Study guide

11.1 CGL Limits of Insurance and Aggregates

Oklahoma Property & Casualty Insurance State

Track your progress as you read

Finished sections get a check mark.

1 Standalone Coverage Map

Standalone Coverage Map

2 Introduction: Oklahoma Property & Casualty Insurance Exam Overview

Oklahoma Property & Casualty Exam Overview

3 National Portion: Insurance Fundamentals

1.1 Risk, Hazards, Perils, and the Law of Large Numbers 1.2 Insurable Interest, Indemnity, and Other Insurance Principles 1.3 Insurance Contract Law and Elements 1.4 Policy Structure: Declarations, Insuring Agreement, Conditions, Exclusions 1.5 Parties, Agents vs. Brokers, and Authority

4 National Portion: Property Insurance Concepts

2.1 Causes of Loss / Named-Peril vs. Open-Peril 2.2 Valuation: ACV, Replacement Cost, and Functional Value 2.3 Coinsurance and the Coinsurance Formula 2.4 Deductibles, Limits, and Loss Settlement 2.5 Common Property Policy Conditions and Clauses

5 National Portion: Dwelling Policies (DP)

3.1 Dwelling Policy Forms DP-1, DP-2, DP-3 3.2 Dwelling Coverages A-E and Other Coverages 3.3 Dwelling Perils, Conditions, and Endorsements 3.4 Mobile Home and Specialized Dwelling Coverage

6 National Portion: Homeowners Policies - Forms & Section I

4.1 Homeowners Forms HO-2 through HO-8 and Eligibility 4.2 Section I Coverages A-D and Additional Coverages 4.3 Section I Perils Insured Against and Exclusions 4.4 Replacement Cost vs. ACV and Loss Settlement in Homeowners

7 National Portion: Homeowners Policies - Section II & Endorsements

5.1 Section II Coverages E (Liability) and F (Medical Payments) 5.2 Homeowners Conditions and Duties After Loss 5.3 Common Homeowners Endorsements (scheduled property, water backup, ordinance or law)

8 National Portion: Personal Auto Policy - Liability & Injury

6.1 Personal Auto Policy Structure and Eligibility 6.2 Part A Liability and Supplementary Payments 6.3 Part B Medical Payments 6.4 Part C Uninsured/Underinsured Motorists

9 National Portion: Personal Auto Policy - Physical Damage & Duties

7.1 Part D - Coverage for Damage to Your Auto 7.2 Exclusions and Part E - Duties After an Accident 7.3 Part F - General Provisions, Endorsements, and No-Fault Concepts

10 National Portion: Liability Insurance Concepts

8.1 Negligence, Torts, and Legal Liability 8.2 Defenses, Damages, and Vicarious Liability 8.3 Occurrence vs. Claims-Made Triggers 8.4 Bodily Injury, Property Damage, and Personal/Advertising Injury

11 National Portion: Commercial Property Insurance

9.1 Commercial Package Policy Structure and Common Policy Conditions 9.2 Building and Personal Property Coverage Form (BPP) 9.3 Causes of Loss Forms (Basic, Broad, Special) 9.4 Business Income and Extra Expense 9.5 Commercial Property Endorsements and the BOP

12 National Portion: Commercial General Liability - Coverages

10.1 CGL Coverage A: Bodily Injury and Property Damage Liability 10.2 CGL Coverage B: Personal and Advertising Injury, Coverage C: Medical Payments 10.3 Who Is an Insured and Supplementary Payments

13 National Portion: Commercial General Liability - Limits, Triggers & Exclusions

11.1 CGL Limits of Insurance and Aggregates 11.2 Occurrence vs. Claims-Made CGL and Retroactive Dates 11.3 Key CGL Exclusions and Endorsements

14 National Portion: Commercial Auto Insurance

12.1 Business Auto Coverage Form and Covered Auto Symbols 12.2 Commercial Auto Liability and Physical Damage 12.3 Motor Carrier / Trucking and MCS-90 12.4 Garage Coverage Form and Garagekeepers 12.5 Commercial Auto Endorsements

15 National Portion: Workers Compensation

13.1 Workers Compensation Statutory Background and Benefits 13.2 Part One (Workers Comp) and Part Two (Employers Liability) 13.3 Premium Basis, Experience Modification, and Classification 13.4 Other States, USL&H, and Federal Acts 13.5 Workers Comp Exclusions and Endorsements

16 National Portion: Other Commercial Lines - BOP, Crime & Marine

14.1 Businessowners Policy (BOP) in Depth 14.2 Crime and Fidelity Coverage 14.3 Inland Marine and Nationwide Marine Definition 14.4 Ocean Marine Coverages (hull, cargo, freight, P&I)

17 National Portion: Other Commercial Lines - Specialty & Professional

15.1 Farm and Agricultural Coverage 15.2 Commercial Umbrella and Excess Liability 15.3 Professional Liability and Errors & Omissions 15.4 Directors & Officers and Employment Practices Liability

18 National Portion: Other Commercial Lines - Surety, Flood & Specialty

Surety and Fidelity Bonds National Flood Insurance Program (NFIP) Cyber, Aviation, and Other Specialty Lines

19 National Portion: Insurance Regulation & Market Conduct

17.1 State Regulation, Licensing, and the McCarran-Ferguson Act 17.2 Rates, Forms, Solvency, and Guaranty Associations 17.3 Producer Authority, Fiduciary Duty, and Company Operations

