Study guide
6.4 Toxicology, Signal Words & Hazard Communication
Ohio Commercial Pesticide Applicator Certification Exam
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Federal Pesticide Law & Regulation
1.1 FIFRA & Federal Regulatory Framework 1.2 Pesticide Registration, Classification & Restricted-Use Products 1.3 The Worker Protection Standard in Ohio 1.4 Federal Certification Standards & Supervising Noncertified Applicators 1.5 Professionalism, Chemical Security & Public Communication
2 Chapter 2: Ohio Pesticide Law - ORC Chapter 921
2.1 ORC Chapter 921 & the Authority of the Ohio Department of Agriculture 2.2 Who Must Hold an Ohio Commercial Applicator License 2.3 Private Applicators & Ohio's Private Pesticide-Use Categories 2.4 Trained Servicepersons & Direct Supervision in Ohio 2.5 Prohibited Acts, Disciplinary Action & Penalties
3 Chapter 3: Ohio Administrative Rules & Licensing Logistics
3.1 OAC Chapter 901:5-11: The Rule Map 3.2 The Ohio Exam Path: Core, Category Exams, Fees & Scheduling 3.3 The 26 Ohio Commercial Pesticide-Use Categories 3.4 Annual Renewal, the 3-Year Recertification Cycle & Reciprocity 3.5 Ohio Recordkeeping & Reporting Requirements 3.6 Pesticide Businesses, Dealers, Solicitors & Financial Responsibility
4 Chapter 4: Ohio Site-Specific Rules
4.1 Lawn Pesticide Notification & Posting (OAC 901:5-11-09) 4.2 Pesticide Use in Ohio Schools (OAC 901:5-11-15) 4.3 Ohio's Integrated Pest Management Standard (OAC 901:5-11-14) 4.4 Wood-Destroying Insect Diagnostic Inspections & Category 12
5 Chapter 5: Pests, Pest Biology & Integrated Pest Management
5.1 Pest Categories & Why Correct Identification Comes First 5.2 Insect & Related Arthropod Biology 5.3 Weed Biology, Life Cycles & Identification 5.4 Plant Diseases, Nematodes & Vertebrate Pests 5.5 Principles & Components of Integrated Pest Management 5.6 IPM Control Tactics & Resistance Management
6 Chapter 6: Pesticides, Formulations & Toxicology
6.1 Types of Pesticides & How They Act 6.2 Pesticide Formulations & Physical Properties 6.3 Adjuvants, Compatibility & the Jar Test 6.4 Toxicology, Signal Words & Hazard Communication 6.5 Routes of Exposure, Symptoms & First Aid 6.6 Chronic Health Effects, Cholinesterase Monitoring & Heat Stress 6.7 Personal Protective Equipment (PPE) & Respiratory Protection
7 Chapter 7: Application Equipment, Calibration & Handling
7.1 Planning the Application: Site Assessment & Pre-Application Checks 7.2 Application Methods & Placement 7.3 Application Equipment Types & Operation 7.4 Nozzles: Types, Sizing & Selection 7.5 Equipment Calibration Principles & Applied Calculations 7.6 Granular Spreader & Handgun Calibration 7.7 Mixing, Loading & Handling Operations 7.8 Step-by-Step Calibration & Math Scenarios
8 Chapter 8: Safety, Environment, Labels & Exam Readiness
8.1 Safe Storage, Transport & Facility Security 8.2 Spill Prevention, Containment & Waste Management 8.3 Pesticide Fate in the Environment 8.4 Protecting Groundwater & Surface Water in Ohio 8.5 Pesticide Drift Types & Mitigation Strategies 8.6 Protecting Non-Target Organisms, Pollinators & Wildlife 8.7 Pesticide Label Anatomy & Legal Status 8.8 Comprehensive Exam Review & Scenario Drills
6.4 Toxicology, Signal Words & Hazard Communication
Key Takeaways Explain This Topic AI
Acute toxicity measures immediate injury resulting from a single exposure, evaluated using LD50 (lethal dose 50% in mg/kg) and LC50 (lethal concentration 50% in mg/L) metrics.
LD50 has an inverse relationship with toxicity: a smaller numerical LD50 value signifies a much more toxic chemical requiring a tiny dose to cause fatality.
Front-panel Signal Words reflect EPA Toxicity Categories: DANGER-POISON with red/black skull and crossbones (Category I acute toxicity), DANGER (Category I skin/eye damage), WARNING (Category II), and CAUTION (Category III/IV).
OSHA Safety Data Sheets (SDSs) enforce a standardized 16-section format providing comprehensive technical, chemical, ecological, and emergency response information distinct from FIFRA product labels.
Last updated: August 2026
6.4 Toxicology, Signal Words & Hazard Communication
Toxicology is the study of how chemicals cause harmful biological effects in living organisms. Pesticide applicators must understand toxicological principles to accurately interpret product safety warnings, evaluate worker hazards, and implement appropriate protection protocols.
Acute vs. Chronic Toxicity
Pesticide toxicity is evaluated across two distinct temporal exposure frameworks:
Acute Toxicity: Harm caused by a single, discrete exposure or multiple exposures occurring within a 24-hour timeframe. Examples include chemical skin burns, sudden nausea, respiratory distress, or death following an accidental spray splash. Acute toxicity manifests rapidly (minutes to hours).
Chronic Toxicity: Harm resulting from repeated, long-term, low-dose exposure to a pesticide over months or years. Chronic health effects often feature long latency periods before clinical symptoms appear. Key chronic toxicity endpoints include:
Oncogenicity / Carcinogenicity: Tumor formation and cancer initiation.
