Study guide
2.2 Risk Assessment Frameworks & Risk Matrix Calculations
Occupational Hygiene and Safety Technician OHST
Track your progress as you read
Finished sections get a check mark.
1 Chapter 1: Exam Overview & Prep Strategy
1.1 OHST Exam Logistics, Blueprint & Scoring 1.2 Study Strategy & Test-Taking Tactics
2 Chapter 2: Hazard Identification, Risk Assessment & Incident Investigation
2.1 Job Safety Analysis (JSA) & Hazard Recognition 2.2 Risk Assessment Frameworks & Risk Matrix Calculations 2.3 Workplace Inspections & Safety Audits 2.4 Incident Investigation & Root Cause Analysis (RCA) 2.5 Human Factors & Ergonomic Hazard Analysis
3 Chapter 3: Hazard Control & Safety Engineering
3.1 Hierarchy of Controls & Safety Engineering Principles 3.2 Machine Guarding & Mechanical Hazards (OSHA 1910 Subpart O) 3.3 Electrical Safety & Lockout/Tagout (LOTO - OSHA 1910.147) 3.4 Fall Protection & Working at Heights (OSHA 1910 Subpart D / 1926 Subpart M) 3.5 Confined Space Entry & Permitting (OSHA 1910.146) 3.6 Personal Protective Equipment (PPE) Selection & Maintenance (OSHA 1910 Subpart I)
4 Chapter 4: Safety, Health & Environmental Programs
4.1 Safety Management Systems (ANSI/ASSP Z10, ISO 45001, OSHA VPP) 4.2 OSHA Recordkeeping & Injury Reporting (OSHA 300, 300A, 301) 4.3 Regulatory Compliance & OSHA Inspections / Citations 4.4 Hazard Communication & GHS SDS Management (OSHA 1910.1200) 4.5 Environmental Compliance & Waste Management (RCRA, CERCLA, CAA, CWA) 4.6 Contractor Safety & Management Systems
5 Chapter 5: Health Hazards & Industrial Hygiene
5.1 Chemical Hazards, Exposure Limits (PEL, TLV, REL) & Toxicology 5.2 Airborne Sampling, Air Monitoring & Direct-Reading Instruments 5.3 Physical Hazards: Noise, Hearing Conservation & Radiation 5.4 Thermal Stress, Ventilation Systems & Indoor Air Quality 5.5 Biological Hazards, Bloodborne Pathogens & Infection Control
6 Chapter 6: Organizational Communication, Training & Business
6.1 Adult Learning Principles & Safety Training Development 6.2 Training Delivery, Evaluation & Documentation 6.3 Safety Culture, Organizational Change & Worker Engagement 6.4 Safety Management Communication & Reporting Techniques 6.5 Safety Program ROI, Cost-Benefit Analysis & Financial Justification
7 Chapter 7: Safety Math, Emergency Preparedness & Fire Protection
7.1 Safety Mathematics, Units & Unit Conversion Calculations 7.2 Incident Rate Calculations & Applied Statistics 7.3 Emergency Action Plans (EAP) & Incident Command System (ICS) 7.4 Fire Prevention, Fire Protection Systems & Workplace Security
8 Chapter 8: Ethics & BCSP Professional Standards
8.1 BCSP Code of Ethics & Professional Conduct 8.2 Ethical Decision-Making & Conflict of Interest Scenarios 8.3 Professional Responsibilities & Continuing Recertification
2.2 Risk Assessment Frameworks & Risk Matrix Calculations
Key Takeaways Explain This Topic AI
Risk is the product of the probability of an event occurring and the severity of its consequences.
A Risk Assessment Matrix provides a visual and standardized method for categorizing risk levels.
Risk Assessment Code (RAC) systems, such as MIL-STD-882E, prioritize risks for management action.
Residual risk is the level of risk remaining after all control measures have been implemented.
