Study guide

6.4 Comparing and Combining Functions Across Representations

New York Regents Algebra II Exam

Track your progress as you read

Finished sections get a check mark.

1 Chapter 1: Regents Exam Format, Scoring & Reference Guide

1.1 Regents Exam Format, Parts, and Score Conversion 1.2 The Next Generation Reference Sheet, Calculator Rules & Pacing

2 Chapter 2: Number and Quantity: Complex Numbers & Exponents

2.1 Rational Exponents and Radicals 2.2 The Complex Number System and Operations 2.3 Complex Solutions of Quadratic Equations

3 Chapter 3: Polynomial Arithmetic & Structure

3.1 Polynomial Structure and Factoring Techniques 3.2 Factoring Cubes, Polynomial Identities, and Binomial Expansions 3.3 Polynomial Division and the Remainder Theorem

4 Chapter 4: Solving Polynomial & Radical Equations

4.1 Zeros, Roots, and Graphing of Polynomial Functions 4.2 Radical Equations and Extraneous Solutions 4.3 Linear-Quadratic Systems: Parabolas and Circles 4.4 Creating Equations from Context and Justifying Each Step 4.5 Graphical Solutions: Reading f(x) = g(x) and f(x) < g(x)

5 Chapter 5: Rational Expressions & Equations

5.1 Simplifying and Operating with Rational Expressions 5.2 Solving Rational Equations and Modeling 5.3 Rational Function Graphs, Asymptotes, and Discontinuities

6 Chapter 6: Function Fundamentals & Transformations

6.1 Function Notation, Domain, Range, and Composition 6.2 Key Features of Functions and Average Rate of Change 6.3 Function Transformations 6.4 Comparing and Combining Functions Across Representations

7 Chapter 7: Inverses, Exponentials & Logarithms

7.1 Inverse Functions and Domain Restrictions 7.2 Exponential Growth, Decay, and Continuous Compounding 7.3 Logarithmic Properties and Solving Exponential/Logarithmic Equations 7.4 Graphing Exponential, Logarithmic, and Cube Root Functions

8 Chapter 8: Sequences and Series

8.1 Arithmetic and Geometric Sequences 8.2 Summation and Finite Series Formulas 8.3 Applications of Series: Financial Models and Annuities

9 Chapter 9: Trigonometric Functions

9.1 Radian Measure, Arc Length, and the Unit Circle 9.2 Graphs of Sine and Cosine & Sinusoidal Modeling 9.3 Trigonometric Identities and Equations

10 Chapter 10: Quantitative Data & Normal Distributions

10.1 The Normal Distribution, Empirical Rule, and Z-Scores 10.2 Bivariate Data, Scatterplots, and Regression Models 10.3 Residuals and Model Appropriateness 10.4 Judging Whether a Normal Model Fits and Choosing a Regression Model

11 Chapter 11: Statistical Inference & Probability

11.1 Statistical Studies: Surveys, Experiments, and Observational Studies 11.2 Sampling Variability, Simulation, and Margin of Error 11.3 Conditional Probability, Two-Way Tables, and Independence 11.4 Compound Events, Rules of Probability, and Expected Value

6.4 Comparing and Combining Functions Across Representations

Key Takeaways Explain This Topic AI

Standard AII-F.IF.9 asks students to compare properties of two functions presented in different ways - algebraically, graphically, numerically in a table, or by a verbal description - and NYSED extends the families to include square root and cube root functions alongside polynomial, exponential, logarithmic, and trigonometric ones.

The reliable protocol is to name the property, extract that one property from each representation using the method appropriate to that representation, and only then compare; never convert every representation into an equation first.

A table of equally spaced inputs identifies its family through differences and ratios: constant first differences signal linear, constant second differences signal quadratic, and a constant ratio signals exponential.

Standard AII-F.BF.1b requires combining standard function types using arithmetic operations, so a profit model is a revenue function minus a cost function and inherits the domain restrictions of both.

When two functions are compared over an interval rather than at a point, the fair comparison statistic is the average rate of change [f(b) - f(a)]/(b - a) evaluated on the same interval for both.

