Study guide
3.5 Alarm Contracts, Consumer Disclosures & Contract Law Basics
Oklahoma Fire Alarm Installer License Study Guide Exam
Track your progress as you read
Finished sections get a check mark.
1 Oklahoma Licensing Laws & Administrative Authority
1.1 Oklahoma Alarm, Locksmith, and Fire Sprinkler Industry Act (59 O.S. § 1800) 1.2 Regulatory Authority of the Oklahoma Department of Labor (ODOL) 1.3 Alarm, Locksmith, and Fire Sprinkler Industry Committee 1.4 Exam Format, Fees & the ODOL Licensing Path (Assessment 4011)
2 License Classes, Trainee Supervision & Company Rules
2.1 Licensing Classifications — Company, Manager, Technician, Salesperson 2.2 Trainee Licensing, 15-Day Application Window & OSBI Background Checks 2.3 Trainee Direct Supervision & 3:1 Job Site Ratio Limits
3 ODOL Operational Compliance, Renewals & Enforcement
3.1 Vehicle Identification Standards & Pocket License Display 3.2 Annual License Renewal Schedule, Grace Periods & Fees 3.3 Violations, Unlawful Practices, Misdemeanors & Administrative Fines 3.4 Oklahoma Commercial Fire Alarm Tagging (OAC 380:75-5-1) 3.5 Alarm Contracts, Consumer Disclosures & Contract Law Basics
4 Fire Alarm Codes, Standards & Building Life Safety
4.1 NFPA 72 National Fire Alarm and Signaling Code Overview 4.2 IBC Chapter 9 & NFPA 101 Occupancy Requirements 4.3 Dedicated Function Systems & Emergency Control Interfaces
5 NEC Article 760 & Wiring Methods
5.1 Power-Limited vs. Non-Power-Limited Fire Alarm Circuits 5.2 Fire Alarm Cable Ratings, Markings & Substitution Hierarchy 5.3 Wiring Installation Methods, Raceways & 2-Inch Physical Separation
6 Electrical Fundamentals & Fire Alarm Calculations
6.1 Ohm's Law, Power Law & DC Circuit Analysis 6.2 Secondary Power & Battery Standby Calculations with 20% Derating 6.3 Voltage Drop Calculations on Notification Appliance Circuits 6.4 Electrical Components & Equipment Identification 6.5 Grounding, Bonding & Ground Loops (NEC Articles 90, 110, 250)
7 Circuit Pathways, Classes & Fault Troubleshooting
7.1 NFPA 72 Circuit Classifications — Class A, Class B, Class X, Class N 7.2 End-of-Line Resistors & Circuit Supervision 7.3 Multimeter Diagnostics, Ground Faults & Circuit Troubleshooting
8 Initiating Devices — Smoke & Heat Detection
8.1 Smoke Detection Technologies — Photoelectric, Ionization & Air Sampling 8.2 Smoke Detector Spacing, Ceilings & Environmental Factors 8.3 Heat Detectors — Fixed Temperature & Rate-of-Rise Principles
9 Specialty Initiating Devices & Sprinkler Monitoring
9.1 Duct Smoke Detectors, Sampling Tubes & Airflow Velocity 9.2 Manual Fire Alarm Boxes & Pull Station Requirements 9.3 Waterflow Switches & Sprinkler Supervisory Devices
10 Notification Appliances & Emergency Communications
10.1 Audible Notification Requirements, dBA Levels & 520 Hz Low-Frequency Sounders 10.2 Visual Notification Appliances, Strobe Candela & Synchronization 10.3 Supervising Station Alarm Systems & Communication Methods
11 FACU Hardware, Addressable Modules & Installation
11.1 Fire Alarm Control Units (FACU) & Dedicated Branch Circuits 11.2 Addressable Modules — Monitor, Control, Relay & Fault Isolators 11.3 Firestopping Systems & Cable Penetrations through Rated Barriers 11.4 Manufacturer Specifications, Equipment Listings & Field Compatibility 11.5 Project Plans, Blueprints & Specifications
12 Commissioning, Periodic ITM, Impairments & Job Safety
12.1 System Commissioning, Acceptance Testing & Records of Completion 12.2 Periodic Inspection, Testing, and Maintenance (NFPA 72 Table 14.4.3.2) 12.3 Impairment Handling, Deficiency Tags & Fire Watch Protocols 12.4 OSHA Job-Site Safety — Fall Protection, Ladder Rules & Electrical PPE 12.5 Hand Tools, Power Tools & Job-Site Equipment 12.6 Job-Site Injuries, Health Conditions & First-Aid Response
3.5 Alarm Contracts, Consumer Disclosures & Contract Law Basics
Key Takeaways Explain This Topic AI
OAC 380:75-3-2(d) requires the company license number on contracts, bids, estimates, invoices, advertising, and any publicly accessible website.
Monitoring and lease contracts must disclose the initial term, renewal term, cancellation terms and costs, company and salesperson license numbers, and the service address.
Military early-termination clauses, or their absence, must be disclosed in writing and separately acknowledged by the customer.
OAC 380:75-3-4(1)(J) requires returning the central station monitoring programming code to factory default within 48 hours when a consumer cancels a contract on customer-owned equipment.
