Study guide
12.3 Nail Product Ingredients & Chemical Sensitivity
Ohio Nail Technician License Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: The Ohio Manicurist Exams & Licensing Pathway
1.1 The Manicure Theory & Practical Exams: Format, Blueprint & Scoring 1.2 Ohio Board Powers, Licensing Eligibility & Scope of Practice 1.3 The 200-Hour Curriculum, Work Permits & Exam-Day Logistics 1.4 License Renewal, Continuing Education & Inactive Status
2 Chapter 2: Ohio Salon Law, Inspection & Enforcement
2.1 Salon Facility Standards, Signage & Required Displays 2.2 Board Inspections, Prohibited Acts, Fines & Discipline 2.3 Prohibited Implements, Products & Practices
3 Chapter 3: Understanding Infection
3.1 Bacteria: Classification, Morphology, Growth & Spores 3.2 Viruses & Bloodborne Pathogens 3.3 Fungi & Parasites in Nail Services 3.4 Immunity & the Chain of Infection
4 Chapter 4: Infection Control Practice
4.1 The Three Levels of Decontamination 4.2 Disinfection Methods & Ohio's Appropriate-Disinfectant Standard 4.3 Hand Washing & Hand Hygiene 4.4 Single-Use vs Multi-Use Implements & Prevention Guidelines 4.5 Pedicure Units, Biofilm & Ohio Equipment Sanitation
5 Chapter 5: Safety, Blood Exposure & First Aid
5.1 Universal Precautions & the Blood Exposure Procedure 5.2 Chemical Safety, SDS & OSHA Hazard Communication 5.3 Ventilation, Airborne Contaminants & Respiratory Protection 5.4 Ergonomics, Fire & Electrical Safety 5.5 First Aid in the Nail Salon
6 Chapter 6: General Anatomy & Physiology
6.1 Cells, Tissues, Organs & Glands 6.2 Body Systems of the Arms, Hands, Legs & Feet
7 Chapter 7: The Skin
7.1 Skin Structure & Layers 7.2 Functions of the Skin, Glands & the Acid Mantle 7.3 Skin Diseases & Disorders of the Hands and Feet
8 Chapter 8: The Nail Unit & Nail Pathology
8.1 The Natural Nail Unit & Structures 8.2 Nail Growth, Composition & Keratinization 8.3 Non-Infectious Nail Disorders 8.4 Infectious Nail Diseases & Mandatory Referral
9 Chapter 9: Consultation & Client Protection
9.1 Client Consultation, Health History & Contraindications
10 Chapter 10: Manicure, Pedicure, Massage & Spa Services
10.1 The Basic Manicure: Setup, Shaping & Cuticle Care 10.2 Polish Application & Colour Theory 10.3 Professional Pedicure Procedures, Equipment & Safety 10.4 Massage Movements & Benefits in Nail Services 10.5 Paraffin, Hot Oil & Spa Treatments
11 Chapter 11: Artificial Nail Services
11.1 Nail Tips: Sizing, Application & Blending 11.2 Nail Wraps: Silk, Fibreglass & Linen 11.3 Sculptured Monomer & Polymer Nails 11.4 Light-Cured Gels & Dip Powder Systems
12 Chapter 12: Product Chemistry, Tools & Equipment
12.1 Basics of Chemistry: Matter, Elements, Atoms, Molecules & Compounds 12.2 Chemical Reactions, Polymerization & Adhesion 12.3 Nail Product Ingredients & Chemical Sensitivity 12.4 Implements, Tools & Abrasives 12.5 Salon Equipment, Electricity & Electric Filing Safety
12.3 Nail Product Ingredients & Chemical Sensitivity
Key Takeaways Explain This Topic AI
Nitrocellulose is the primary film former in traditional nail lacquer, which dries by solvent evaporation — a physical change — and is therefore removable with solvent.
Isopropyl alcohol is a cleanser and antiseptic but does not meet Ohio's definition of an appropriate disinfectant in OAC 4713-1-01.
Ohio has no numbered rule naming MMA: it was placed on the Board's non-approved chemical list in 1997 and is cited through OAC 4713-1-07, with inspectors verifying ingredients through safety data sheets.
MMA cures rigid and resists acetone, so under trauma the enhancement holds and the natural plate tears off the bed; EMA flexes and dissolves in acetone.
Uncured acrylates such as HEMA are potent sensitisers and the resulting allergic contact dermatitis is permanent, so prevention through full curing and keeping product off skin is the entire strategy.
Last updated: September 2026
Nail Product Ingredients and Chemical Sensitivity
Ohio State Board Exam Alert: "Products & Ingredients" is the first leaf under the 10 % Product Knowledge & Chemistry domain, and Ohio's 200-hour curriculum lists "product chemistry" inside the Nail Enhancements block. Ingredient questions are also where Ohio's MMA position and the profession's central occupational hazard — acrylate sensitisation — are examined.
1. Reading a Nail Product Like a Chemist
Almost every product on a nail station belongs to one of six functional families.
