Study guide
2.1 Salon Facilities, Plumbing and Nail-Salon Ventilation Standards
New York Cosmetology Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: New York Licensing Law & Professional Requirements
1.1 GBL Article 27, Scope of Practice & Who Must Be Licensed 1.2 Qualifying for Licensure: Age, 1,000 Hours, Health Certificate & the Temporary Licence 1.3 The Written and Practical Examinations: Format, Fees, Admittance & Results 1.4 Licence Term, Renewal, Lapse, Fees & Out-of-State Applicants 1.5 State and Federal Payroll and New York Sales Tax Requirements 1.6 Professional Ethics, Conduct & the Domestic Violence and Sexual Assault Awareness Requirement 1.7 Career Opportunities, Placement, Professional Organizations & Trade Shows
2 Chapter 2: Safety and Health — New York Salon Regulation
2.1 Salon Facilities, Plumbing and Nail-Salon Ventilation Standards 2.2 Business Licensing, Bonds, Mandatory Postings, Inspections and Penalties 2.3 OSHA Hazard Communication, Safety Data Sheets, Chemical Storage & Labelling 2.4 Hygienic Practices, Sanitary Dress, Towels and Linens
3 Chapter 3: Infection Control
3.1 Types, Classification, Growth and Reproduction of Infectious Organisms 3.2 Viruses, Fungi, Parasites and Modes of Transmission 3.3 Immunity and Body Defenses 3.4 Decontamination Levels, Physical and Chemical Agents 3.5 New York Implement Reprocessing and Prohibited Items (§§ 160.17, 160.18) 3.6 Blood, Body Fluids and Client Contact Procedures (§ 160.19)
4 Chapter 4: Anatomy, Physiology & Nutrition
4.1 Cells, Tissues, Organs and the Body Systems 4.2 Bones of the Head, Face, Neck, Arms, Hands, Legs and Feet 4.3 Muscles of the Head, Face, Neck, Arms and Legs 4.4 The Circulatory System and Blood Supply of the Head, Face and Neck 4.5 The Nervous System and the Cranial Nerves 4.6 Basic Principles of Nutrition
5 Chapter 5: Chemistry as Applied to Cosmetology
5.1 Matter, Elements, Compounds, Mixtures and Chemical Reactions 5.2 Solutions, Suspensions, Emulsions and Oxidation-Reduction Reactions 5.3 The pH Scale and FDA Law Governing Hair Care Products
6 Chapter 6: Hair Analysis, Scalp and Hair Disorders
6.1 Hair Structure: Root, Shaft and the Three Layers 6.2 Chemical Composition, Side Bonds and Hair Pigment 6.3 Growth Cycles, Growth Patterns and Wave Patterns 6.4 Hair Analysis: Texture and Density 6.5 Porosity, Elasticity and Other Diagnostic Factors 6.6 Dandruff, Alopecia and Hair Shaft Disorders 6.7 Fungal Infections, Infestations and Bacterial Infections
7 Chapter 7: Shampoos, Rinses, Conditioners & Treatments
7.1 Client Preparation, Draping, Analysis and Consultation 7.2 Hair Analysis Instruments and Equipment 7.3 Shampoo, Rinse and Conditioner Products, Composition and Procedures 7.4 The Scalp, Manipulations and Treatments for Hair and Scalp Disorders
8 Chapter 8: Hair Cutting and Shaping
8.1 Fundamentals of Design: Reference Points, Lines and Sections 8.2 Elevation, Guidelines and Overdirection 8.3 Scissor Haircutting: Nomenclature, Care of Shears and Grip 8.4 Razor Haircutting, Clippers, Combs and Ergonomics 8.5 Scissor Techniques: Blunt, Graduated, Uniform and Long-Layered Cuts 8.6 Texturising, Clipper Cutting and Cross-Checking 8.7 Contemporary and Specialised Haircutting: Female, Male and Children's Styles 8.8 Shaving, Mustache and Beard Shaping
9 Chapter 9: Hair Styling
9.1 Wet Styling Science, Finger Waving and Skip Waving 9.2 Pin Curling 9.3 Roller Styling and Patterns in Hairstyling 9.4 Finishing Techniques 9.5 Tools, Implements and Blow-Dry Styling 9.6 Thermal Curling and Flat Ironing 9.7 Hair Pressing 9.8 Twisting, Wrapping, Weaving, Extending, Locking and Braiding 9.9 Hair Pieces, Wigs and Extensions
10 Chapter 10: Chemical Restructuring
10.1 The Chemistry of Chemical Restructuring 10.2 Chemical Restructuring Products and Processing Dynamics 10.3 Client Consultation and Preliminary Procedures for Chemical Services 10.4 Permanent Waving: Rods, Wrapping Techniques and Procedures 10.5 Chemical Relaxers: Products and Application 10.6 Curl Re-formation and Corrective Chemical Restructuring
11 Chapter 11: Hair Coloring and Lightening
11.1 Colour Theory and the Law of Colour 11.2 Tone, Intensity, the Level System and Underlying Pigment 11.3 Classifications of Haircolour: Temporary Through Permanent 11.4 Developer Chemistry, Vegetable Dyes and Metallic Salts 11.5 Client Consultation and Preliminary Procedures for Colour 11.6 Hair Lightening, Decolorisation and Toning 11.7 Special Effects: Foiling, Balayage and Dimensional Placement 11.8 Corrective Colour Procedures
