Study guide

4.1 Dilations & Scale Factor

Regents Examination in Geometry Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Strategy

1.1 How the Geometry Regents Works 1.2 The Regents Reference Sheet & Key Formulas 1.3 Writing Proofs & Constructed-Response Strategy

2 Congruence I: Foundations & Transformations

2.1 Points, Lines, Planes & Basic Notation 2.2 Angle Relationships with Parallel Lines 2.3 Triangle Angle Theorems 2.4 Rigid Motions & Transformations

3 Congruence II: Triangle & Quadrilateral Proofs

3.1 Triangle Congruence Criteria 3.2 Writing Triangle Congruence Proofs & CPCTC 3.3 Isosceles Triangles, Midsegments & Points of Concurrency 3.4 Properties & Proofs of Quadrilaterals

4 Similarity

4.1 Dilations & Scale Factor 4.2 Similarity Criteria (AA, SAS, SSS) 4.3 Similarity Proofs & Proportional Relationships 4.4 Right-Triangle Altitude & Geometric Mean

5 Right-Triangle Trigonometry

5.1 Pythagorean Theorem & Special Right Triangles 5.2 Trigonometric Ratios (SOH-CAH-TOA) 5.3 Solving Right Triangles & Angle of Elevation/Depression 5.4 Cofunctions & Trig Applications

6 Circles

6.1 Circle Vocabulary, Central & Inscribed Angles 6.2 Chords, Tangents & Secants 6.3 Arc Length & Sector Area 6.4 Equations of Circles & Completing the Square

7 Coordinate Geometry

7.1 Distance, Midpoint & Slope 7.2 Equations of Parallel & Perpendicular Lines 7.3 Partitioning a Directed Line Segment 7.4 Coordinate Proofs, Perimeter & Area

8 Measurement, Dimension & Modeling

8.1 Area & Volume Formulas 8.2 Cross-Sections & Solids of Revolution 8.3 Density & Design Modeling 8.4 Optimization & Real-World Geometry

4.1 Dilations & Scale Factor

Key Takeaways Explain This Topic AI

A dilation centered at the origin maps (x, y) to (kx, ky); off the origin, use P' = C + k(P - C).

Under scale factor k, length and perimeter scale by k, area scales by k squared, and volume scales by k cubed.

Dilations preserve angle measures and parallelism, so the image is always similar to the preimage.

k > 1 enlarges, 0 < k < 1 reduces, k = 1 is the identity, and k = -1 acts like a 180-degree rotation about the center.

The center of dilation is the only fixed point; C, P, and its image P' are always collinear.

Last updated: July 2026

What a Dilation Does

A dilation is a transformation that resizes a figure without changing its shape. Every dilation is defined by two things: a fixed center of dilation (a point) and a nonzero scale factor k . The dilation stretches or shrinks the figure away from, or toward, the center by the factor k .

Because shape is preserved but size can change, a dilation is a similarity transformation , not a rigid motion. It is the one transformation on the Geometry Regents that is allowed to change size.

New York's Next Generation standard G-SRT.A.1 asks you to verify the defining properties of a dilation, and G-SRT.A.2 and G-SRT.A.3 build similarity on top of it. Mastering dilations is therefore the gateway to the entire Similarity, Right Triangles, and Trigonometry domain, the largest block on the exam at 29-37%.

The Scale Factor k

The scale factor is a ratio: k = (image length) / (preimage length) . Its value tells you exactly what the dilation does.

  • Scale factor k Effect on the figure
  • k > 1 Enlargement, image is larger
  • k = 1 Identity, image equals preimage
  • 0 < k < 1 Reduction, image is smaller
  • k < 0 Image lands on the opposite side of the center, rotated 180 degrees

So k = 3 triples every length, k = 1/2 halves every length, and k = -2 doubles every length while flipping the figure through the center.

Dilations on the Coordinate Plane

Centered at the origin. When the center is the origin O(0, 0), a dilation with scale factor k is simply (x, y) -> (kx, ky): multiply both coordinates by k . A scale factor of 2 maps (3, -4) to (6, -8); a scale factor of 1/2 maps (8, 6) to (4, 3).

Centered at any point. When the center C is not the origin, you cannot just multiply the coordinates. Work with the vector from the center to the point:

P' = C + k(P - C)

In words: find the horizontal and vertical distance from C to P , multiply each by k , then add the result back to C .

Worked example. Dilate P(4, 0) about center C(1, -2) with k = 3.

Vector from C to P: (4 - 1, 0 - (-2)) = (3, 2).

Multiply by k = 3: (9, 6).

Add back to C: (1 + 9, -2 + 6) = (10, 4) .

So P' = (10, 4). Notice that C, P, and P' are collinear: every image point lies on the ray from the center through the original point.

What a Dilation Preserves and Changes

Keep a clean mental list of what a scale factor touches and what it leaves alone.

Angle measures: unchanged. Dilations preserve angles, which is why the image is similar to the preimage.

Parallelism and collinearity: unchanged. A line that does not pass through the center maps to a parallel line; a line through the center maps to itself.

Length: multiplied by |k|. Every segment, and therefore the perimeter , scales by k .

Area: multiplied by k^2. Because area is two-dimensional, doubling lengths (k = 2) quadruples area.

Orientation: preserved for k > 0 , reversed through the center for k < 0.

A frequent Regents trap asks how the perimeter changes under a dilation. Perimeter is a length, so it scales by k , not by k^2. Only area scales by k^2. For similar solids, volume scales by k^3, so memorize the k, k^2, k^3 ladder for length, area, and volume.

Reading the Scale Factor Backward

Many questions give you the image and preimage and ask for k . Divide a pair of corresponding lengths, image over preimage. If a 6-unit segment becomes 15 units, then k = 15/6 = 5/2. If a 20-unit figure becomes 8 units, k = 8/20 = 2/5, a reduction. Always put the new figure's length on top so that k > 1 signals enlargement and k < 1 signals reduction.

Negative and Fractional Scale Factors

A fractional scale factor (0 < k < 1) produces a reduction. With k = 2/3, a triangle with sides 9, 12, 15 becomes 6, 8, 10. A negative scale factor sends each point through the center to the opposite side. Dilating A(2, 4) about the origin with k = -1 gives (-2, -4), and with k = -2 gives (-4, -8). A dilation of k = -1 about the origin has the same effect as a 180-degree rotation about the origin, a link the exam sometimes uses to blur transformation types.

The Center Is the Only Fixed Point

For any k not equal to 1, the only point that maps to itself is the center of dilation, because its distance from the center is zero and zero times k is still zero. Every other point slides along the ray from the center. This is why locating the center matters: if a figure is dilated "about vertex A," then A stays fixed and you measure all scaling from A.