Study guide
7.2 Application Methods & Placement
Ohio Commercial Pesticide Applicator Certification Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Federal Pesticide Law & Regulation
1.1 FIFRA & Federal Regulatory Framework 1.2 Pesticide Registration, Classification & Restricted-Use Products 1.3 The Worker Protection Standard in Ohio 1.4 Federal Certification Standards & Supervising Noncertified Applicators 1.5 Professionalism, Chemical Security & Public Communication
2 Chapter 2: Ohio Pesticide Law - ORC Chapter 921
2.1 ORC Chapter 921 & the Authority of the Ohio Department of Agriculture 2.2 Who Must Hold an Ohio Commercial Applicator License 2.3 Private Applicators & Ohio's Private Pesticide-Use Categories 2.4 Trained Servicepersons & Direct Supervision in Ohio 2.5 Prohibited Acts, Disciplinary Action & Penalties
3 Chapter 3: Ohio Administrative Rules & Licensing Logistics
3.1 OAC Chapter 901:5-11: The Rule Map 3.2 The Ohio Exam Path: Core, Category Exams, Fees & Scheduling 3.3 The 26 Ohio Commercial Pesticide-Use Categories 3.4 Annual Renewal, the 3-Year Recertification Cycle & Reciprocity 3.5 Ohio Recordkeeping & Reporting Requirements 3.6 Pesticide Businesses, Dealers, Solicitors & Financial Responsibility
4 Chapter 4: Ohio Site-Specific Rules
4.1 Lawn Pesticide Notification & Posting (OAC 901:5-11-09) 4.2 Pesticide Use in Ohio Schools (OAC 901:5-11-15) 4.3 Ohio's Integrated Pest Management Standard (OAC 901:5-11-14) 4.4 Wood-Destroying Insect Diagnostic Inspections & Category 12
5 Chapter 5: Pests, Pest Biology & Integrated Pest Management
5.1 Pest Categories & Why Correct Identification Comes First 5.2 Insect & Related Arthropod Biology 5.3 Weed Biology, Life Cycles & Identification 5.4 Plant Diseases, Nematodes & Vertebrate Pests 5.5 Principles & Components of Integrated Pest Management 5.6 IPM Control Tactics & Resistance Management
6 Chapter 6: Pesticides, Formulations & Toxicology
6.1 Types of Pesticides & How They Act 6.2 Pesticide Formulations & Physical Properties 6.3 Adjuvants, Compatibility & the Jar Test 6.4 Toxicology, Signal Words & Hazard Communication 6.5 Routes of Exposure, Symptoms & First Aid 6.6 Chronic Health Effects, Cholinesterase Monitoring & Heat Stress 6.7 Personal Protective Equipment (PPE) & Respiratory Protection
7 Chapter 7: Application Equipment, Calibration & Handling
7.1 Planning the Application: Site Assessment & Pre-Application Checks 7.2 Application Methods & Placement 7.3 Application Equipment Types & Operation 7.4 Nozzles: Types, Sizing & Selection 7.5 Equipment Calibration Principles & Applied Calculations 7.6 Granular Spreader & Handgun Calibration 7.7 Mixing, Loading & Handling Operations 7.8 Step-by-Step Calibration & Math Scenarios
8 Chapter 8: Safety, Environment, Labels & Exam Readiness
8.1 Safe Storage, Transport & Facility Security 8.2 Spill Prevention, Containment & Waste Management 8.3 Pesticide Fate in the Environment 8.4 Protecting Groundwater & Surface Water in Ohio 8.5 Pesticide Drift Types & Mitigation Strategies 8.6 Protecting Non-Target Organisms, Pollinators & Wildlife 8.7 Pesticide Label Anatomy & Legal Status 8.8 Comprehensive Exam Review & Scenario Drills
7.2 Application Methods & Placement
Key Takeaways Explain This Topic AI
Method selection is federal core competency area 7 and includes recognizing that fumigation, aerial application, sodium cyanide, and sodium fluoroacetate require additional certification.
Band application treats only a strip over the row and can cut product use dramatically compared with broadcast treatment of the same field.
Spot and directed treatments place product only where the pest is, which is the least-exposure choice an Ohio IPM program is required to consider.
Structural methods - crack and crevice, void, spot, and general surface - are defined by placement and are limited by many food-handling labels.
The chosen method changes the calibration math, so a band or spot rate must be computed on treated area rather than total area.
