on the marcel iron at the end of the blow-dry procedure, so it is at temperature when the thermal segment begins.

4. Flat Ironing

The flat iron works on the same principle as the marcel iron — heat breaks hydrogen bonds, the plates hold the hair in a new configuration, and the bonds re-form as the hair cools — but with flat plates rather than a rod and shell.

  • Point Guidance
  • Hair must be completely dry Ironing damp hair boils water inside the shaft and causes bubble hair and breakage
  • Heat protectant always Applied before drying, not on the dry hair immediately before the plates

Section small Quarter- to half-inch subsections; a thick subsection needs multiple passes, which is where damage accumulates

One pass where possible Repeated passes multiply cumulative damage

Temperature by texture Lower for fine, high-porosity, colour-treated or chemically relaxed hair; higher for coarse, resistant hair

  • Keep moving A stationary iron scorches
  • Comb-shield the scalp The same protection rule as marcel work
  • Rest the iron safely On a heat-proof mat, never on a towel, never on the trolley surface
  • Recognising heat damage

Heat damage presents as dryness, loss of elasticity, a rough feel, loss of natural curl definition in curly hair, and — in severe cases — bubble hair , small nodules along the shaft caused by water vaporising inside the cortex. There is no repair. The professional response is to reduce heat use, use protectant, alternate protein and moisture conditioning per Chapter 7, and cut off the worst.

Heat and chemical services together compound. Hair that has been lightened, permed or relaxed has already had its cuticle lifted and its bonds altered; adding daily high-heat work is what turns a manageable service history into breakage. Record heat tool use on the client card alongside chemical history.