Study guide
8.2 Cross-Sections & Solids of Revolution
Regents Examination in Geometry Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Exam Strategy
1.1 How the Geometry Regents Works 1.2 The Regents Reference Sheet & Key Formulas 1.3 Writing Proofs & Constructed-Response Strategy
2 Congruence I: Foundations & Transformations
2.1 Points, Lines, Planes & Basic Notation 2.2 Angle Relationships with Parallel Lines 2.3 Triangle Angle Theorems 2.4 Rigid Motions & Transformations
3 Congruence II: Triangle & Quadrilateral Proofs
3.1 Triangle Congruence Criteria 3.2 Writing Triangle Congruence Proofs & CPCTC 3.3 Isosceles Triangles, Midsegments & Points of Concurrency 3.4 Properties & Proofs of Quadrilaterals
4 Similarity
4.1 Dilations & Scale Factor 4.2 Similarity Criteria (AA, SAS, SSS) 4.3 Similarity Proofs & Proportional Relationships 4.4 Right-Triangle Altitude & Geometric Mean
5 Right-Triangle Trigonometry
5.1 Pythagorean Theorem & Special Right Triangles 5.2 Trigonometric Ratios (SOH-CAH-TOA) 5.3 Solving Right Triangles & Angle of Elevation/Depression 5.4 Cofunctions & Trig Applications
6 Circles
6.1 Circle Vocabulary, Central & Inscribed Angles 6.2 Chords, Tangents & Secants 6.3 Arc Length & Sector Area 6.4 Equations of Circles & Completing the Square
7 Coordinate Geometry
7.1 Distance, Midpoint & Slope 7.2 Equations of Parallel & Perpendicular Lines 7.3 Partitioning a Directed Line Segment 7.4 Coordinate Proofs, Perimeter & Area
8 Measurement, Dimension & Modeling
8.1 Area & Volume Formulas 8.2 Cross-Sections & Solids of Revolution 8.3 Density & Design Modeling 8.4 Optimization & Real-World Geometry
8.2 Cross-Sections & Solids of Revolution
Key Takeaways Explain This Topic AI
A cross-section parallel to a base reproduces the base shape: a cylinder sliced parallel to its base gives a circle congruent to the base.
Rotating a rectangle about a side gives a cylinder; a right triangle about a leg gives a cone; a semicircle about its diameter gives a sphere.
A 6-by-4 rectangle spun about the side of length 6 forms a cylinder with radius 4 and height 6, volume 96π.
Cavalieri's principle: solids with equal heights and equal-area cross-sections at every level have equal volume.
Standard GEO-G.GMD.4 tests moving both directions between 2D figures and 3D solids.
Last updated: July 2026
Slicing and Spinning: Two Ways 2D Meets 3D
Standard GEO-G.GMD.4 asks you to move between two and three dimensions in two directions: identify the cross-section you get when a plane slices a solid, and identify the solid of revolution you get when a flat figure spins around a line. These questions appear as quick multiple-choice items and inside Part II–IV modeling problems, so both directions are worth practicing.
Cross-Sections: Slicing a Solid
A cross-section is the two-dimensional shape formed where a plane cuts through a solid. The shape depends on the angle of the cut relative to the solid.
- Solid Cut parallel to base Cut perpendicular to base
- Cylinder circle (congruent to base) rectangle
- Rectangular prism rectangle congruent to base rectangle
- Cone circle (smaller than base) triangle (through apex)
- Square pyramid square similar to base triangle (through apex)
- Sphere circle (any cut) circle
Two ideas cover most exam questions. First, a slice parallel to the base reproduces the base shape: a cylinder cut parallel to its circular base yields a circle congruent to the base , and a rectangular prism cut parallel to its base yields a rectangle congruent to the base .
Second, a slanted or angled cut can produce a new shape — a cone cut parallel to its slant side produces a parabola , and an angled cut through a cylinder produces an ellipse. A sphere is the friendly case: every flat cut is a circle, and the largest possible one, through the center, is called a great circle. A cut through the apex of a cone or pyramid — perpendicular to the base — produces a triangle rather than a copy of the base.
Solids of Revolution: Spinning a Figure
Rotate a two-dimensional figure a full 360° about a straight line (the axis of rotation ) and it sweeps out a solid.
Rotate a rectangle about one side → a cylinder (the side on the axis is the height; the perpendicular side is the radius).
Rotate a right triangle about a leg → a cone (the leg on the axis is the height; the other leg is the radius).
Rotate a semicircle about its diameter → a sphere .
Worked example — cylinder. A 6-by-4 rectangle is rotated about the side of length 6. The side on the axis becomes the height (6) and the perpendicular side becomes the radius (4). So V = πr²h = π(4²)(6) = 96π . Had it spun about the side of length 4, the radius and height would swap, giving π(6²)(4) = 144π — a different solid, so read which side is the axis.
Worked example — cone. A right triangle with legs 5 and 12 is rotated about the leg of length 5. That leg is the height (5) and the other leg is the radius (12): V = ⅓π(12²)(5) = 240π . Rotating about the leg of 12 instead would give radius 5, height 12 — a completely different cone with volume ⅓π(5²)(12) = 100π. Always identify which segment lies on the axis : that length is the height, and the perpendicular distance from the axis to the farthest point is the radius.
Worked example — sphere. Rotating a semicircle of radius 6 about its diameter sweeps out a sphere of radius 6, so V = (4/3)π(6³) = (4/3)π(216) = 288π . If instead you rotate a full circle about a line beside it you get a torus (a donut), which is beyond the exam but shows how the axis choice controls the solid.
Cavalieri's Principle — Why the Formulas Work
Cavalieri's principle (GEO-G.GMD.1) states that if two solids have the same height and every parallel cross-section at the same level has equal area , then the two solids have equal volume . This is why an oblique (leaning) cylinder has the same volume as an upright cylinder with the same base and height, and why a slanted stack of coins holds the same volume as a straight stack. It also justifies V = Bh and V = ⅓Bh for oblique prisms, cylinders, cones, and pyramids: leaning a solid over does not change the area of any horizontal slice, so it does not change the volume.
Connecting the Two Directions
The two skills are inverses. Rotating a right triangle creates a cone; slicing that cone perpendicular through its apex returns a triangle. Being able to picture the slice or the spin lets you set up a volume formula even when a figure is described only in words.
One more pattern worth knowing: horizontal cross-sections of a pyramid or cone taken between the base and the apex are similar to the base but smaller, shrinking to a single point at the apex. That shrinking-similar-slice picture is exactly the informal dissection argument behind the ⅓ factor in V = ⅓Bh, tying this section back to the reference-sheet formulas. On the multiple-choice items, sketch the solid, mark the cutting plane or the axis, and name the resulting shape before checking the answer choices — a two-second drawing prevents the most common errors.