Study guide

9.2 Wigs, Hairpieces and Hair Additions

Oklahoma Cosmetology License Study Guide Exam

Track your progress as you read

Finished sections get a check mark.

1 Oklahoma Board, Hours & Exam Process

1.1 Oklahoma State Board Governance, Powers & Statutes 1.2 Eligibility, Chemical vs Nonchemical Hours & Apprenticeship 1.3 Exam Process: Board Application, Prov NIC Theory & Board Practical

2 Renewal, Establishments, Scope & Ethics

2.1 Biennial Renewal, Fees & Reciprocity 2.2 Establishment Licensing, Inspections & Posting 2.3 Scope of Practice, Specialty Licenses & HB 2141 Carve-Outs 2.4 Professional Ethics, Client Communication & Inspection Conduct

3 Infection Control Foundations

3.1 Microbiology, Pathogens & Modes of Transmission 3.2 Cleaning, Disinfection & Sterilization 3.3 Cross-Contamination, Single-Use vs Multi-Use Items 3.4 Blood Exposure Incidents & Universal Precautions

4 OSHA, EPA & Cosmetology Chemistry

4.1 OSHA, EPA, Hazard Communication & SDS 4.2 Matter, the pH Scale & Product Chemistry 4.3 Cosmetic Ingredients, Mixing Rules & Interactions 4.4 Chemical Reactions, Overexposure & Burns

5 Muscles, Joints & Body Systems

5.1 Muscles and Joints of the Head and Face 5.2 Muscles and Joints of the Arms, Hands, Legs and Feet 5.3 Nervous and Circulatory Systems in Cosmetology

6 Trichology, Disorders & Client Consultation

6.1 Hair and Scalp Structure, Composition & Growth Cycles 6.2 Hair and Scalp Disorders, Diseases & Service Contraindications 6.3 Hair Analysis: Texture, Porosity, Elasticity & Density 6.4 Client Consultation, Predisposition/Strand Tests & Records

7 Hair Tools, Draping, Shampoo & Scalp Care

7.1 Hair Equipment, Implements, Supplies & Disinfection 7.2 Electrical Tools, Safety & Ergonomics 7.3 Draping, Shampooing & Conditioning 7.4 Scalp Treatments, Massage & Texture-Based Hair Care

8 Haircutting, Wet Styling & Thermal Styling

8.1 Haircutting Geometry: Angles, Elevations & Guidelines 8.2 Haircutting Techniques: Shears, Razor, Clipper & Texturizing 8.3 Wet Hairstyling Principles and Procedures 8.4 Thermal Styling Principles and Procedures

9 Natural Styling, Hair Enhancements & Design Principles

9.1 Natural Hair Styling and Braiding 9.2 Wigs, Hairpieces and Hair Additions 9.3 Balance, Facial Shape & Texture-Based Design

10 Haircolor and Lightening

10.1 Color Theory, the Law of Color & Natural Pigment 10.2 Haircolor Categories & Hydrogen Peroxide Developers 10.3 Lighteners, Decolorizing Stages & Toners 10.4 Formulation, Application (Virgin, Retouch, Foil, Balayage) & Correction

11 Chemical Texture Services

11.1 Chemical Texture Chemistry & Disulfide Bond Restructuring 11.2 Permanent Waving: Alkaline, Acid & Non-Thio Systems 11.3 Relaxers, Curl Reduction & Keratin Smoothing 11.4 Texture Safety, Client Protection & Products by Hair Type

12 Skin Science, Analysis & Facials

12.1 Skin Anatomy, Histology & Functions 12.2 Skin Types, Analysis, Consultation & Records 12.3 Skin Disorders, Diseases & Contraindications 12.4 Basic Facials, Massage Manipulations & Electrical Skin Equipment

13 Hair Removal, Makeup & Skin-Care Tools

13.1 Temporary Hair Removal Techniques 13.2 Basic Makeup Application 13.3 Skin-Care Tools, Infection Control & Ergonomics

14 Nail Care and Enhancements

14.1 Nail Anatomy, Physiology & Growth 14.2 Nail Disorders, Diseases & Contraindications 14.3 Manicure, Pedicure & Pedicure-Basin Sanitation 14.4 Nail Enhancements, Tools & Oklahoma MMA Rules