Under 59 O.S. § 1800.11 the licensee is responsible for employee conduct within the scope of employment.
Last updated: September 2026
3.5 Alarm Contracts, Consumer Disclosures & Contract Law Basics
Duty A of the Oklahoma technician blueprint lists "Demonstrate basic knowledge of contract law" as an explicit task. Technicians rarely negotiate contracts, but they are routinely the person on site when a customer says "that wasn't in the agreement," and Oklahoma writes several contract obligations directly into the licensing rules — with the company's license, not just its invoice, on the line.
The Five Elements of an Enforceable Contract
- Element What It Means on an Alarm Job
- Offer The company's written proposal: scope of work, device counts, panel model, price
- Acceptance The customer's signature or documented assent to that specific proposal
- Consideration Something of value exchanged both ways — the system and labor for the contract price
- Capacity The signer must have legal authority; a tenant usually cannot bind the building owner
Legality The work and the party performing it must be lawful — an unlicensed installer's alarm contract is unenforceable in Oklahoma
A breach is a failure to perform a contractual promise. Remedies include damages, specific performance, or rescission. Warranties come in two flavors: an express warranty is stated in writing ("one year parts and labor"), while an implied warranty arises by operation of law (that the work is fit for its ordinary purpose and performed in a workmanlike manner). A change order is a written amendment; verbal "while you're here, add two strobes" instructions that never reach paper are the single most common source of alarm-contract disputes.
Oklahoma's License-Number Disclosure Rule
Under OAC 380:75-3-2(d) , while actively engaged in any regulated activity, a company must place its state-issued company license number — or a statement referring to a website or toll-free number where licensing information can be obtained — on all advertising and marketing materials , expressly including:
- Letterhead stationery, business cards, invoices, and statements
- Contracts, bids, and estimates
- Printed and electronic-media advertisements, decals, and yard signs
The license number must also be prominently displayed on any publicly accessible website , either on the home page or on every page advertising a regulated product or service. A bid that omits the license number is a rule violation before a single wire is pulled.
Minimum Contract Disclosures on Monitoring and Lease Agreements
OAC 380:75-3-3(1)(E) governs monitoring and lease contracts in the alarm industry. This matters to fire alarm technicians because OAC 380:75-3-4(3)(E) requires any licensed fire alarm technician who engages in residential systems to also be licensed as a burglar alarm technician, which places that work squarely under the burglar alarm rule. Every monitoring and/or lease contract must disclose, at minimum:
- The initial term of the agreement
- The renewal term of the agreement
- The terms for notification of cancellation , and the costs involved in all terms of the agreement
- The company name and state-issued license number
- The sales representative's name and state-issued license number
- The address where service will be provided
Any early-termination clause applicable to military personnel — or the absence of such a clause — must be fully disclosed in writing and separately acknowledged by the customer .
These disclosures must be delivered in one of three prescribed ways: printed on the front or face of the written contract in not less than 12-point bold type and at least two points larger than the rest of the contract text; on a separate disclosure form appended to the contract, dated and signed by both the customer and the licensed company representative who made the sale; or electronically, in understandable language, in bold type at least two points larger than the remaining text.
The 48-Hour Programming-Code Rule
OAC 380:75-3-4(1)(J) is a fire-alarm-specific consumer protection. When a consumer cancels the contract on customer-owned equipment , the fire alarm company must — upon request from the consumer — return the central station monitoring programming code to the factory default setting within forty-eight (48) hours . If a system is installed without a written contract with the consumer, the central station monitoring programming code must simply be set at default from the start.
Warning
Locking a customer out of equipment they own is not a permissible collection tactic in Oklahoma. The rule exists precisely to stop companies from holding a paid-for panel hostage after a contract ends.
Vicarious Responsibility of the Licensee
59 O.S. § 1800.11 makes the licensee responsible to the Alarm, Locksmith and Fire Sprinkler Industry Committee for the conduct of business activities and for the activities of the licensee's employees. Improper conduct by an employee within the scope of employment may be considered by the Committee as acts of the licensee . A technician who promises an unapproved discount or signs a scope change on a customer's kitchen counter can create liability that attaches to the company's license.
False Alarms and Municipal Charges
59 O.S. § 1800.12 authorizes any municipality or county to levy and collect reasonable charges for alarm installation connections at a police or fire department it owns, operates, or monitors, and to require discontinuance of service of any alarm device that causes excessive false alarms due to mechanical malfunction or faulty equipment. The jurisdiction may disconnect the device until it is repaired to the appropriate official's satisfaction — advising the owner or user in advance or as soon as reasonably practicable — and may charge reasonable reconnection fees . Chronic nuisance alarms are therefore a contractual and financial problem for the customer, not merely a service annoyance.
Exam Watchouts
Important
Forty-eight hours, upon request, customer-owned equipment. All three conditions appear in OAC 380:75-3-4(1)(J), and exam distractors usually change one of them — 24 hours, automatic without request, or leased equipment.
Tip
When a question asks who bears responsibility for an employee's improper conduct during a job, the answer under 59 O.S. § 1800.11 is the licensee — the employee's misconduct within the scope of employment may be treated as an act of the licensee.