Last updated: August 2026
7.2 Application Methods & Placement
40 CFR 171.103(c)(7) requires practical knowledge of the methods used to apply various formulations, of which method to use in a given situation , of how method selection produces proper use versus unnecessary or ineffective use or misuse, and of prevention of drift and pesticide loss into the environment . It also requires you to know that fumigation, aerial application, sodium cyanide, and sodium fluoroacetate require additional certification - in Ohio, categories 2F/10C/6D for fumigation and Category 1 for aerial.
Outdoor and Agricultural Methods
- Method What it is When it fits
- Broadcast Uniform coverage of an entire area Whole-field weed control, blanket turf applications
Band A strip over or beside the crop row, leaving the middles untreated Cuts product use in proportion to band width; row crops with in-row weed pressure
Spot treatment Small, targeted areas only Scattered weed escapes, isolated nests, IPM programs
Directed Aimed at the target while deliberately avoiding the crop or desirable plant Shielded or hooded sprayers between rows
Foliar Applied to leaves and stems Contact and systemic products taken up through foliage
Soil-applied: surface, incorporated, or injected Placed on or into soil Pre-emergence herbicides, soil insecticides, nematicides
In-furrow / seed treatment Applied with the seed or coated onto it Early-season protection with minimal total product
- Chemigation Applied through an irrigation system Requires backflow protection and label authorization
- Basal bark / cut stump / hack and squirt Applied to woody stems Brush and invasive species on rights-of-way
- Air-blast Air-carried spray into a canopy Orchards, large ornamentals; high drift potential
Aerial Fixed-wing, helicopter, or uncrewed aircraft Ohio Category 1 required for any pesticide by aircraft, including drones
- Fumigation Gas into soil, a structure, or a confined space Ohio categories 2F, 10C, or 6D only
- Structural and Interior Methods
Placement definitions matter here because many food-handling and school labels limit which are permitted.
Crack and crevice - a small amount of product placed directly into cracks, crevices, expansion joints, and voids where pests hide or enter. Typically permitted in food-handling establishments while in operation.
Void treatment - dust or aerosol injected into wall voids, equipment voids, and hollow spaces.
Spot treatment - a limited surface area, typically no more than about two square feet, treated where pests are found. Label definitions control.
General surface / broadcast interior - broad application to floors, walls, or turf-like interior surfaces; often prohibited in food areas.
Perimeter treatment - a band around the outside foundation and adjacent ground; many labels restrict the band width and the height on the structure.
Baiting - stations or gel placements that pests carry back or feed on; the preferred method in schools while in session under OAC 901:5-11-15.
Space treatment (fog, mist, ULV) - fine droplets dispersed into an enclosed airspace; requires vacating and ventilating.
Termiticide trench and rod / sub-slab injection - the soil treatment behind a termite job, requiring the OAC 901:5-11-10(A)(3) footprint drawing before application.
Choosing the Method
Ask four questions:
Where is the pest? Root feeders need soil placement; wall-void ants need void treatment; canopy mites need coverage that reaches leaf undersides.
What does the label permit at this site? Method and site restrictions are directions for use, not suggestions.
What is the least-exposure option that still works? Ohio's IPM standard requires determining, with the customer, the most effective measures and methods that control the pest while minimizing exposure to humans, domestic animals, and the environment.
What does the method do to off-target loss? Air-blast and aerial applications release spray high and into moving air. Soil incorporation and bait placement release almost nothing to the air.
Method Changes the Math
This is where applicators most often go wrong. The label rate is normally expressed per treated acre. If you band a 15-inch strip over rows on 30-inch centers, you are treating half the field area, so: Product per field acre = Broadcast rate × Band width Row spacing \text{Product per field acre} = \text{Broadcast rate} \times \frac{\text{Band width}}{\text{Row spacing}} Product per field acre = Broadcast rate × Row spacing Band width
A 2-pint-per-acre broadcast rate becomes 1 pint per field acre when banded at 15 inches on 30-inch rows - while the treated strip still receives the full 2-pint-per-treated-acre rate.
The same logic applies to spot treatment: a label rate stated per 1,000 square feet applies to the square footage actually treated , and applying full-area quantities to a partial area is an over-application and a violation.
Drift and Loss Prevention Built Into the Method
Use the coarsest droplet spectrum that still gives acceptable coverage for the product and target.
Keep the boom as low as correct overlap allows; boom height is the single largest ground-application drift variable after droplet size.
Reduce pressure to shift droplets coarser with conventional tips, or use air-induction tips designed for coarse spectra.
Use shields or hoods on directed applications near sensitive plants.
Leave a downwind buffer whenever the label specifies one, and increase it beyond the minimum when a sensitive site sits downwind.
Prefer soil-incorporated, in-furrow, bait, or void placements when they will do the job - drift you never create needs no mitigation.