Last updated: September 2026

6.4 Comparing and Combining Functions Across Representations

Note

Regents Standard Alignment : AII-F.IF.9 - compare properties of two functions each represented in a different way (algebraically, graphically, numerically in tables, or by verbal descriptions). NYSED's Algebra II note widens the families: "Tasks also involve square root and cube root functions, in addition to polynomial, exponential, logarithmic and trigonometric functions." AII-F.BF.1b - combine standard function types using arithmetic operations.

Every F-IF.9 item has the same shape. You are handed two functions in two different formats and asked which one has the greater something . The format asymmetry is the difficulty; the underlying comparison is usually easy once each property is extracted.

1. The Extraction Table

Do not convert everything into an equation. Pull the one property you need directly from whatever form you were given.

Property From an Equation From a Graph From a Table From a Verbal Description

y y y -intercept Evaluate f ( 0 ) f(0) f ( 0 ) Read where the curve crosses the vertical axis Read the row where x = 0 x = 0 x = 0 The stated "initial", "starting", or "at time zero" value

Zeros Solve f ( x ) = 0 f(x) = 0 f ( x ) = 0 Read the horizontal-axis crossings Find rows where the output is 0 0 0 or where the sign changes Stated "breaks even", "hits the ground", "runs out"

Maximum or minimum Vertex x = − b 2 a x = -\frac{b}{2a} x = − 2 a b ​ for a quadratic; otherwise 2nd TRACE -> max/min Read the peak or valley Find the largest or smallest listed output, checking symmetry around it Stated "peaks at", "the most it ever reaches"

Average rate of change on [ a , b ] [a,b] [ a , b ] f ( b ) − f ( a ) b − a \dfrac{f(b) - f(a)}{b - a} b − a f ( b ) − f ( a ) ​ Slope of the segment joining the two points Same quotient using two table rows Stated "increases by ... per ..."

End behavior Leading term for polynomials; base for exponentials Follow the arms Extend the trend of the last rows with caution Stated "levels off", "grows without bound"

Period / amplitude / midline P = 2 π ∣ B ∣ P = \frac{2\pi}{\vert B\vert} P = ∣ B ∣ 2 π ​ , ∣ A ∣ \vert A\vert ∣ A ∣ , y = D y = D y = D Crest-to-crest distance; half the crest-to-trough height; the average of the extremes Distance between repeated outputs; half the range Stated "every 12 hours", "swings between"

Fingerprinting a Table

For equally spaced inputs:

Constant first differences ⇒ \Rightarrow ⇒ linear .

Constant second differences ⇒ \Rightarrow ⇒ quadratic .

Constant ratio between consecutive outputs ⇒ \Rightarrow ⇒ exponential .

Neither pattern, but a curve that flattens as x x x grows and is defined only for x ≥ x \geq x ≥ some value ⇒ \Rightarrow ⇒ suspect a square root ; defined everywhere with an inflection ⇒ \Rightarrow ⇒ suspect a cube root .

2. Worked Comparison 1: Equation Versus Table

Problem: Function f f f is defined by f ( x ) = 2 x 2 − 8 x + 3 f(x) = 2x^2 - 8x + 3 f ( x ) = 2 x 2 − 8 x + 3 . Function g g g is given by the table below. Which function has the greater minimum value, and by how much?

  • x x x 0 1 2 3 4
  • g ( x ) g(x) g ( x ) 6 0 − 2 -2 − 2 0 6

Confirm the family of g g g . First differences: − 6 , − 2 , 2 , 6 -6, -2, 2, 6 − 6 , − 2 , 2 , 6 . Second differences: 4 , 4 , 4 4, 4, 4 4 , 4 , 4 . Constant second differences confirm a quadratic.

Minimum of g g g . The table is symmetric about x = 2 x = 2 x = 2 , where the output − 2 -2 − 2 is the smallest listed value and the outputs rise identically on both sides. The minimum value of g g g is − 2 -2 − 2 .