9.2 Wigs, Hairpieces and Hair Additions

Key Takeaways Explain This Topic AI

Cap wigs sit on a closed mesh-fiber base; capless wigs are wefted with open rows and more ventilation

Conventional synthetic fiber is commonly limited to a typical manufacturer window of about 175–200°F — textbook and label guidance, not Oklahoma law

Hair-addition methods listed in national theory include taping, bonding, fusion, and linking; Oklahoma names synthetic tape, keratin bonds, and fusion bonds as chemical jointing outside hairbraiding

Oklahoma does not create a separate wig license; wig work is part of licensed cosmetology or, without chemical jointing, may fall under statutory hairbraiding

Wig blocks are cleaned work surfaces; non-porous tools are cleaned then disinfected, and worn pieces and opened fiber packs are not shared between clients

Last updated: September 2026

Hair enhancements solve fashion, medical, religious, and convenience needs. Oklahoma does not create a separate “wig license.” Cosmetologists perform wig and addition work as part of licensed hair services. People who solely practice statutory hairbraiding may make wigs from hair, fibers, or extensions under 59 O.S. § 199.1 , but chemical jointing (synthetic tape, keratin bonds, fusion bonds) is carved out of that occupation. Do not invent a Board wig credential the Act does not create.

National theory still lists wigs and hairpieces and hair additions (taping, bonding, fusion, linking) under hair design. Independent ExamFinch covers those methods as service knowledge a license candidate is expected to understand — including when Oklahoma law puts a method outside unlicensed braiding.

Cap versus capless construction

Cap wigs are built on an elasticized mesh-fiber base that covers the head. Hair is attached across that cap (often hand-tied or a combination). The cap conceals the client’s own hair more completely, feels more secure for many wearers, and is a common choice when the client has little hair, is wearing the wig for medical reasons, or needs a closed base. Cap wigs run warmer and usually need pinning (and sometimes adhesive or tape at the perimeter) to stay registered to the head.

Capless wigs (also called wefted or open-cap wigs) are typically machine-made . Hair is sewn into wefts — strips of hair stitched along one edge — and those wefts are sewn in rows with open spaces between them. Air moves through the openings, so the wig is lighter and cooler . The client’s own hair can peek through if density is low; capless construction is often chosen for fashion wigs on clients who still have hair and want ventilation.

  • Feature Cap wig Capless wefted wig
  • Base Closed mesh-fiber cap Open rows of wefts
  • Typical manufacture Often includes hand-tied options Commonly machine-made
  • Ventilation Warmer; less airflow Cooler; more airflow
  • Concealment of natural hair Higher Lower unless density is built up
  • Common attachment Pins; sometimes tape or adhesive Pins, combs, elastic adjustable tabs

A weft is the strip itself — the building unit for capless wigs, sew-in weaves, and many tape-in systems. Integration hairpieces have an opening in the base so the client’s own hair is pulled through and blended; they add density rather than fully covering. A toupee is a hairpiece, historically associated with men’s work, designed to cover a bald or thinning area rather than the entire head; attachment may use tape, clips, adhesive, or a combination. Fit still follows head form: front hairline, occipital curve, and ear-to-ear balance. Measure front hairline to nape and ear to ear over the apex rather than guessing from a box size.

Human hair versus synthetic fiber

Human-hair wigs and pieces behave more like hair: they can often be colored (with strand tests), chemically waved or relaxed by a qualified professional, and styled with thermal tools using heat-protectant logic similar to a haircut. They react to humidity , can frizz, and usually cost more. They also require more ongoing styling because they do not hold a factory set the way many synthetics do. Human hair goods may be cuticle (turned) hair , with cuticles facing the same direction (smoother, more expensive), or fallen hair collected from combs and brushes with mixed cuticle direction (more tangling, usually cheaper).

Synthetic fiber is generally less expensive, holds the manufacturer’s set , and is not colored with standard oxidative haircolor. Conventional synthetic fiber is heat-sensitive. Cosmetology textbooks commonly cite a typical manufacturer styling range of about 175–200°F (79–93°C) for ordinary synthetic fiber before the fiber distorts, frizzes permanently, or melts. That range is manufacturer and textbook guidance, not an Oklahoma statute and not a Board temperature rule. Some fibers are sold as “heat-friendly”; those products publish their own ceiling on the package. Always read the fiber label rather than assuming every synthetic matches the conventional window. Independent ExamFinch treats 175–200°F as the conventional textbook window , not as Oklahoma law.

