Study guide

2.3 Practising Licence & Electrician Limits of Work

NZ EWRB Electrician Registration Regulations

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Exam Overview

1.1 Current Exam Facts 1.2 Open-Reference Strategy & Permitted Materials 1.3 Electrician Registration Pathway & Limits of Work 1.4 Which Editions Apply: ESR Schedule 2 & the 13 November 2025 Update

2 Electricity Act & EWRB Framework

2.1 Electricity Act 1992 Framework 2.2 EWRB Role, Register & Registration Classes 2.3 Practising Licence & Electrician Limits of Work

3 Electricity (Safety) Regulations 2010

3.1 ESR 2010 Structure & Key Definitions 3.2 Electrically Safe & Electrically Unsafe 3.3 Duties of Electrical Workers & Competence 3.4 Certification Timeframes & Notification Duties under ESR

4 Prescribed Electrical Work

4.1 What Is Prescribed Electrical Work 4.2 PEW Risk Categories: Low, General, High 4.3 Who May Carry Out and Supervise PEW 4.4 High-Risk Work & Electrical Inspector Requirements

5 Certification Documents (CoC, ESC, RoI)

5.1 Certificate of Compliance (Regulation 65) 5.2 Electrical Safety Certificate (Safe to Connect / Use) 5.3 Record of Inspection (Regulation 72) 5.4 Record-Keeping, Retention & the Certification Chain 5.5 Record-Keeping Duties & the Statutory Clocks (regs 72A, 74E–74H)

6 AS/NZS 3000 Fundamentals

6.1 Structure of AS/NZS 3000 & Open-Book Navigation 6.2 Multiple Earthed Neutral (MEN) System 6.3 Basic Protection vs Fault Protection 6.4 Protective Devices, Discrimination & Coordination

7 RCDs, Shock Protection & Disconnection Times

7.1 RCD Shock-Protection Requirements 7.2 RCD Types, Classification & Installation Contexts 7.3 Disconnection Times (0.4 s / 5 s) & Earth Fault Path 7.4 Damp Situations & Additional Protection

8 Circuits, Maximum Demand & Voltage Drop

8.1 Division of Circuits & Final Subcircuits 8.2 Maximum Demand Principles 8.3 Voltage Drop Requirements & Worked Examples

9 Testing & Verification Core

9.1 Visual Inspection Before Testing 9.2 Continuity of Earthing & Protective Bonding 9.3 Insulation Resistance Testing (500 V DC, 1 MΩ) 9.4 Polarity & Correct Circuit Connections

10 EFLI, RCD Tests & Verification Sequence

10.1 Earth Fault Loop Impedance 10.2 RCD Operation Tests & Prospective Fault Current 10.3 Mandatory Test Sequence & Documentation

11 Safe Isolation & Personal Safety

11.1 Physiological Effects of Current & Shock Factors 11.2 Prove–Test–Prove Safe Isolation 11.3 Lock-Out/Tag-Out & Safety Tag System 11.4 Live-Work Controls, Fault Finding & Unsafe Installations

12 Electrical Codes of Practice & Schedule 2

12.1 NZECP 34 Electrical Safe Distances 12.2 NZECP 50 Repair of Domestic Electrical Equipment 12.3 NZECP 51 Electrical Wiring Work in Domestic Premises 12.4 NZECP 54 Recessed Luminaires & Auxiliary Equipment 12.5 ESR Schedule 2 & Companion Standards Overview

13 Installation Requirements

13.1 Consumer Mains, Point of Supply & Switchboards 13.2 Conductor Identification, Isolation, Labelling & IP Ratings 13.3 Cable Selection (AS/NZS 3008.1.2 NZ Conditions) 13.4 Construction Sites, Appliance Testing & Special Installations 13.5 Periodic Assessment, Warrants of Electrical Fitness & AS/NZS 3019

14 Exam Strategy & Key Numbers

14.1 Must-Know Numbers, Times & Thresholds 14.2 Exam Tactics & Common Traps

2.3 Practising Licence & Electrician Limits of Work

Key Takeaways Explain This Topic AI

To carry out prescribed electrical work you must generally hold the appropriate registration class and a current practising licence, subject only to limited trainee and other permitted pathways.

Electrician limits of work (Rules of the Board) cover conductors, fittings, connection/disconnection of installations (not mere plug-in), appliance maintenance within scope, testing, certification, and supervision.

Limits of work determine who may certify PEW and who must involve an Electrical Inspector for high-risk inspection—exam scenarios turn on these boundaries.

Supervisors of trainees remain responsible for ensuring work is within lawful scope, adequately supervised, and safe.