Minimum of f f f . For a quadratic in standard form the vertex sits at x = − b 2 a = − − 8 2 ( 2 ) = 2 x = -\dfrac{b}{2a} = -\dfrac{-8}{2(2)} = 2 x = − 2 a b ​ = − 2 ( 2 ) − 8 ​ = 2 . Then f ( 2 ) = 2 ( 4 ) − 8 ( 2 ) + 3 = 8 − 16 + 3 = − 5 f(2) = 2(4) - 8(2) + 3 = 8 - 16 + 3 = -5 f ( 2 ) = 2 ( 4 ) − 8 ( 2 ) + 3 = 8 − 16 + 3 = − 5 . Because a = 2 > 0 a = 2 > 0 a = 2 > 0 , this is a minimum.

Compare. − 2 > − 5 -2 > -5 − 2 > − 5 , so g g g has the greater minimum, by 3 units .

Warning

Both functions bottom out at x = 2 x = 2 x = 2 , which makes it tempting to say they are "the same." The question asks about the minimum value - an output - not its location . Confusing the two is the classic F-IF.9 deduction.

3. Worked Comparison 2: Verbal Versus Graph, Using Average Rate of Change

Problem: A biologist describes colony A A A verbally: it starts at 40 cells and triples every hour. Colony B B B is shown on a graph that passes through ( 0 , 400 ) (0, 400) ( 0 , 400 ) , ( 1 , 600 ) (1, 600) ( 1 , 600 ) , ( 2 , 800 ) (2, 800) ( 2 , 800 ) , and ( 3 , 1000 ) (3, 1000) ( 3 , 1000 ) . Over the interval from t = 0 t = 0 t = 0 to t = 3 t = 3 t = 3 hours, which colony has the greater average rate of change?

Model A A A from the description. Tripling per hour is exponential: A ( t ) = 40 ( 3 ) t A(t) = 40(3)^t A ( t ) = 40 ( 3 ) t . Then A ( 0 ) = 40 A(0) = 40 A ( 0 ) = 40 and A ( 3 ) = 40 ( 27 ) = 1080 A(3) = 40(27) = 1080 A ( 3 ) = 40 ( 27 ) = 1080 . AROC A = 1080 − 40 3 − 0 = 1040 3 ≈ 346.7 cells per hour \text{AROC}_A = \frac{1080 - 40}{3 - 0} = \frac{1040}{3} \approx 346.7 \text{ cells per hour} AROC A ​ = 3 − 0 1080 − 40 ​ = 3 1040 ​ ≈ 346.7 cells per hour

Read B B B from the graph. The listed points rise by a constant 200 per hour, so B B B is linear with B ( 0 ) = 400 B(0) = 400 B ( 0 ) = 400 and B ( 3 ) = 1000 B(3) = 1000 B ( 3 ) = 1000 . AROC B = 1000 − 400 3 − 0 = 600 3 = 200 cells per hour \text{AROC}_B = \frac{1000 - 400}{3 - 0} = \frac{600}{3} = 200 \text{ cells per hour} AROC B ​ = 3 − 0 1000 − 400 ​ = 3 600 ​ = 200 cells per hour

Compare. 346.7 > 200 346.7 > 200 346.7 > 200 , so colony A A A has the greater average rate of change over [ 0 , 3 ] [0, 3] [ 0 , 3 ] .

Interpret honestly. Colony B B B is far larger for the first two hours - A ( 1 ) = 120 A(1) = 120 A ( 1 ) = 120 against B ( 1 ) = 600 B(1) = 600 B ( 1 ) = 600 - and only overtakes B B B between t = 2 t = 2 t = 2 ( A = 360 A = 360 A = 360 , B = 800 B = 800 B = 800 ) and t = 3 t = 3 t = 3 ( A = 1080 A = 1080 A = 1080 , B = 1000 B = 1000 B = 1000 ). "Greater average rate of change on an interval" is not the same claim as "larger throughout."

