Study guide

6.4 Equations of Circles & Completing the Square

Regents Examination in Geometry Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Strategy

1.1 How the Geometry Regents Works 1.2 The Regents Reference Sheet & Key Formulas 1.3 Writing Proofs & Constructed-Response Strategy

2 Congruence I: Foundations & Transformations

2.1 Points, Lines, Planes & Basic Notation 2.2 Angle Relationships with Parallel Lines 2.3 Triangle Angle Theorems 2.4 Rigid Motions & Transformations

3 Congruence II: Triangle & Quadrilateral Proofs

3.1 Triangle Congruence Criteria 3.2 Writing Triangle Congruence Proofs & CPCTC 3.3 Isosceles Triangles, Midsegments & Points of Concurrency 3.4 Properties & Proofs of Quadrilaterals

4 Similarity

4.1 Dilations & Scale Factor 4.2 Similarity Criteria (AA, SAS, SSS) 4.3 Similarity Proofs & Proportional Relationships 4.4 Right-Triangle Altitude & Geometric Mean

5 Right-Triangle Trigonometry

5.1 Pythagorean Theorem & Special Right Triangles 5.2 Trigonometric Ratios (SOH-CAH-TOA) 5.3 Solving Right Triangles & Angle of Elevation/Depression 5.4 Cofunctions & Trig Applications

6 Circles

6.1 Circle Vocabulary, Central & Inscribed Angles 6.2 Chords, Tangents & Secants 6.3 Arc Length & Sector Area 6.4 Equations of Circles & Completing the Square

7 Coordinate Geometry

7.1 Distance, Midpoint & Slope 7.2 Equations of Parallel & Perpendicular Lines 7.3 Partitioning a Directed Line Segment 7.4 Coordinate Proofs, Perimeter & Area

8 Measurement, Dimension & Modeling

8.1 Area & Volume Formulas 8.2 Cross-Sections & Solids of Revolution 8.3 Density & Design Modeling 8.4 Optimization & Real-World Geometry

6.4 Equations of Circles & Completing the Square

Key Takeaways Explain This Topic AI

The standard equation of a circle is (x - h) squared + (y - k) squared = r squared, with center (h, k) and radius r.

Center coordinates take the opposite sign of the number inside each parenthesis; a center (3, -2) gives (x - 3) squared + (y + 2) squared.

The right side equals r squared, so the radius is its square root; r squared = 20 means r = 2 sqrt(5).

General form x squared + y squared + Dx + Ey + F = 0 converts to standard form by completing the square.

To complete the square, add the square of half each linear coefficient to BOTH sides, then factor.

Last updated: July 2026

The Standard Equation of a Circle

Standard GEO-G.GPE.1 requires you to derive and use the equation of a circle and to complete the square to recover its center and radius. Every point on a circle is the same distance r from the center (h, k). Applying the distance formula, sqrt((x - h) squared + (y - k) squared) = r, and squaring both sides (which is exactly the Pythagorean theorem applied to the horizontal and vertical legs) gives the standard form :

(x - h) squared + (y - k) squared = r squared

Here (h, k) is the center and r is the radius . A circle centered at the origin simplifies to x squared + y squared = r squared . Understanding that the equation is just "distance from center equals radius" is what lets you both write an equation and read one.

Reading Center and Radius

Two sign and square-root details cause most Regents errors here.

Signs flip. The equation subtracts the center coordinates, so a center of (3, -2) produces (x - 3) squared + (y + 2) squared = r squared . Read the opposite sign of what appears inside each parenthesis.

Radius is a square root. The right side is r squared , not r. If (x - 3) squared + (y + 2) squared = 25, then r squared = 25 and the radius is 5 . If x squared + y squared = 20, then r = sqrt(20) = 2 sqrt(5) .

  • Equation Center Radius
  • x squared + y squared = 49 (0, 0) 7
  • (x - 3) squared + (y + 2) squared = 25 (3, -2) 5
  • (x + 4) squared + (y - 5) squared = 25 (-4, 5) 5
  • Writing an Equation From a Graph

Read the center off the graph, count the radius to any point directly right, left, up, or down, then substitute. A circle centered at (-2, 5) with radius 3 gives (x + 2) squared + (y - 5) squared = 9 , because 3 squared = 9 and the center coordinates change sign inside the parentheses.

If the circle instead passes through a labeled point rather than showing the radius, use the distance formula between the center and that point to get r, or plug the point into the equation to solve for r squared. For example, a circle centered at (1, 2) that passes through (4, 6) has r = sqrt((4 - 1) squared + (6 - 2) squared) = sqrt(9 + 16) = 5, giving (x - 1) squared + (y - 2) squared = 25.

General Form and Completing the Square

An expanded circle appears in general form : x squared + y squared + Dx + Ey + F = 0 . To find the center and radius, convert it back to standard form by completing the square on the x-terms and the y-terms separately.

The procedure:

Group the x-terms together and the y-terms together, and move the constant to the right side.

For each group, take half of the linear coefficient, square it, and add that number to BOTH sides .

Factor each group into a perfect square, then read the center and radius.

Worked example 1. The equation x squared + y squared - 6x + 4y = 12 is a circle. Half of -6 is -3, squared is 9; half of 4 is 2, squared is 4. Add 9 and 4 to both sides:

(x squared - 6x + 9) + (y squared + 4y + 4) = 12 + 9 + 4, which factors to (x - 3) squared + (y + 2) squared = 25 . The center is (3, -2) and the radius is 5 .

Worked example 2. For x squared + y squared + 8x - 10y + 16 = 0, first move the 16: x squared + 8x + y squared - 10y = -16. Half of 8 squared is 16; half of -10 squared is 25. Add both to each side:

(x + 4) squared + (y - 5) squared = -16 + 16 + 25 = 25, so the center is (-4, 5) and the radius is 5 .

Checking That an Equation Is Really a Circle

After completing the square, the right side must be a positive number for a genuine circle. If the right side comes out to 0, the equation describes a single point (a degenerate circle of radius 0); if it is negative, no real graph exists. On the Regents you will almost always land on a positive r squared, but confirming the sign is a quick sanity check that your square-completing arithmetic is correct. Similarly, verify your center by substituting it back: the center coordinates should make each squared term equal 0.

Common Traps

Forgetting to balance both sides. Whatever you add to complete a square must be added to the right side too, or the radius will be wrong.

Sign of the center. (x + 4) squared means the x-coordinate of the center is -4 , not +4.

Radius vs. radius squared. The number on the right is r squared; take the square root to get the radius, and simplify radicals such as sqrt(20) = 2 sqrt(5).