Last updated: July 2026
- Risk Assessment Frameworks & Risk Matrix Calculations
- The Core Concept of Risk
While hazard recognition identifies the potential for harm, risk assessment evaluates the likelihood and severity of that harm actually occurring. In occupational safety, the fundamental formula for risk is:
Risk = Probability (or Likelihood) × Severity (or Consequence)
An OHST must be able to differentiate between hazard and risk. For example, a bottle of concentrated sulfuric acid is a hazard. The risk associated with that hazard is very low if the bottle is securely stored in an approved, locked cabinet. However, the risk becomes very high if the bottle is open on a busy workbench where it could easily be knocked over.
The Risk Assessment Matrix
A Risk Assessment Matrix is a visual tool used to evaluate and categorize risks based on their probability and severity. It allows organizations to prioritize hazards, ensuring that the most critical risks receive immediate attention and resources.
Defining Severity
Severity refers to the worst credible consequence should an incident occur. While definitions vary by organization, a standard classification system (often modeled after military standards like MIL-STD-882E) includes:
Catastrophic: Death, permanent total disability, significant environmental damage, or immense financial loss.
Critical: Permanent partial disability, severe injury or occupational illness, major system damage.
Marginal: Minor injury or illness resulting in days away from work, minor system damage.
Negligible: First aid injury or illness, minimal environmental or system impact.
Defining Probability
Probability assesses the likelihood that the hazard will result in an incident. Common classifications include:
A - Frequent: Likely to occur continuously or frequently during the life cycle of the system/process.
B - Probable: Will occur several times.
C - Occasional: Likely to occur sometime.
D - Remote: Unlikely, but possible to occur.
E - Improbable: So unlikely, it can be assumed occurrence may not be experienced.
Constructing the Risk Assessment Code (RAC)
By combining the severity category and the probability level, a Risk Assessment Code (RAC) is generated. The RAC dictates the required level of management action.
- Severity / Probability A (Frequent) B (Probable) C (Occasional) D (Remote) E (Improbable)
- 1 (Catastrophic) High High High Medium Low
- 2 (Critical) High High Medium Medium Low
- 3 (Marginal) High Medium Medium Low Low
- 4 (Negligible) Medium Low Low Low Low
- Interpretation of RAC Levels
High Risk (Unacceptable): Immediate action required. The operation must be halted until controls are implemented to reduce the risk to an acceptable level. Requires senior management visibility.
Medium Risk (Tolerable with Controls): Action required to implement controls. The operation may proceed, but strict monitoring and administrative controls must be in place. Requires mid-level management review.
Low Risk (Acceptable): No immediate significant action required, though continuous improvement efforts should seek to eliminate the hazard if possible. Managed by routine procedures.
Initial Risk vs. Residual Risk
A critical concept in risk assessment is the difference between initial and residual risk:
Initial Risk (or Baseline Risk): The level of risk assessed before any new controls or mitigation measures are applied. It represents the inherent risk of the activity.
Residual Risk: The level of risk remaining after all planned controls and mitigation measures have been implemented and verified.
The goal of the OHST and the safety program is to drive the residual risk down to an acceptable level (typically Medium or Low, depending on the organization's risk tolerance). If the residual risk remains High after all feasible controls are applied, the activity may need to be fundamentally redesigned or abandoned entirely.
Quantitative vs. Qualitative Risk Assessment
Risk matrices are generally considered semi-quantitative or qualitative . They rely on categorical data and expert judgment.
Quantitative Risk Assessment (QRA) uses complex mathematical models, failure rate databases, and statistical analysis to calculate numerical probabilities (e.g., a 1 × 10 − 6 1 \times 10^{-6} 1 × 1 0 − 6 chance of fatality per year). QRAs are heavily used in high-hazard industries like nuclear power and chemical processing (e.g., Process Safety Management). While an OHST may assist in gathering data for a QRA, they are more frequently tasked with conducting standard qualitative matrix assessments for daily operational tasks.
The ALARP Principle
Many regulatory frameworks and international standards utilize the concept of ALARP —As Low As Reasonably Practicable. This principle acknowledges that zero risk is often unachievable. Instead, risks must be reduced to a level where the cost (in terms of time, money, or effort) of further reduction is grossly disproportionate to the safety benefit gained. Calculating ALARP requires a careful balancing act and a thorough understanding of both the risk matrix and the available control technologies.