4. Combining Functions with Arithmetic Operations (AII-F.BF.1b)

Standard AII-F.BF.1b asks you to build a new function from two standard types using + + + , − - − , × \times × , or ÷ \div ÷ . The workhorse example in context is profit. P ( x ) = R ( x ) − C ( x ) P(x) = R(x) - C(x) P ( x ) = R ( x ) − C ( x )

Worked Combination

Problem: A small manufacturer's weekly revenue in dollars from selling x x x units is R ( x ) = 120 x − 2 x 2 R(x) = 120x - 2x^2 R ( x ) = 120 x − 2 x 2 , and weekly cost is C ( x ) = 300 + 20 x C(x) = 300 + 20x C ( x ) = 300 + 20 x . Write the profit function, determine the profit at 10 units, and find the production level that maximizes profit.

Combine. P ( x ) = ( 120 x − 2 x 2 ) − ( 300 + 20 x ) = − 2 x 2 + 100 x − 300 P(x) = (120x - 2x^2) - (300 + 20x) = -2x^2 + 100x - 300 P ( x ) = ( 120 x − 2 x 2 ) − ( 300 + 20 x ) = − 2 x 2 + 100 x − 300 Distribute the subtraction across both terms of C ( x ) C(x) C ( x ) - dropping the sign on + 20 x +20x + 20 x is the single most common error here.

Evaluate at 10 units. P ( 10 ) = − 2 ( 100 ) + 100 ( 10 ) − 300 = − 200 + 1000 − 300 = 500 P(10) = -2(100) + 100(10) - 300 = -200 + 1000 - 300 = 500 P ( 10 ) = − 2 ( 100 ) + 100 ( 10 ) − 300 = − 200 + 1000 − 300 = 500 Weekly profit at 10 units is $ 500 \text{\textdollar}500 $ 500 .

Maximize. The profit function is a downward-opening parabola, so its maximum is at the vertex: x = − b 2 a = − 100 2 ( − 2 ) = 25 units x = -\frac{b}{2a} = -\frac{100}{2(-2)} = 25 \text{ units} x = − 2 a b ​ = − 2 ( − 2 ) 100 ​ = 25 units P ( 25 ) = − 2 ( 625 ) + 100 ( 25 ) − 300 = − 1250 + 2500 − 300 = 950 P(25) = -2(625) + 100(25) - 300 = -1250 + 2500 - 300 = 950 P ( 25 ) = − 2 ( 625 ) + 100 ( 25 ) − 300 = − 1250 + 2500 − 300 = 950 Maximum weekly profit is $ 950 \text{\textdollar}950 $ 950 at 25 units.

Rules a Combined Function Inherits

Operation Resulting Domain Watch For

( f + g ) ( x ) (f + g)(x) ( f + g ) ( x ) , ( f − g ) ( x ) (f - g)(x) ( f − g ) ( x ) , ( f ⋅ g ) ( x ) (f \cdot g)(x) ( f ⋅ g ) ( x ) The intersection of the domains of f f f and g g g A radical or logarithmic piece narrows the whole combined domain

( f g ) ( x ) \left(\dfrac{f}{g}\right)(x) ( g f ​ ) ( x ) The intersection, minus every x x x with g ( x ) = 0 g(x) = 0 g ( x ) = 0 Zeros of the denominator function are excluded even if f f f is fine there

For example, if f ( x ) = x − 1 f(x) = \sqrt{x - 1} f ( x ) = x − 1 ​ and g ( x ) = x − 4 g(x) = x - 4 g ( x ) = x − 4 , then ( f + g ) ( x ) = x − 1 + x − 4 (f + g)(x) = \sqrt{x - 1} + x - 4 ( f + g ) ( x ) = x − 1 ​ + x − 4 has domain [ 1 , ∞ ) [1, \infty) [ 1 , ∞ ) , while ( f g ) ( x ) \left(\frac{f}{g}\right)(x) ( g f ​ ) ( x ) has domain [ 1 , 4 ) ∪ ( 4 , ∞ ) [1, 4) \cup (4, \infty) [ 1 , 4 ) ∪ ( 4 , ∞ ) .