Practising outside limits or without authority engages public-safety duties and can lead to Board disciplinary consequences.

Last updated: August 2026

2.3 Practising Licence & Electrician Limits of Work

This section covers authorised practice : who may carry out PEW today, what an Electrician may do under Board limits of work, and how supervision and certification boundaries protect the public.

Practising licence as the authority to carry out PEW

As a rule you must hold:

  • Appropriate registration (for this pathway: Electrician), and
  • A current practising licence for that registration,

to carry out prescribed electrical work .

Limited pathways exist—mainly trainees under authorised supervision, plus any other permitted exemptions. They are narrow by design. An "apprentice working alone on live PEW" is unlawful, not "nearly qualified."

Operational checklist before PEW:

Is this activity PEW (not mere use of a plug-in appliance)?

Does the person hold the right registration class for the task?

Is their practising licence current (unless a permitted trainee/limited pathway applies)?

Is the work within that class's limits of work ?

Does the risk category trigger extra certification or Inspector involvement?

If any answer is no, stop and correct the authorisation path before the work proceeds.

Electrician limits of work (Rules of the Board)

Limits of work define the PEW an Electrician may perform under Board rules. Treat them as the class boundary, not optional guidelines. Learn the categories below so you can classify scenarios (exact wording lives in current Board rules).

  • Area within Electrician limits (concept level) What it covers in practice
  • Conductors Installing, connecting, maintaining, and working on electrical conductors as PEW within class scope
  • Fittings Work on electrical fittings forming part of installations

Connection / disconnection Connecting or disconnecting installations or equipment as PEW— not the mere act of plugging in or unplugging a compliant appliance by a user

Appliance maintenance Maintenance work on appliances within Electrician scope (distinct from pure user operation)

Testing Verification and testing associated with PEW and safety confirmation

Certification Issuing certification documents the Electrician is authorised to issue for work within scope (e.g. CoC/ESC pathways as applicable)

Supervision Supervising trainees and others as permitted when overseeing PEW

Critical distinction — connection vs plug-in:

Exam writers love this trap. Plugging a portable appliance into a socket-outlet is ordinary use of an installation. Connecting fixed wiring, hard-wired equipment, or making installation connections is PEW within authorised limits. If the stem describes "connecting the new permanently wired unit to the circuit," think PEW and licence—not "anyone can plug things in."

The same logic applies to temporary construction supplies, hard-wired plant, and switchboard alterations: if you are changing how the installation is connected—not merely using an existing outlet—you are in PEW territory and need the right registration, licence, and limits.

Why limits matter for exam scenarios

Limits of work decide who may act in multi-person scenarios:

Who may certify?

Certification documents must be issued by a person authorised for that work. An Electrician certifies within Electrician authority; others cannot borrow those rights. Trainees do not self-certify unrestricted PEW—the authorised person remains responsible as the Regulations prescribe.

Who may inspect high-risk work?

High-risk PEW inspection is not the same as Electrician certification. An Electrical Inspector issues a Record of Inspection (RoI) where required. "I installed it and issued a CoC" is not independent high-risk inspection.

Who may supervise what?

Supervision authority tracks the supervisor's own lawful scope. You cannot supervise someone into work you cannot control.

Supervision responsibilities when overseeing trainees

Trainees gain PEW experience under supervision—a public-safety control, not a formality. Supervisors must confirm the work is allowed under supervision, provide oversight proportional to risk and competence, ensure safe isolation and quality, remain accountable, and not use trainees to dodge licence or class limits. Off-site, uncontactable, or wrong-class "supervisors" fail that test.

Public safety and Board disciplinary context

PEW can kill, burn, or leave latent faults. Practising outside authority is a safety failure, not a paperwork technicality.

At high level, the Board can take disciplinary action for failures of competence, integrity, or practising standards. Working without a current practising licence, outside class limits, or certifying falsely undermines the register's public purpose. For the exam: wrong person + PEW = unsafe governance of the work , even if the termination looks neat. Safety includes who did the work, not only how it was done.

Decision tree for PEW authority

Is it PEW? If no (e.g. user plug-in), PEW licence rules may not apply.

Who is proposed to do it? Note class and licence status.

Within Electrician limits? Conductors, fittings, connection/disconnection, maintenance, testing, certification, supervision.

High-risk inspection needed? If yes, Electrical Inspector / RoI—not Electrician alone.

Trainee involved? Confirm authorised supervisor and real supervision.

Certification required? Match document to risk category and authorised issuer (later chapters).

Practising licences and limits of work enforce the Act's competence purpose. The register shows who is registered; the practising licence and limits show what that person may do now . ESR 2010 then specifies PEW definitions, risk categories, and certification on top of that authority model.