Study guide
17.2 Rates, Forms, Solvency, and Guaranty Associations
Oklahoma Property & Casualty Insurance State
Track your progress as you read
Finished sections get a check mark.
1 Standalone Coverage Map
Standalone Coverage Map
2 Introduction: Oklahoma Property & Casualty Insurance Exam Overview
Oklahoma Property & Casualty Exam Overview
3 National Portion: Insurance Fundamentals
1.1 Risk, Hazards, Perils, and the Law of Large Numbers 1.2 Insurable Interest, Indemnity, and Other Insurance Principles 1.3 Insurance Contract Law and Elements 1.4 Policy Structure: Declarations, Insuring Agreement, Conditions, Exclusions 1.5 Parties, Agents vs. Brokers, and Authority
4 National Portion: Property Insurance Concepts
2.1 Causes of Loss / Named-Peril vs. Open-Peril 2.2 Valuation: ACV, Replacement Cost, and Functional Value 2.3 Coinsurance and the Coinsurance Formula 2.4 Deductibles, Limits, and Loss Settlement 2.5 Common Property Policy Conditions and Clauses
5 National Portion: Dwelling Policies (DP)
3.1 Dwelling Policy Forms DP-1, DP-2, DP-3 3.2 Dwelling Coverages A-E and Other Coverages 3.3 Dwelling Perils, Conditions, and Endorsements 3.4 Mobile Home and Specialized Dwelling Coverage
6 National Portion: Homeowners Policies - Forms & Section I
4.1 Homeowners Forms HO-2 through HO-8 and Eligibility 4.2 Section I Coverages A-D and Additional Coverages 4.3 Section I Perils Insured Against and Exclusions 4.4 Replacement Cost vs. ACV and Loss Settlement in Homeowners
7 National Portion: Homeowners Policies - Section II & Endorsements
5.1 Section II Coverages E (Liability) and F (Medical Payments) 5.2 Homeowners Conditions and Duties After Loss 5.3 Common Homeowners Endorsements (scheduled property, water backup, ordinance or law)
8 National Portion: Personal Auto Policy - Liability & Injury
6.1 Personal Auto Policy Structure and Eligibility 6.2 Part A Liability and Supplementary Payments 6.3 Part B Medical Payments 6.4 Part C Uninsured/Underinsured Motorists
9 National Portion: Personal Auto Policy - Physical Damage & Duties
7.1 Part D - Coverage for Damage to Your Auto 7.2 Exclusions and Part E - Duties After an Accident 7.3 Part F - General Provisions, Endorsements, and No-Fault Concepts
10 National Portion: Liability Insurance Concepts
8.1 Negligence, Torts, and Legal Liability 8.2 Defenses, Damages, and Vicarious Liability 8.3 Occurrence vs. Claims-Made Triggers 8.4 Bodily Injury, Property Damage, and Personal/Advertising Injury
11 National Portion: Commercial Property Insurance
9.1 Commercial Package Policy Structure and Common Policy Conditions 9.2 Building and Personal Property Coverage Form (BPP) 9.3 Causes of Loss Forms (Basic, Broad, Special) 9.4 Business Income and Extra Expense 9.5 Commercial Property Endorsements and the BOP
12 National Portion: Commercial General Liability - Coverages
10.1 CGL Coverage A: Bodily Injury and Property Damage Liability 10.2 CGL Coverage B: Personal and Advertising Injury, Coverage C: Medical Payments 10.3 Who Is an Insured and Supplementary Payments
13 National Portion: Commercial General Liability - Limits, Triggers & Exclusions
11.1 CGL Limits of Insurance and Aggregates 11.2 Occurrence vs. Claims-Made CGL and Retroactive Dates 11.3 Key CGL Exclusions and Endorsements
14 National Portion: Commercial Auto Insurance
12.1 Business Auto Coverage Form and Covered Auto Symbols 12.2 Commercial Auto Liability and Physical Damage 12.3 Motor Carrier / Trucking and MCS-90 12.4 Garage Coverage Form and Garagekeepers 12.5 Commercial Auto Endorsements