12 Chapter 12: Nail Care and Procedures
12.1 Nail Structure, Growth, and Nail Shape and Colour Analysis 12.2 Nail Disorders and Diseases 12.3 Manicuring, Pedicuring and Manipulations of the Hand, Arm, Leg and Foot 12.4 Foot Spa Sanitation and New York's Prohibited Implements 12.5 Nail Tips, Wraps, Liquid and Powder Extensions and Gels
13 Chapter 13: Skin Care and Procedures
13.1 Structure and Function of the Skin 13.2 Skin Conditions and Disorders 13.3 Facial Procedures, Skin Analysis, Exfoliation and Enhancement Products 13.4 Temporary Methods of Hair Removal 13.5 Make-Up Application, Eyebrow Contouring and Lash Services
14 Chapter 14: The New York Practical Examination
14.1 Practical Exam Format, Scheduling, Admittance and Results 14.2 Work Area Setup, Mannequin Preparation and the Haircutting Procedure 14.3 Blow-Dry, Thermal Curling, Roller Placement, Perm Panel, Pin Curl Wave and Finger Wave 14.4 Chemical Service Simulations: Foiling, Haircolour Retouch and Relaxer
2.1 Salon Facilities, Plumbing and Nail-Salon Ventilation Standards
Key Takeaways Explain This Topic AI
19 NYCRR § 160.22 requires ceilings, walls, baseboards, shelves, furniture and floors to be kept clean, free of dust, dirt and hair, and in good repair.
Acceptable salon floor coverings under § 160.22(c) are cement, tile, hardwood, linoleum, vinyl or low-nap carpeting.
§ 160.16(b) requires hot and cold running water, toilet facilities and wash basins, adequate illumination, covered waste containers and sufficient working space in every appearance enhancement business.
Nail salons must exhaust at least 50 cubic feet per minute per nail station, or the 2015 International Mechanical Code rate — whichever is greater — under § 160.16(b)(6).
§ 160.12 prohibits open sources of ignition, flame or sparks, including candles, gas burners and cigarettes, anywhere products or chemicals are used.
Last updated: August 2026
Salon Facilities, Plumbing and Nail-Salon Ventilation
Exam Focus: The written exam draws facility items straight from 19 NYCRR §§ 160.16 and 160.22. Memorise the six universal facility requirements, the list of acceptable floor coverings, the 50 cfm per-station nail ventilation floor, the 12-inch source-capture rule, and the fact that ventilation must run whenever the nail salon is occupied — not merely when services are underway.
1. Universal Facility Requirements
19 NYCRR § 160.16(b) requires that, on top of the State Uniform Fire Prevention and Building Code, the New York City Construction Code, the State Sanitary Code and the State Industrial Code, every appearance enhancement business provide:
- Hot and cold running water
- Toilet facilities and wash basins for clients and employees
- Illumination sufficient for the safe provision of licensed services
- Covered containers for hair, paper and other waste material
- Sufficient space or working area to ensure the safety and health of both operator and client
- In a nail salon, a mechanical ventilation system meeting § 160.16(b)(6)
- 2. Sanitary Facilities Under § 160.22
The facility "shall be kept clean and in good repair" and "dangerous conditions or hazards shall not be permitted." The regulation then gets specific:
Element Requirement
Ceilings, walls, baseboards Maintained in good repair, free of dust, dirt and hair. Cracks, holes and other openings must be filled in; broken ceilings repaired; cracks around baseboards filled
Shelves, furniture, fixtures Clean, free of dust, dirt and hair, in good working condition
Floors Clean and in good repair, with no accumulation of dust or hair. Acceptable coverings: cement, tile, hardwood, linoleum, vinyl or low-nap carpeting. Composition floors swept daily
Plumbing fixtures Toilets and wash basins of impervious material, kept clean, free from cracks and from parts not readily accessible for cleaning, compliant with State or local codes
Stations Styling stations, working stations and manicure tables sanitised and cleaned between each client service
Hand washing Available in all lavatories, with disposable paper towels or hot air dryers. Cloth reusable hand towels are prohibited unless a clean towel is provided for each person
Deep-nap carpeting is the answer candidates most often miss. It is not on the acceptable list because it traps hair and chemical dust and cannot be properly cleaned.
