Study guide
8.1 BCSP Code of Ethics & Professional Conduct
Occupational Hygiene and Safety Technician OHST
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Exam Overview & Prep Strategy
1.1 OHST Exam Logistics, Blueprint & Scoring 1.2 Study Strategy & Test-Taking Tactics
2 Chapter 2: Hazard Identification, Risk Assessment & Incident Investigation
2.1 Job Safety Analysis (JSA) & Hazard Recognition 2.2 Risk Assessment Frameworks & Risk Matrix Calculations 2.3 Workplace Inspections & Safety Audits 2.4 Incident Investigation & Root Cause Analysis (RCA) 2.5 Human Factors & Ergonomic Hazard Analysis
3 Chapter 3: Hazard Control & Safety Engineering
3.1 Hierarchy of Controls & Safety Engineering Principles 3.2 Machine Guarding & Mechanical Hazards (OSHA 1910 Subpart O) 3.3 Electrical Safety & Lockout/Tagout (LOTO - OSHA 1910.147) 3.4 Fall Protection & Working at Heights (OSHA 1910 Subpart D / 1926 Subpart M) 3.5 Confined Space Entry & Permitting (OSHA 1910.146) 3.6 Personal Protective Equipment (PPE) Selection & Maintenance (OSHA 1910 Subpart I)
4 Chapter 4: Safety, Health & Environmental Programs
4.1 Safety Management Systems (ANSI/ASSP Z10, ISO 45001, OSHA VPP) 4.2 OSHA Recordkeeping & Injury Reporting (OSHA 300, 300A, 301) 4.3 Regulatory Compliance & OSHA Inspections / Citations 4.4 Hazard Communication & GHS SDS Management (OSHA 1910.1200) 4.5 Environmental Compliance & Waste Management (RCRA, CERCLA, CAA, CWA) 4.6 Contractor Safety & Management Systems
5 Chapter 5: Health Hazards & Industrial Hygiene
5.1 Chemical Hazards, Exposure Limits (PEL, TLV, REL) & Toxicology 5.2 Airborne Sampling, Air Monitoring & Direct-Reading Instruments 5.3 Physical Hazards: Noise, Hearing Conservation & Radiation 5.4 Thermal Stress, Ventilation Systems & Indoor Air Quality 5.5 Biological Hazards, Bloodborne Pathogens & Infection Control
6 Chapter 6: Organizational Communication, Training & Business
6.1 Adult Learning Principles & Safety Training Development 6.2 Training Delivery, Evaluation & Documentation 6.3 Safety Culture, Organizational Change & Worker Engagement 6.4 Safety Management Communication & Reporting Techniques 6.5 Safety Program ROI, Cost-Benefit Analysis & Financial Justification
7 Chapter 7: Safety Math, Emergency Preparedness & Fire Protection
7.1 Safety Mathematics, Units & Unit Conversion Calculations 7.2 Incident Rate Calculations & Applied Statistics 7.3 Emergency Action Plans (EAP) & Incident Command System (ICS) 7.4 Fire Prevention, Fire Protection Systems & Workplace Security
8 Chapter 8: Ethics & BCSP Professional Standards
8.1 BCSP Code of Ethics & Professional Conduct 8.2 Ethical Decision-Making & Conflict of Interest Scenarios 8.3 Professional Responsibilities & Continuing Recertification
8.1 BCSP Code of Ethics & Professional Conduct
Key Takeaways Explain This Topic AI
The primary obligation of an OHST is the protection of public health, safety, and welfare.
OHST professionals must maintain honesty and objectivity in all professional reports and statements.
Continuing professional competence is required to stay current with safety regulations and standards.
Confidentiality must be maintained regarding employer or client business affairs unless disclosure is required by law.
Last updated: July 2026
BCSP Code of Ethics & Professional Conduct
The Board of Certified Safety Professionals (BCSP) Code of Ethics is the cornerstone of professional conduct for all Occupational Hygiene and Safety Technicians (OHST). Adherence to this code is not merely a recommendation; it is a mandatory requirement for maintaining certification. The code provides a framework for resolving ethical dilemmas and ensures that the safety profession maintains its integrity and public trust.