- Family What it does Typical ingredients
- Solvents Dissolve, thin, clean, remove Acetone; ethyl acetate; butyl acetate; isopropyl alcohol
Monomers / oligomers Build the enhancement Ethyl methacrylate (EMA); HEMA; urethane acrylate oligomers; di-HEMA trimethylhexyl dicarbamate
Polymers Provide bulk and film Polyethyl methacrylate powder; nitrocellulose in lacquer
Initiators, catalysts and inhibitors Start, speed and control curing Benzoyl peroxide (in polymer powder); photoinitiators; hydroquinone-type inhibitors that give shelf life
Plasticisers and resins Prevent brittleness, improve flow and gloss Camphor; acetyl tributyl citrate; adipic acid copolymers
Colourants and effects Colour and finish Pigments; mica; titanium dioxide; iron oxides
Three ingredient facts recur on examinations:
Nitrocellulose is the primary film former in traditional nail lacquer; the solvent evaporates and leaves the nitrocellulose film behind. Lacquer therefore dries by evaporation , a physical change — which is exactly why lacquer can be removed with solvent and a cured enhancement cannot.
Benzoyl peroxide in polymer powder is the initiator that starts polymerisation when it meets the monomer's catalyst; this is why acrylic cures without a lamp.
Photoinitiators absorb specific wavelengths from a UV or LED lamp and fragment into free radicals; this is why gel needs the matching lamp and why a mismatched lamp leaves an under-cured layer.
2. The Three Common Solvents
Solvent Strength Typical use Notes
Acetone Strongest Removing enhancements, soak-off gel, cleaning implements of product Extremely drying and defatting to skin and plate; flash point about −4 °F
Ethyl acetate Moderate The main solvent in "non-acetone" removers Gentler on the plate; slower on enhancements
Isopropyl alcohol Mild Nail cleanser, wiping the inhibition layer, surface sanitising Flash point about 53 °F; not a disinfectant for implements under Ohio's definition
That last point deserves emphasis. Isopropyl alcohol is not an "appropriate disinfectant" under OAC 4713-1-01 , which requires an EPA-registered product or a ≥5.25 % sodium hypochlorite solution at 1:9. Alcohol is a cleanser and an antiseptic; it is not the immersion disinfectant Ohio requires for implements.
3. MMA and EMA: Ohio's Position
Ohio placed methyl methacrylate (MMA) on its list of non-approved chemicals in 1997 , and treats its use, storage or dispensing in a licensed facility as grounds for citation. There is no numbered rule in the Administrative Code naming MMA; enforcement runs through OAC 4713-1-07 (unprofessional conduct, out-of-scope practice), and inspectors ask salons to produce safety data sheets for nail products so ingredients can be verified.
At the examination bench the policy appears in a very concrete form: the Manicuring Practical Testing Information Packet requires an odour-free nail liquid and states that using a nail liquid with an odour "will result in your dismissal from this exam."
- MMA EMA
- Molecule Small; penetrates skin and plate readily Larger; penetrates less
- Cured film Rigid, does not flex with the natural nail Flexible enough to absorb impact
Failure under trauma Enhancement holds — the natural plate tears off the bed Enhancement cracks or lifts, sparing the plate
- Acetone removal Will not dissolve properly; must be drilled off Dissolves
- Odour Sharp and distinctive Comparatively mild; odour-free formulations available
- Intended purpose Dental and orthopaedic acrylics, bone cement Cosmetic nail enhancement
Warning signs of an MMA product in a salon: an unusually strong sharp odour, product that will not soak off in acetone, unusually low price, an unlabelled or generically labelled bottle, and enhancements that require heavy drilling to remove.
4. Acrylate Sensitisation — The Profession's Central Occupational Hazard
HEMA (hydroxyethyl methacrylate) and related acrylates appear in most gel polishes, builder gels and some dip systems. Uncured acrylate monomer is a potent skin sensitiser; fully cured polymer is not.
The mechanism matters because it dictates the prevention:
Uncured monomer contacts skin — flooded cuticles, product on the sidewall, an under-cured layer, dust from filing an under-cured enhancement, or a leaking product bottle.
The immune system builds a permanent memory of that molecule.
Once sensitised, the reaction is lifelong and can be triggered by tiny exposures — including, in reported cases, dental composites, orthopaedic bone cement and medical adhesives.
Symptoms: itching, redness, swelling and vesicles at the fingertips, and frequently at the eyelids, face and neck where the client or technician touches themselves.
Prevention is straightforward and non-negotiable:
Keep product off the skin. Leave a small free margin at the eponychium and sidewalls.
Cure fully. Use the lamp specified for the product, replace ageing UV bulbs, and never shorten cure times. An under-cured layer is uncured monomer sitting against skin.
Wear nitrile gloves during removal and when handling monomer; latex gives poor solvent protection and adds an allergy of its own.
Do not file an under-cured enhancement — the dust carries uncured monomer.
Capture dust at source and keep containers closed.
Once a client or technician is sensitised, the only management is avoidance , which is why prevention is the entire strategy.
5. Safety Data Sheets and Ingredient Verification
Under OSHA's Hazard Communication Standard (29 CFR 1910.1200) , a Safety Data Sheet must be available for every hazardous chemical in the workplace, in a standard 16-section format. Section 3 (Composition/Information on Ingredients) is where a technician verifies what is actually in a monomer — the same document an Ohio inspector will ask to see when checking for MMA. Sections 4 (First-aid measures), 7 (Handling and storage) and 8 (Exposure controls/personal protection) are the other three a working technician should be able to find without hesitating.
Ohio adds a labelling layer of its own for examination day: manufacturer's labels are required on all disinfectants and hand sanitisers , labels must be original or photocopied originals , and handwritten or typed labels are expressly unacceptable. All products and supplies must be labelled in English .