20 National Portion: Ethics & Unfair Trade Practices

18.1 Unfair Trade Practices and Unfair Claims Settlement 18.2 Producer Ethics, Errors & Omissions Exposure, and Fiduciary Conduct 18.3 Privacy, Fraud, and Consumer Protection

21 Chapter 1: Oklahoma P&C Insurance Regulation & Licensing

1.1 Oklahoma Insurance Department 1.2 Oklahoma P&C Producer Licensing Requirements 1.3 Oklahoma Producer Responsibilities and Ethics

22 Chapter 2: Property Insurance in Oklahoma

2.1 Oklahoma Homeowners Insurance 2.2 Oklahoma Dwelling and Commercial Property Insurance

23 Chapter 3: Auto & Casualty Insurance in Oklahoma

3.1 Oklahoma Auto Insurance Law & Requirements 3.2 General Liability and Workers' Compensation

24 Chapter 4: Oklahoma Insurance Ethics & Consumer Protection

4.1 Unfair Trade Practices and Consumer Protection

11.1 CGL Limits of Insurance and Aggregates

Key Takeaways Explain This Topic AI

The CGL has six limits: general aggregate, products-completed aggregate, personal & advertising injury, each occurrence, damage to premises rented to you ($100,000 default), and medical expense ($5,000 default).

The each-occurrence limit caps one occurrence regardless of the number of claimants; the general aggregate caps the whole policy year.

Products-completed operations claims erode a separate aggregate, not the general aggregate.

Supplementary payments are paid in addition to the limits and do not erode them until a limit is exhausted by judgment or settlement.

CG 25 03 / CG 25 04 endorsements restore separate aggregates per project or per location.

Last updated: June 2026

The Six-Limit Structure of the ISO CGL

The ISO Commercial General Liability Coverage Form ( CG 00 01 , current tested edition CG 00 01 04 13 ) does not use a single policy limit. Instead it stacks six interlocking limits in Section III - Limits of Insurance. On the exam you must know how each limit feeds into the others, and you must be able to read a Declarations page that lists them. The single most common error candidates make is treating the per-occurrence limit as the maximum the policy will pay for the whole year. It is not - the aggregates cap the year.

The six limits, from broadest to narrowest, are:

Limit What it caps Typical amount

General Aggregate All Coverage A + B + C payments except products-completed operations, per policy year $2,000,000

  • Products-Completed Operations Aggregate All BI/PD from products and completed work $2,000,000
  • Personal & Advertising Injury Limit Coverage B, per person/organization $1,000,000
  • Each Occurrence Limit Coverage A BI/PD + Coverage C medical, per occurrence $1,000,000
  • Damage to Premises Rented to You Fire (and short-term rental) damage, per premises $100,000
  • Medical Expense Limit Coverage C, per person $5,000

How the limits interlock

The Each Occurrence Limit is the most a policy pays for the sum of all bodily injury, property damage, and medical payments arising out of any one occurrence - no matter how many claimants are involved. If a single explosion injures 30 people, the $1,000,000 each-occurrence limit caps the total, not $1,000,000 per victim.

Every occurrence payment then erodes the General Aggregate . Once the aggregate is exhausted, the policy pays nothing more for the rest of the policy period even though individual occurrence limits remain unused. This is why a contractor with many small claims can run out of coverage mid-year.

The Products-Completed Operations Aggregate is a separate bucket. Claims that fall in the products-completed operations hazard erode only that aggregate, not the general aggregate, and vice versa. Two independent $2,000,000 ceilings exist.

Worked numeric: aggregate erosion

A print shop carries a standard CGL: $1,000,000 each occurrence / $2,000,000 general aggregate / $2,000,000 products-completed operations aggregate / $100,000 damage to premises / $5,000 medical.

During the year the following Coverage A premises/operations losses are paid:

  • Occurrence 1: customer slip-and-fall, $700,000
  • Occurrence 2: forklift damages a neighbor's wall, $900,000
  • Occurrence 3: another slip-and-fall, $600,000

Each occurrence is within the $1,000,000 each-occurrence cap, so the per-occurrence limit never bites. But the general aggregate is consumed: $700,000 + $900,000 = $1,600,000, leaving $400,000 . Occurrence 3 demands $600,000, so the insurer pays only the remaining $400,000 and the insured absorbs the $200,000 shortfall. The products-completed aggregate is untouched - a defective-product claim later that year would still have its full $2,000,000 available because it draws from a different bucket.

How the Six Limits Reset and the Per-Project Aggregate

The interplay of the CGL's limits is high-yield. The General Aggregate caps Coverage A (non-products/completed-operations), Coverage B, and Medical Payments combined; the Products-Completed Operations Aggregate is a separate bucket for injuries arising after work is done or products leave the insured's control. The Each Occurrence Limit caps Coverage A + Coverage C for one occurrence, but cannot exceed the remaining aggregate. Damage to Premises Rented to You (commonly $100,000) and the Medical Expense Limit (commonly $5,000 per person) are sublimits inside the each-occurrence/aggregate structure.

Aggregates reset at each annual renewal — they do not roll over. A contractor exposed to multiple jobsites can buy the Designated Construction Project(s) General Aggregate (CG 25 03) or per-location aggregate (CG 25 04) so that one large claim on one project does not exhaust the protection available to every other project — a common exam fix for the "shared aggregate" trap.