3. Food, Beverages and Ignition Sources
§ 160.23 — food and beverages may not be prepared, kept or sold on the licensed premises. Two exceptions: foodstuffs prepared or kept in a separate, adequately ventilated room with fumes exhausted away from the public area, and beverages kept in covered containers .
§ 160.12 — open sources of ignition, flame or sparks, including candles, gas burners and cigarettes , are prohibited, so that products or chemicals are not inadvertently ignited. Owners, managers and individual operators are all responsible for compliance. An owner may designate a smoking area for employees and clients, but it must be separated from the operational areas and properly ventilated. Given the flammability of aerosols, alcohol-based products and acetone, this is a live safety rule, not a formality.
4. Nail Salon Mechanical Ventilation — § 160.16(b)(6)
New York's nail-salon ventilation rule is engineered and specific. Note the citation carefully: it is § 160.16(b)(6) , part of "Facilities: ancillary provisions". It is not § 160.28, which is the photograph requirement.
The system must comply with the 2015 International Mechanical Code (IMC) as amended by the NYS 2016 Uniform Code Supplement, and must:
Supply outdoor air at not less than the greater of (a) the nail-salon ventilation standards in Sections 401 and 403 of the 2015 IMC , or (b) 50 cubic feet per minute (cfm) for each nail station .
Include a mechanical exhaust system designed and constructed to capture all chemical vapours, fumes, dust and other air contaminants at their source and exhaust them to the outdoor atmosphere.
Provide at least one exhaust inlet for each nail station , factory-installed by the station manufacturer or field-installed not more than 12 inches horizontally and not more than 12 inches vertically from the point of chemical application or where the client's nails are placed.
Exhaust at not less than the greater of the 2015 IMC rate or 50 cfm per nail station .
Discharge exhaust where it will not cause a nuisance and cannot be drawn back in by the outdoor air intakes.
Never recirculate exhaust air into the nail salon, into any other space in the building, or transfer it to another space.
Be balanced so that outdoor air is supplied at a rate equal to the exhaust rate.
Operate at or above those minimum rates at all times when the nail salon is occupied by any person — not merely while services are being performed.
A " nail station " is defined in § 160.16(a)(4) as a table or work area where a nail specialty service is performed; where more than one service can be performed at a table at the same time, each portion counts as a separate station — and therefore requires its own exhaust inlet and its own 50 cfm.
Compliance dates. Any nail salon obtaining a new business licence on or after 3 October 2016 had to meet these specifications immediately; salons licensed before that date had until 3 October 2021 . A signed certification from the installer, manufacturer or a registered design professional — a New York registered architect or licensed professional engineer — must be kept on the premises and made available to the Department on inspection.
Nothing in the rule overrides a higher or more restrictive standard from the building, fire, sanitary or environmental codes.
5. Respiratory and Eye Protection
§ 160.20 requires the owner to provide protective equipment for practitioners:
A properly fitted N-95 or N-100 respirator approved by NIOSH , used in accordance with the manufacturer's specifications, when buffing or filing artificial nails or using acrylic powder .
Gloves , when handling potentially hazardous chemicals or waste, during clean-up, or when performing any procedure that risks breaking a client's skin.
Eye protection , when pouring or transferring potentially hazardous chemicals from bulk containers and when preparing hazardous chemicals for nail care services.
The regulation phrases these as equipment practitioners "shall have access to and may use". The duty to supply sits with the owner; the decision to wear sits with the practitioner, except where another rule — such as the mandatory gloves for waxing in § 160.20(k) — makes it compulsory.