Fiber Styling and chemical behavior Care implication

Human hair Thermal tools and many chemical services possible with professional judgment Shampoo and condition like hair; humidity-sensitive; store on a block

Conventional synthetic Factory set; typical manufacturer heat window about 175–200°F Cool or lukewarm water; wig shampoo; avoid oxidative color; limited heat

  • Blend Mixed behavior — test a hidden weft Follow the most heat-sensitive fiber in the mix
  • Hair additions: taping, bonding, fusion, linking

Theory groups strand- or weft-addition methods separately from full wigs. National theory examples include:

Taping. Wefts with medical-grade adhesive tape are sandwiched to the client’s hair (or to a second weft). Wear time is finite; oil and sweat degrade tape. Removal uses the manufacturer’s solvent — never rip . Oklahoma: synthetic tape is a chemical hair jointing agent listed outside hairbraiding.

Bonding. Liquid adhesive attaches a weft at the base. Bonding is relatively fast for a full-head weft application. Residue and skin allergy are consultation issues. Removal is with the designated adhesive remover, not dry force.

Fusion. A keratin or similar protein bond is melted (or, in some systems, ultrasonic-welded) to attach a small strand, often a keratin-tipped extension, to a matching section of the client’s hair. Fusion can look very natural in small sections. Heat and solvent during removal must break the bond , not the client’s hair. Oklahoma: keratin bonds and fusion bonds are named chemical jointing agents outside the unlicensed braiding occupation.

Linking. Also taught as micro-link, micro-ring, or I-tip style attachment: a small metal or lined ring is crimped around the client’s hair and the extension strand. No melted keratin is required. Incorrect crimp pressure can cut the hair; links must be repositioned as the hair grows so they do not slide into a tangle at the scalp.

Sew-in weaves (braid base plus weft sewn to cornrows) use braiding plus sewing , not chemical jointing. Clip-in wefts are temporary and generally client-removable. Bonding adhesive on an inflamed or broken scalp is a stop — infection control and skin integrity come first.

Maintenance, removal, and the wig block

Cleanse human-hair pieces on a wig block or in a basin with products intended for hair or wigs; condition mid-lengths and ends; blot; allow to dry on the block so the cap keeps shape. Synthetic pieces: cool water, wig shampoo, no regular oxidative color, air dry on the block away from radiators and direct sun. Pin the wig at the nape and sides so the front hairline does not stretch. A stocking cap or wig cap on the client keeps natural hair flat and creates a clean surface under a full wig.

Removal always protects the client’s own hair :

  • Tape: solvent along the tape line, support the weft, slide off
  • Bond: manufacturer remover; do not force a dry weft

Fusion: dedicated bond breaker or the system’s solvent; crush or soften the keratin bead, then slide; comb out residue

Linking: opening pliers on the bead, slide the extension out; never yank a locked ring through a knot

Infection control: a wig block (canvas-covered preferred for T-pins; foam used for display) is a work surface , not a sterile implant. Wipe and clean the block between clients; do not park a worn medical wig on a dusty, hair-covered block. T-pins, clips, needles, weaving tools, pliers, and combs that touch hair and scalp go through the salon’s clean-then-disinfect cycle for non-porous tools. Porous blocks and canvas covers are not soaked in disinfectant like metal shears; keep them clean, replace covers that cannot be kept sanitary, and use a fresh liner or clean drape when a client’s piece must sit on the block. Never borrow another client’s wig cap, stocking cap, or unwashed extension pack. Store pieces in a clean bag or on a covered stand.

If the client has scalp infection, open lesions, or infestation, do not install additions until the condition is addressed. Enhancements sit on skin and hair — they are not an exception to infection-control theory. After removal, check the scalp for tape rash, broken hairs at fusion sites, and traction along braid-and-sew tracks.

Oklahoma scope reminder

A person working only inside statutory hairbraiding may braid, weave, lock, and make fiber wigs without a cosmetology license. The moment the service uses synthetic tape, keratin bonds, or fusion bonds , or applies dye or structural chemicals , that person has left the exemption. There is still no Oklahoma-only wig license to apply for — the fork is cosmetology (or other appropriate) licensure versus staying inside hairbraiding .

Typical manufacturer heat guidance for wig fibers (not Oklahoma law)