Study guide
Electricity, Circuits, and Magnetism
OAR Officer Aptitude Rating
Track your progress as you read
Finished sections get a check mark.
1 Introduction to the OAR
About the OAR Who Takes the OAR and Why Study Plan and Test-Day Strategy
2 Math Skills Test (MST)
Arithmetic Fundamentals Fractions, Ratios, and Proportions Percentages and Real-World Applications Algebra Essentials Geometry Foundations Word Problems, Statistics, and Data Interpretation
3 Reading Comprehension Test (RCT)
RCT Overview and Core Strategies Main Idea and Purpose Questions Detail, Fact, and Inference Questions Vocabulary in Context and Author Tone Advanced Reading Strategies and Passage Types RCT Practice Passages and Questions
4 Mechanical Comprehension Test (MCT)
Forces and Newton's Laws of Motion Energy, Work, and Power Simple Machines and Mechanical Advantage Gears, Belts, and Rotational Motion Fluids, Pressure, and Hydraulics Electricity, Circuits, and Magnetism Motion, Heat, and Thermodynamics MCT Practice Problems and Review
5 Full Practice Tests and Final Review
Practice Test: Math Skills Practice Test: Reading Comprehension Practice Test: Mechanical Comprehension Final Review and Test-Day Preparation
Electricity, Circuits, and Magnetism
Key Takeaways Explain This Topic AI
Ohm's Law (V = IR) is the fundamental equation for electrical circuits on the OAR.
In series circuits, current is the same everywhere but voltage divides; in parallel circuits, voltage is the same but current divides.
Power in electrical circuits: P = IV = I²R = V²/R.
Resistors in series add directly (R_total = R₁ + R₂); in parallel, use 1/R_total = 1/R₁ + 1/R₂.
Capacitors store electrical energy; inductors resist changes in current — both appear in OAR questions.
Last updated: March 2026
Electrical concepts appear regularly on the OAR MCT. You do not need advanced electrical engineering knowledge — focus on Ohm's Law, circuit types, and basic component behavior.
Fundamental Electrical Quantities
- Quantity Symbol Unit Water Analogy
- Voltage V Volts (V) Water pressure
- Current I Amperes (A) Water flow rate
- Resistance R Ohms (Ω) Pipe narrowness
- Power P Watts (W) Rate of energy use
- The Water Analogy
Think of electricity like water flowing through pipes:
- Voltage is the pressure pushing water through
- Current is the amount of water flowing per second
- Resistance is how narrow or blocked the pipe is
- Higher pressure (voltage) pushes more water (current) through
- A narrower pipe (higher resistance) reduces flow (current)
- Ohm's Law
- V = I × R
This is the most important electrical equation for the OAR.
- Find Formula
- Voltage V = IR
- Current I = V/R
- Resistance R = V/I
Example: A circuit has a 12V battery and a 4Ω resistor. What is the current?
I = V/R = 12/4 = 3 A
Example: A 2A current flows through an 8Ω resistor. What voltage is across the resistor?
- V = IR = 2 × 8 = 16 V
- Series Circuits
Components are connected end-to-end in a single path.
Series Rules
- Property Rule
- Current Same through all components: I_total = I₁ = I₂ = I₃
- Voltage Divides among components: V_total = V₁ + V₂ + V₃
- Resistance Adds directly: R_total = R₁ + R₂ + R₃
Example: Three resistors (2Ω, 3Ω, 5Ω) are connected in series to a 20V battery.
- R_total = 2 + 3 + 5 = 10Ω
- I = V/R = 20/10 = 2A (same through all)
- V across 2Ω: V = IR = 2 × 2 = 4V
- V across 3Ω: V = IR = 2 × 3 = 6V
- V across 5Ω: V = IR = 2 × 5 = 10V
- Check: 4 + 6 + 10 = 20V ✓
- Series Circuit Facts
- If one component breaks, the entire circuit stops (think: old Christmas lights)
- Larger resistors drop more voltage
- Adding more resistors decreases total current
- Parallel Circuits
Components are connected side-by-side, each with its own path to the power source.
Parallel Rules
- Property Rule
- Voltage Same across all branches: V_total = V₁ = V₂ = V₃
- Current Divides among branches: I_total = I₁ + I₂ + I₃
- Resistance Reciprocal formula: 1/R_total = 1/R₁ + 1/R₂ + 1/R₃
Example: Two resistors (6Ω and 3Ω) are in parallel with a 12V battery.
- 1/R_total = 1/6 + 1/3 = 1/6 + 2/6 = 3/6 = 1/2 → R_total = 2Ω
- I_total = 12/2 = 6A
- I through 6Ω: I = 12/6 = 2A
- I through 3Ω: I = 12/3 = 4A
- Check: 2 + 4 = 6A ✓
- Parallel Circuit Shortcut (Two Resistors)
- R_total = (R₁ × R₂) / (R₁ + R₂)
Example: 4Ω and 12Ω in parallel:
- R_total = (4 × 12)/(4 + 12) = 48/16 = 3Ω
- Parallel Circuit Facts
- If one branch breaks, others continue working (think: modern house wiring)
- Total resistance is ALWAYS less than the smallest individual resistor
- Adding more branches decreases total resistance and increases total current
- Series vs. Parallel Comparison
- Feature Series Parallel
- Current Same everywhere Divides among branches
- Voltage Divides among components Same across all branches
- Total resistance Sum of all R Less than smallest R
- One component fails Whole circuit stops Other branches continue
- Adding components Increases total R, decreases I Decreases total R, increases I
- Electrical Power
- P = I × V = I²R = V²/R
- Find Formula When to Use
- Power P = IV When you know I and V
- Power P = I²R When you know I and R
- Power P = V²/R When you know V and R
Example: A 120V appliance draws 5A. What power does it consume?
P = 120 × 5 = 600 W
Example: What is the resistance of a 100W light bulb at 120V?
- R = V²/P = 120²/100 = 14,400/100 = 144Ω
- Key Components
- Capacitors
- Store electrical energy in an electric field
- Charge up when connected to a voltage source, discharge when the source is removed
- Block DC current but pass AC current
- In series: 1/C_total = 1/C₁ + 1/C₂ (opposite of resistors!)
- In parallel: C_total = C₁ + C₂ (opposite of resistors!)
- Inductors
- Resist changes in current using a magnetic field
- Oppose increases in current when energized, oppose decreases when de-energized
- Pass DC current but resist AC current (opposite of capacitors)
- Transformers
- Change voltage levels using electromagnetic induction
- V₁/V₂ = N₁/N₂ (voltage ratio equals turns ratio)
- Step-up transformer: increases voltage, decreases current
- Step-down transformer: decreases voltage, increases current
- Power is conserved: V₁I₁ = V₂I₂
- Magnetism
- Key Concepts
- Electric current creates a magnetic field
- Moving a conductor through a magnetic field generates voltage (electromagnetic induction)
- Electromagnets: coils of wire with current produce magnetic fields; more turns = stronger field
- Permanent magnets: like poles repel, opposite poles attract