Teratogenicity: Birth defects caused by fetal damage during pregnancy.
Mutagenicity: Genetic mutations and chromosomal damage.
Neurotoxicity: Progressive peripheral or central nervous system damage.
Reproductive Toxicity: Infertility, reduced sperm counts, or miscarriages.
Toxicity Metrics: LD50 and LC50
Toxicity is quantified experimentally using laboratory test animals (typically rats or rabbits) to determine lethal thresholds.
LD50 (Lethal Dose 50%): The statistical dose of a chemical required to kill 50% of a test animal population. Expressed in milligrams of pesticide active ingredient per kilogram of body weight (mg/kg) . LD50 values are determined separately for oral (ingested) and dermal (skin contact) routes.
LC50 (Lethal Concentration 50%): The concentration of a pesticide in air (or water for aquatic testing) that kills 50% of test animals during a specified exposure period (typically 4 hours). Expressed in milligrams per liter (mg/L) or parts per million (ppm) for inhalation exposures.
The Inverse Rule of LD50
CRITICAL EXAM PRINCIPLE: LD50 values operate inversely to toxicity severity. The LOWER the LD50 number, the MORE TOXIC the chemical. A pesticide with an oral LD50 of 10 mg/kg requires only a tiny fraction of a teaspoon to kill a human, whereas a pesticide with an LD50 of 5,000 mg/kg requires an entire quart.
EPA Toxicity Categories & Signal Words
The U.S. EPA assigns every registered pesticide product to one of four Acute Toxicity Categories based on its oral LD50, dermal LD50, inhalation LC50, and corrosive properties to skin and eyes. The Category dictates the mandatory Signal Word displayed prominently on the front panel of the label.
Toxicity Category Category Name Front Panel Signal Word Oral LD50 (mg/kg) Dermal LD50 (mg/kg) Inhalation LC50 (mg/L) Estimated Adult Fatal Dose (150 lb Human)
Category I Highly Toxic DANGER-POISON (with Skull & Crossbones) 0 – 50 0 – 200 0 – 0.2 A few drops to 1 teaspoon
Category I Highly Toxic (Corrosive) DANGER (without Skull/Crossbones) Irritation / Damage Severe Eye/Skin N/A Corrosive tissue destruction
- Category II Moderately Toxic WARNING 50 – 500 200 – 2,000 0.2 – 2.0 1 teaspoon to 1 ounce
- Category III Slightly Toxic CAUTION 500 – 5,000 2,000 – 20,000 2.0 – 20.0 1 ounce to 1 pint / pound
Category IV Practically Non-Toxic CAUTION (Optional per EPA rules) > 5,000 > 20,000 > 20.0 Greater than 1 pint / pound
Signal Word Rules
DANGER-POISON: Printed in bold uppercase letters accompanied by the symbol of a skull and crossbones printed in red or contrasting color. Applied to products with extreme acute systemic toxicity via oral, dermal, or inhalation routes.
DANGER: Used for Category I products that pose extreme localized hazards, such as irreversible eye destruction or skin necrosis, but do not possess high systemic lethality.
KEEP OUT OF REACH OF CHILDREN: Must appear on the front panel of ALL pesticide labels regardless of Toxicity Category.
Safety Data Sheets (SDS): 16-Section GHS Format
While the EPA pesticide label is a legal enforcement document under FIFRA, the Safety Data Sheet (SDS) is an occupational safety document mandated by OSHA under the Hazard Communication Standard (29 CFR 1910.1200) following the Globally Harmonized System (GHS).
Employers must maintain an accessible SDS for every hazardous chemical stored or used on-site. All modern SDSs follow a mandatory 16-section structure :
Section 1: Identification: Product name, manufacturer contact info, emergency phone number, and recommended uses.
Section 2: Hazard(s) Identification: GHS signal word, hazard statements, pictograms, and precautionary statements.
Section 3: Composition / Information on Ingredients: Chemical names, CAS numbers, and ingredient concentrations.
Section 4: First-Aid Measures: Essential first-aid instructions organized by exposure route, immediate symptoms, and clinical notes for treating physicians.
Section 5: Fire-Fighting Measures: Suitable extinguishing media, specific chemical hazards during combustion (toxic gases), and protective equipment for firefighters.
Section 6: Accidental Release Measures: Personal precautions, protective equipment, environmental spill containment, and cleanup procedures.
Section 7: Handling and Storage: Safe handling practices, ventilation requirements, and storage compatibility/temperature controls.
Section 8: Exposure Controls / Personal Protection: OSHA Permissible Exposure Limits (PELs), ACGIH TLVs, engineering controls, and specific required PPE.
Section 9: Physical and Chemical Properties: Appearance, odor, pH, flash point, vapor pressure, relative density, and solubility.
Section 10: Stability and Reactivity: Chemical stability, hazardous decomposition products, and incompatible substances.
Section 11: Toxicological Information: Acute and chronic toxicity data, LD50/LC50 values, carcinogenic listings (IARC, NTP, OSHA).
Section 12: Ecological Information: Ecotoxicity data for fish, aquatic invertebrates, birds, and honeybees; environmental persistence and soil mobility.
Section 13: Disposal Considerations: Proper waste disposal protocols for container rinsing and leftover chemical waste.
Section 14: Transport Information: UN proper shipping name, DOT hazard class, packing group, and marine pollutant status.
Section 15: Regulatory Information: SARA Title III reporting thresholds, TSCA status, state-specific rules.
Section 16: Other Information: SDS creation date, revision history, and hazard rating scales (NFPA / HMIS).