Study guide

6.3 Arc Length & Sector Area

Regents Examination in Geometry Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Strategy

1.1 How the Geometry Regents Works 1.2 The Regents Reference Sheet & Key Formulas 1.3 Writing Proofs & Constructed-Response Strategy

2 Congruence I: Foundations & Transformations

2.1 Points, Lines, Planes & Basic Notation 2.2 Angle Relationships with Parallel Lines 2.3 Triangle Angle Theorems 2.4 Rigid Motions & Transformations

3 Congruence II: Triangle & Quadrilateral Proofs

3.1 Triangle Congruence Criteria 3.2 Writing Triangle Congruence Proofs & CPCTC 3.3 Isosceles Triangles, Midsegments & Points of Concurrency 3.4 Properties & Proofs of Quadrilaterals

4 Similarity

4.1 Dilations & Scale Factor 4.2 Similarity Criteria (AA, SAS, SSS) 4.3 Similarity Proofs & Proportional Relationships 4.4 Right-Triangle Altitude & Geometric Mean

5 Right-Triangle Trigonometry

5.1 Pythagorean Theorem & Special Right Triangles 5.2 Trigonometric Ratios (SOH-CAH-TOA) 5.3 Solving Right Triangles & Angle of Elevation/Depression 5.4 Cofunctions & Trig Applications

6 Circles

6.1 Circle Vocabulary, Central & Inscribed Angles 6.2 Chords, Tangents & Secants 6.3 Arc Length & Sector Area 6.4 Equations of Circles & Completing the Square

7 Coordinate Geometry

7.1 Distance, Midpoint & Slope 7.2 Equations of Parallel & Perpendicular Lines 7.3 Partitioning a Directed Line Segment 7.4 Coordinate Proofs, Perimeter & Area

8 Measurement, Dimension & Modeling

8.1 Area & Volume Formulas 8.2 Cross-Sections & Solids of Revolution 8.3 Density & Design Modeling 8.4 Optimization & Real-World Geometry

6.3 Arc Length & Sector Area

Key Takeaways Explain This Topic AI

Arc length = (theta/360)(2)(pi)(r) and sector area = (theta/360)(pi)(r squared) with theta in degrees.

An arc is the same fraction of the circumference that its central angle is of 360 degrees.

Radian measure is arc length divided by radius; a full circle is 2(pi) radians = 360 degrees.

Convert degrees to radians by multiplying by (pi)/180, and radians to degrees by multiplying by 180/(pi).

NYSED emphasizes degree-based proportionality on the Geometry Regents; deeper radian work is in Algebra II.

Last updated: July 2026

Arc Length and Sector Area by Proportion

Standard GEO-G.C.5 asks you to find one of the central angle, arc length, radius, or sector area given the others. The unifying idea is proportionality : an arc is the same fraction of the circumference that its central angle is of 360 degrees, and a sector is the same fraction of the circle's area.

  • Arc length = (theta / 360)(2)(pi)(r)
  • Sector area = (theta / 360)(pi)(r squared)

Here theta is the central angle in degrees. Both formulas are just "the fraction of the circle" (theta / 360) times the whole circumference or the whole area. Because the same fraction controls both quantities, you can set up arc / circumference = sector / area = theta / 360 and solve for whatever is missing.

Worked Examples in Degrees

Arc length. A circle has radius 10 and a 90-degree central angle. Since 90/360 = 1/4 and the circumference is 2(pi)(10) = 20(pi), the arc length is one fourth of 20(pi), or 5(pi) .

Sector area (simple fraction). A sector has radius 6 and central angle 60 degrees. Because 60/360 = 1/6 and the full area is (pi)(6 squared) = 36(pi), the sector area is 36(pi)/6 = 6(pi) .

Sector area (larger angle). A sector has radius 8 and central angle 135 degrees. Here 135/360 = 3/8 and the full area is (pi)(8 squared) = 64(pi), so the sector area is (3/8)(64(pi)) = 24(pi) .

Working backward for the angle. If an arc length is 10(pi) on a circle of radius 12, then 10(pi) = (theta/360)(24(pi)). Dividing, theta/360 = 10/24 = 5/12, so theta = 150 degrees .

Working backward for the radius. Suppose a 60-degree sector has area 6(pi). Then 6(pi) = (60/360)(pi)(r squared) = (1/6)(pi)(r squared). Multiplying both sides by 6 and dividing by (pi) gives r squared = 36, so the radius is 6 . The single proportion theta / 360 lets you solve for angle, arc, radius, or area interchangeably.

Real-world modeling. These formulas power the modeling questions (8-15% of the exam). Arc length measures a curved edge such as the crust of a pizza slice or a lane on a curved track; sector area measures a wedge such as a slice of pie, a windshield-wiper sweep, or the ground watered by a rotating sprinkler. If a sprinkler waters a 90-degree wedge of radius 20 feet, the watered area is (90/360)(pi)(20 squared) = 100(pi) square feet.

Finding the angle from two measurements. A pie of radius 9 inches is cut so that one slice has an arc-length (crust) of 3(pi) inches. Then 3(pi) = (theta/360)(2)(pi)(9) = (theta/360)(18(pi)). Dividing gives theta/360 = 3/18 = 1/6, so the slice spans 60 degrees . Notice you never needed a decimal for (pi); it cancels because both sides carry the same factor.

Radian Measure

The Next Generation standard also defines radian measure . The length of the arc intercepted by a central angle is proportional to the radius, and the radian measure is that constant of proportionality : radians = arc length / radius. A full circle is 2(pi) radians = 360 degrees , so a half circle is (pi) radians and a quarter circle is (pi)/2 radians.

Convert between the two systems with these rules:

Degrees to radians: multiply by (pi)/180. Example: 60 degrees = 60 * (pi)/180 = (pi)/3 radians .

Radians to degrees: multiply by 180/(pi). Example: (pi)/4 radians = (pi)/4 * 180/(pi) = 45 degrees .

  • Degrees 30 45 60 90 180 360
  • Radians (pi)/6 (pi)/4 (pi)/3 (pi)/2 (pi) 2(pi)

In radians the formulas streamline to arc length = r(theta) and sector area = (1/2)r squared (theta) , with theta in radians. For instance, a central angle of (pi)/2 radians on a circle of radius 10 gives arc length = 10 * (pi)/2 = 5(pi), the same 5(pi) you get from the degree formula with 90 degrees. The two systems always agree because a radian is defined precisely so that arc length equals radius times angle.

A New York Scope Note

NYSED clarifies that on the Geometry Regents the emphasis is proportional reasoning in degrees , with the whole circle as 360 degrees; radians are defined as the constant of proportionality here, and the deeper radian work is developed in Algebra II . So for the Geometry exam, expect the degree-based proportion (theta/360) to do most of the lifting, while still knowing what a radian is and how to convert. In practice, if a problem gives you an angle in degrees, work in degrees; only convert to radians if the problem itself uses radian notation.

Common Traps

Arc length vs. sector area: arc length uses the circumference (2(pi)r); sector area uses the area ((pi)r squared). Don't swap them.

Exact vs. approximate: leave answers in terms of (pi) unless a problem explicitly says to round, and use the calculator's (pi) key when a decimal is required.

Degree/radian mix-up: r(theta) and (1/2)r squared (theta) require theta in radians , while the theta/360 forms require degrees .