Study guide

Gears, Belts, and Rotational Motion

OAR Officer Aptitude Rating

Track your progress as you read

Finished sections get a check mark.

1 Introduction to the OAR

About the OAR Who Takes the OAR and Why Study Plan and Test-Day Strategy

2 Math Skills Test (MST)

Arithmetic Fundamentals Fractions, Ratios, and Proportions Percentages and Real-World Applications Algebra Essentials Geometry Foundations Word Problems, Statistics, and Data Interpretation

3 Reading Comprehension Test (RCT)

RCT Overview and Core Strategies Main Idea and Purpose Questions Detail, Fact, and Inference Questions Vocabulary in Context and Author Tone Advanced Reading Strategies and Passage Types RCT Practice Passages and Questions

4 Mechanical Comprehension Test (MCT)

Forces and Newton's Laws of Motion Energy, Work, and Power Simple Machines and Mechanical Advantage Gears, Belts, and Rotational Motion Fluids, Pressure, and Hydraulics Electricity, Circuits, and Magnetism Motion, Heat, and Thermodynamics MCT Practice Problems and Review

5 Full Practice Tests and Final Review

Practice Test: Math Skills Practice Test: Reading Comprehension Practice Test: Mechanical Comprehension Final Review and Test-Day Preparation

Gears, Belts, and Rotational Motion

Key Takeaways Explain This Topic AI

Meshing gears rotate in opposite directions; gears connected by a belt or chain rotate in the same direction.

Gear ratio = Teeth on driven gear / Teeth on driving gear = Speed reduction ratio.

A larger gear drives a smaller gear faster (speed multiplication) but with less torque.

A smaller gear drives a larger gear slower (speed reduction) but with more torque.

In a gear train, the overall ratio is the product of each stage's ratio.

Last updated: March 2026

Gear questions are among the most common on the OAR MCT. The key is understanding direction, speed, and torque relationships.

  • Gear Basics
  • Direction of Rotation
  • Connection Type Direction Rule
  • Meshing (teeth touching) Adjacent gears rotate in opposite directions
  • Belt or chain Connected gears rotate in the same direction
  • Crossed belt Connected gears rotate in opposite directions
  • Idler gear Reverses direction between two gears but does not change the speed ratio
  • Gear Train Direction

For meshing gears in a train:

  • Odd number of gears (1, 3, 5...): First and last rotate in the same direction
  • Even number of gears (2, 4, 6...): First and last rotate in opposite directions

Example: Gear A meshes with B, B meshes with C, C meshes with D.

  • A and B: opposite
  • B and C: opposite (so A and C: same)
  • C and D: opposite (so A and D: opposite)

Four gears → first and last rotate in opposite directions.

  • Gear Ratios
  • Speed Ratio
  • Gear Ratio = Teeth on driven gear / Teeth on driving gear
  • Or equivalently: Speed₁ × Teeth₁ = Speed₂ × Teeth₂
  • Scenario Result
  • Large gear drives small gear Small gear spins FASTER
  • Small gear drives large gear Large gear spins SLOWER

Example: Gear A (driving) has 20 teeth. Gear B (driven) has 60 teeth.

  • Gear ratio = 60/20 = 3:1
  • Gear B rotates at 1/3 the speed of Gear A
  • If A spins at 300 RPM, B spins at 100 RPM
  • Torque Ratio

Torque is the rotational equivalent of force. Gear systems trade speed for torque:

Speed × Torque = constant (in an ideal system)

  • Scenario Speed Torque
  • Large gear drives small gear Speed increases Torque decreases
  • Small gear drives large gear Speed decreases Torque increases

Example: An engine gear (12 teeth) drives a wheel gear (48 teeth).

  • Speed ratio: Wheel turns at 12/48 = 1/4 engine speed
  • Torque multiplied by 4 (48/12 = 4)

This is exactly how a car transmission works: lower gears provide more torque (for acceleration), higher gears provide more speed (for cruising).

Compound Gear Trains

When multiple gear pairs are connected on shared shafts, multiply the individual ratios:

Overall Ratio = Ratio₁ × Ratio₂ × Ratio₃ × ...

Example:

  • Stage 1: 10-tooth gear drives 40-tooth gear (ratio = 4:1)
  • Stage 2: 10-tooth gear (on same shaft as the 40-tooth) drives 30-tooth gear (ratio = 3:1)
  • Overall ratio = 4 × 3 = 12:1

The output shaft rotates at 1/12 the input speed, but with 12 times the torque.

  • Belt and Chain Drives
  • Speed Relationships
  • Speed₁ × Diameter₁ = Speed₂ × Diameter₂
  • (For chains: replace diameter with number of sprocket teeth)

Example: A motor pulley (diameter 10 cm) drives a machine pulley (diameter 30 cm) via a belt.

  • 10 × Speed_motor = 30 × Speed_machine
  • Speed_machine = 10/30 × Speed_motor = 1/3 of motor speed
  • Belt Types
  • Belt Type Direction Slip
  • Flat belt (parallel) Same direction Some slip possible
  • V-belt Same direction Less slip (wedges into pulley)
  • Crossed belt Opposite directions Some slip possible
  • Chain drive Same direction No slip (positive engagement)
  • Torque and Moment
  • Torque (τ) = Force × Distance from pivot (perpendicular distance)
  • τ = F × r
  • Variable Unit
  • Torque (τ) Newton-meters (N·m) or foot-pounds (ft·lb)
  • Force (F) Newtons (N) or pounds (lb)
  • Distance (r) Meters (m) or feet (ft)

Example: A wrench handle is 0.3 m long. If you apply 100 N at the end, what torque do you generate?

  • τ = 100 × 0.3 = 30 N·m
  • Longer Handle = More Torque

This is why a longer wrench makes loosening a bolt easier — you are increasing r, which increases torque with the same applied force.

  • Angular Velocity
  • ω (omega) = 2π × RPM / 60 (in radians per second)

Or simply use RPM (revolutions per minute) for comparison problems on the OAR.

Relationship: v = ωr (linear velocity = angular velocity × radius)

Gears of different sizes that mesh together have the same linear velocity at their contact point, but different angular velocities.

Loading diagram... Gear Ratio Example: Speed Reduction