Study guide

Series, Parallel Circuits, and Power

New York Regents Physical Science: Physics Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Exam Format, Reference Tables, and Physics Reasoning

Exam Format, Scoring, and Reference Tables Cluster-Based Question Strategy Units, Graphs, and Significant Figures

2 Motion, Forces, Momentum, and Systems

Motion Graphs and Kinematics Vectors and Free-Body Diagrams Newton's Laws and Net Force Friction, Circular Motion, and Gravitation Momentum, Impulse, and Conservation

3 Energy, Power, and Thermal Systems

Work, Power, and Mechanical Energy Conservation, Efficiency, and Systems Thermal Energy, Calorimetry, and Phase Change

4 Electric Charge, Fields, and Circuits

Charge, Fields, and Electric Potential Current, Voltage, Resistance, and Ohm's Law Series, Parallel Circuits, and Power Circuit Data Tables and Troubleshooting

5 Waves, Light, Electromagnetic Radiation, and Matter

Wave Properties and Wave Speed Sound, Superposition, and Resonance Reflection, Refraction, and Lenses Electromagnetic Spectrum and Photon Energy Atomic, Nuclear, and Space Evidence

6 Investigations, Engineering Design, and Constructed Response

Data Analysis, Graphs, and Claims Required Investigations and Lab Skills Engineering Design, Models, and Tradeoffs Constructed Response Writing and Scoring

Series, Parallel Circuits, and Power

Key Takeaways Explain This Topic AI

Series circuits have one current path, so current is the same through each component while voltage drops add to the source voltage.

Parallel circuits have multiple branches, so voltage is the same across each branch while branch currents add to the total current.

Equivalent resistance increases when resistors are added in series and decreases when an additional branch is added in parallel.

Electrical power can be found with P = VI , P = I^2R , or P = V^2/R ; the best form depends on which circuit quantities are known.

Bulb brightness in ideal Regents circuit models is usually compared by power, not by current or resistance alone.

Last updated: June 2026

Start With the Circuit Path

Before calculating, trace the path for conventional current. A circuit is series where components share one path. A circuit is parallel where components connect across the same two junctions and create separate branches. Some Regents diagrams combine both, so reduce the circuit in stages.

The 2025 Physics Reference Tables give the circuit rules directly. The exam still expects you to decide which parts are in series, which are in parallel, and which rule applies to each part.

Connection labels should come from nodes, not drawing style. Two components that look side by side are not parallel unless both ends connect to the same pair of junctions.

Series Circuit Rules

In a series section, there is only one path for charge flow. The current is the same through every component: I = I1 = I2 = I3 ... . If the path opens anywhere, current stops everywhere in that series loop.

The source potential difference is shared by the components: V = V1 + V2 + V3 ... . The equivalent resistance is the sum: Req = R1 + R2 + R3 ... .

  • Series feature Meaning
  • one path same current through all components
  • resistors add total resistance is larger than any one resistor
  • voltage divides larger resistance gets larger voltage drop for same current
  • open component whole series path stops conducting

Adding another resistor in series increases total resistance. With the same source voltage, total current decreases. That is why adding bulbs in series usually makes identical bulbs dimmer in an ideal model.

Parallel Circuit Rules

In a parallel section, each branch connects across the same two junctions. The potential difference is the same across every branch: V = V1 = V2 = V3 ... .

Current splits among branches and then recombines: I = I1 + I2 + I3 ... . Equivalent resistance follows 1/Req = 1/R1 + 1/R2 + 1/R3 ... . The equivalent resistance is less than the smallest branch resistance because an additional branch creates another route for charge flow.

Parallel circuits explain why a lamp in one branch can remain lit when another branch opens. The complete branches still have the source voltage across them. Total current from the source changes because one branch current has been removed.

Combined Circuits

Many exam diagrams are not purely series or purely parallel. Find the simplest group first. If two resistors share the same two junctions, reduce them as a parallel combination. If a resistor is then in the only path with that combination, add it as a series part.

Use this reduction routine:

Mark junctions where current can split or recombine.

Identify groups that are clearly series or parallel.

Replace one group with its equivalent resistance.

Repeat until one equivalent resistance remains.

Use source voltage to find total current.

Work backward to find branch currents or voltage drops.

A common mistake is to add every resistor because they appear in one drawing. Circuit connection, not visual position, controls the rule.

Electrical Power

Electrical power is the rate of electrical energy transfer. The reference tables list P = VI , P = I^2R , and P = V^2/R . They are equivalent when Ohm's law applies, but each is convenient in a different situation.

  • Known quantities Convenient power form
  • voltage and current P = VI
  • current and resistance P = I^2R
  • voltage and resistance P = V^2/R
  • power and time W = Pt

Power is measured in watts, or joules per second. Electrical energy can be found with W = Pt , W = VIt , W = I^2Rt , or W = V^2t/R . Choose the form that matches the given data.

Comparing Bulb Brightness

In ideal Regents circuit models, brightness is a clue for power. More power means more electrical energy transformed each second into light and thermal energy.

For bulbs in series, the same current passes through each bulb. If resistances differ, P = I^2R shows the larger resistance dissipates more power. For branches in parallel across the same source, each branch has the same voltage. In that case, P = V^2/R shows the lower-resistance branch has greater power.

For identical bulbs, series bulbs share the source voltage and are dimmer than one bulb alone. Identical parallel bulbs each receive the full source voltage and can be as bright as a single bulb, while the source supplies more total current.

Energy Transfer and Devices

Circuit power connects directly to energy. A heater, lamp, motor, or charger transforms electrical energy into other forms. A 40 W device transfers 40 J of energy each second. If it runs for 30 s, it transfers 1200 J.

The educator guide includes energy conversion in devices and optimization of desired outcomes. For a generator or load comparison, use electrical output power as evidence when the goal is electrical output. Use efficiency only when input and useful output are both given.

Common Series and Parallel Traps

Saying current is used up after the first resistor in series.

Giving each series resistor the full source voltage.

Adding parallel resistances directly.

Forgetting that total parallel current is the sum of branch currents.

Comparing bulb brightness by resistance alone without checking whether voltage or current is shared.

Using watts when the question asks for joules over time.

Circuit questions become manageable when you label paths first, reduce resistance carefully, and choose the power form from the known quantities.