1. Protection of Public Health, Safety, and Welfare
The most paramount principle in the BCSP Code of Ethics is the obligation to protect the public. An OHST's primary responsibility is to ensure that workplaces are safe and that the health and welfare of employees and the public are not compromised by hazardous conditions.
The Hierarchy of Responsibility
When conflicts arise, the safety of the public and workers always supersedes the financial interests of the employer or the personal interests of the safety professional. If an OHST discovers a condition that poses an imminent danger to life or health, they have an ethical duty to take action to correct the hazard, even if it requires halting operations or blowing the whistle on their employer (if internal channels fail).
2. Honesty and Objectivity
OHST professionals are expected to be completely honest and objective in all professional endeavors. This means that all reports, statements, and testimony must be based on facts and sound safety engineering principles, not on opinions or pressure from management.
Falsification of Data
One of the most severe ethical violations is the falsification of inspection or sampling data. For example, if an OHST conducts air sampling for silica and the results exceed the Permissible Exposure Limit (PEL), altering the data to show compliance is a direct violation of the Code of Ethics and can result in the revocation of certification.
3. Maintaining Professional Competence
The field of occupational health and safety is constantly evolving, with new hazards, technologies, and regulations emerging regularly. The BCSP Code of Ethics mandates that certificants only perform services in areas where they are competent.
Scope of Practice
An OHST should never accept an assignment or provide advice on a topic outside their area of expertise. If an OHST is asked to evaluate a complex ergonomic issue that requires the expertise of a Certified Professional Ergonomist (CPE), they should acknowledge their limitations and recommend that the employer hire a qualified specialist.
4. Confidentiality
Safety professionals often have access to sensitive information about an employer's business operations, trade secrets, or employee medical records. The Code of Ethics requires OHSTs to maintain the confidentiality of this information.
Exceptions to Confidentiality
Confidentiality is not absolute. An OHST must disclose confidential information if required by law or if withholding the information would result in an imminent threat to public health or safety. For instance, if an employer is illegally dumping hazardous waste and refuses to stop, the OHST may be legally and ethically required to report the violation to the EPA, overriding the duty of confidentiality.
5. Conflict of Interest
OHST professionals must avoid conflicts of interest, both real and perceived. A conflict of interest occurs when a professional's personal interests could compromise their judgment or objectivity.
Financial Conflicts
For example, if an OHST is responsible for purchasing personal protective equipment (PPE) for their company, they should not buy from a supplier owned by a family member unless they have fully disclosed the relationship and received approval from management.
Ethical Dilemma Scenario: The Pressured Technician
Scenario: Sarah, an OHST, is conducting a routine safety inspection of a manufacturing facility. She discovers several blocked fire exits. When she reports this to the plant manager, he tells her not to document the violation because they have an important corporate audit the next day, and a clean report is necessary for his bonus.
Ethical Analysis: Sarah must document the blocked fire exits. Failing to do so violates the principles of honesty, objectivity, and the paramount duty to protect worker safety. The plant manager's financial interests cannot override the safety of the employees.
Summary Table: BCSP Core Ethical Principles
Principle Description Practical Application
Public Safety Protect health, safety, and welfare of the public and workers. Halting operations if an imminent danger exists.
Honesty Be truthful and objective in all professional reports and statements. Accurately reporting all safety hazards found during inspections.
Competence Only perform services in areas of proven competence. Declining to conduct a specialized hygiene assessment if untrained.
Confidentiality Protect employer/client secrets unless disclosure is required by law. Keeping proprietary manufacturing processes confidential.
Conflict of Interest Avoid situations that compromise professional judgment. Disclosing any financial ties to safety equipment vendors.
By adhering to these principles, OHST professionals uphold the integrity of the certification and ensure that workplaces remain safe for everyone.