Study guide
Fluids, Pressure, and Hydraulics
OAR Officer Aptitude Rating
Track your progress as you read
Finished sections get a check mark.
1 Introduction to the OAR
About the OAR Who Takes the OAR and Why Study Plan and Test-Day Strategy
2 Math Skills Test (MST)
Arithmetic Fundamentals Fractions, Ratios, and Proportions Percentages and Real-World Applications Algebra Essentials Geometry Foundations Word Problems, Statistics, and Data Interpretation
3 Reading Comprehension Test (RCT)
RCT Overview and Core Strategies Main Idea and Purpose Questions Detail, Fact, and Inference Questions Vocabulary in Context and Author Tone Advanced Reading Strategies and Passage Types RCT Practice Passages and Questions
4 Mechanical Comprehension Test (MCT)
Forces and Newton's Laws of Motion Energy, Work, and Power Simple Machines and Mechanical Advantage Gears, Belts, and Rotational Motion Fluids, Pressure, and Hydraulics Electricity, Circuits, and Magnetism Motion, Heat, and Thermodynamics MCT Practice Problems and Review
5 Full Practice Tests and Final Review
Practice Test: Math Skills Practice Test: Reading Comprehension Practice Test: Mechanical Comprehension Final Review and Test-Day Preparation
Fluids, Pressure, and Hydraulics
Key Takeaways Explain This Topic AI
Pressure = Force / Area. The same force over a smaller area creates more pressure.
Pascal's Principle: pressure applied to an enclosed fluid is transmitted equally in all directions.
Hydraulic systems multiply force: a small piston pushing on fluid can create a large force at a bigger piston.
Bernoulli's Principle: faster fluid flow = lower pressure. This is how airplane wings generate lift.
Buoyancy: an object floats when it displaces fluid equal to its own weight (Archimedes' Principle).
Last updated: March 2026
Fluid mechanics questions appear regularly on the OAR MCT. These concepts are especially relevant for Navy and Marine Corps candidates since naval operations involve constant interaction with fluid systems.
- Pressure
- Definition
- Pressure = Force / Area
- P = F / A
- Variable Unit
- Pressure (P) Pascals (Pa) = N/m², or PSI (lb/in²)
- Force (F) Newtons (N) or pounds (lb)
- Area (A) m² or in²
- Why Pressure Matters
The same force creates different effects depending on the area:
- Scenario Force Area Pressure
- Standing in boots 800 N 400 cm² 2 N/cm²
- Standing in high heels 800 N 2 cm² 400 N/cm²
- Nail point 50 N 0.01 cm² 5,000 N/cm²
This explains why:
- Knives cut because force is concentrated on a thin edge
- Wide tires spread weight for less ground pressure
- Snowshoes prevent sinking by distributing weight over a large area
Example: A 600 N crate sits on a 0.5 m × 0.4 m base.
- Pressure = 600 / (0.5 × 0.4) = 600 / 0.2 = 3,000 Pa
- Atmospheric Pressure
Standard atmospheric pressure at sea level:
- 101,325 Pa (101.3 kPa)
- 14.7 PSI
- 1 atm
- 760 mmHg (millimeters of mercury)
- Pressure increases with depth in a fluid: P = ρgh
Where ρ (rho) is fluid density, g is gravity, and h is depth.
Pascal's Principle
Pressure applied to an enclosed fluid is transmitted equally and undiminished to every point in the fluid and to the walls of the container.
Hydraulic Systems
This principle is the foundation of hydraulic systems.
- F₁/A₁ = F₂/A₂
- Or equivalently: F₂ = F₁ × (A₂/A₁)
- Component Small Piston Large Piston
- Area A₁ (small) A₂ (large)
- Force F₁ (small) F₂ (large)
- Distance moved d₁ (large) d₂ (small)
Example: A hydraulic jack has a small piston (area = 2 cm²) and a large piston (area = 50 cm²). If you push the small piston with 20 N, what force does the large piston exert?
F₂ = 20 × (50/2) = 20 × 25 = 500 N
The trade-off: you must push the small piston 25 times farther than the large piston moves.
Hydraulic Brake Systems
Car brakes use Pascal's Principle:
- You press the brake pedal (small force over small area)
- Hydraulic fluid transmits pressure to all brake calipers equally
- Large brake pistons squeeze the rotors with multiplied force
- Bernoulli's Principle
In a flowing fluid, as speed increases, pressure decreases (and vice versa).
P₁ + 1/2ρv₁² + ρgh₁ = P₂ + 1/2ρv₂² + ρgh₂
For the OAR, the qualitative understanding is more important than the formula:
Fast flow = Low pressure | Slow flow = High pressure
- Application How Bernoulli's Principle Applies
- Airplane wing (airfoil) Air moves faster over the curved top → lower pressure above → lift
- Venturi tube Narrow section → faster flow → lower pressure → suction effect
- Curveball in baseball Spinning ball creates faster flow on one side → curves toward low pressure
- Shower curtain blows inward Fast water flow creates low pressure inside → curtain pushed in
- Chimney draft Wind over chimney top → low pressure → draws smoke upward
- Continuity Equation
- A₁v₁ = A₂v₂ (for incompressible fluids in a pipe)
Where A = cross-sectional area and v = flow velocity.
A narrower pipe → faster flow. Think of a garden hose: partially cover the opening and the water sprays faster.
Example: Water flows through a pipe at 2 m/s where the diameter is 10 cm. What is the speed where the diameter narrows to 5 cm?
- A₁ = π(5)² = 25π cm²
- A₂ = π(2.5)² = 6.25π cm²
- 25π × 2 = 6.25π × v₂
- v₂ = (25 × 2) / 6.25 = 8 m/s
- Buoyancy and Archimedes' Principle
An object submerged in fluid experiences an upward buoyant force equal to the weight of the fluid it displaces.
- F_buoyant = ρ_fluid × g × V_displaced
- Floating vs. Sinking
- Condition Result
- Object density < Fluid density Floats (partially submerged)
- Object density = Fluid density Neutrally buoyant (hovers)
- Object density > Fluid density Sinks
- Why Ships Float
Steel is denser than water, so how do steel ships float? Because a ship's hull encloses a large volume of air, making the ship's average density less than water. The ship displaces a volume of water equal to its weight before becoming fully submerged.
Example: A block of wood (density = 600 kg/m³) is placed in water (density = 1,000 kg/m³). What fraction is submerged?
- Fraction submerged = ρ_object / ρ_fluid = 600/1,000 = 0.6 (60% submerged)
- Fluid Properties Summary
- Property Definition Key Relationship
- Density Mass per unit volume (ρ = m/V) Determines floating vs. sinking
- Viscosity Resistance to flow Higher viscosity = slower flow
- Compressibility How much volume changes under pressure Liquids: nearly incompressible; Gases: compressible