15 National Portion: Workers Compensation
13.1 Workers Compensation Statutory Background and Benefits 13.2 Part One (Workers Comp) and Part Two (Employers Liability) 13.3 Premium Basis, Experience Modification, and Classification 13.4 Other States, USL&H, and Federal Acts 13.5 Workers Comp Exclusions and Endorsements
16 National Portion: Other Commercial Lines - BOP, Crime & Marine
14.1 Businessowners Policy (BOP) in Depth 14.2 Crime and Fidelity Coverage 14.3 Inland Marine and Nationwide Marine Definition 14.4 Ocean Marine Coverages (hull, cargo, freight, P&I)
17 National Portion: Other Commercial Lines - Specialty & Professional
15.1 Farm and Agricultural Coverage 15.2 Commercial Umbrella and Excess Liability 15.3 Professional Liability and Errors & Omissions 15.4 Directors & Officers and Employment Practices Liability
18 National Portion: Other Commercial Lines - Surety, Flood & Specialty
Surety and Fidelity Bonds National Flood Insurance Program (NFIP) Cyber, Aviation, and Other Specialty Lines
19 National Portion: Insurance Regulation & Market Conduct
17.1 State Regulation, Licensing, and the McCarran-Ferguson Act 17.2 Rates, Forms, Solvency, and Guaranty Associations 17.3 Producer Authority, Fiduciary Duty, and Company Operations
20 National Portion: Ethics & Unfair Trade Practices
18.1 Unfair Trade Practices and Unfair Claims Settlement 18.2 Producer Ethics, Errors & Omissions Exposure, and Fiduciary Conduct 18.3 Privacy, Fraud, and Consumer Protection
21 Chapter 1: Oklahoma P&C Insurance Regulation & Licensing
1.1 Oklahoma Insurance Department 1.2 Oklahoma P&C Producer Licensing Requirements 1.3 Oklahoma Producer Responsibilities and Ethics
22 Chapter 2: Property Insurance in Oklahoma
2.1 Oklahoma Homeowners Insurance 2.2 Oklahoma Dwelling and Commercial Property Insurance
23 Chapter 3: Auto & Casualty Insurance in Oklahoma
3.1 Oklahoma Auto Insurance Law & Requirements 3.2 General Liability and Workers' Compensation
24 Chapter 4: Oklahoma Insurance Ethics & Consumer Protection
4.1 Unfair Trade Practices and Consumer Protection
17.2 Rates, Forms, Solvency, and Guaranty Associations
Key Takeaways Explain This Topic AI
P&C rates must be ADEQUATE, NOT EXCESSIVE, and NOT UNFAIRLY DISCRIMINATORY—this three-part standard is tested verbatim
Rate-filing systems differ by timing: prior approval (approve first), file-and-use (use on filing), use-and-file (use then file), plus flex/modified/open-competition variants
ISO and AAIS standardize forms and supply advisory LOSS COSTS; the insurer applies a loss-cost multiplier to reach its filed rate
A workers-comp experience MOD below 1.00 is a credit (better-than-average losses); above 1.00 is a debit
Guaranty associations pay claims of insolvent ADMITTED insurers via post-insolvency assessments and statutory caps; surplus lines/non-admitted carriers are NOT covered
Last updated: June 2026
Rate Regulation Standards
Every state requires that P&C rates meet three statutory standards: rates must be adequate (high enough to keep the insurer solvent), not excessive (not unreasonably high for the risk), and not unfairly discriminatory (insureds with the same expected loss and expense pay the same; risk-based differences are allowed). Memorize this trio — it is asked verbatim.
States use different rate-filing systems to enforce those standards. The exam expects you to distinguish them precisely, because the timing of when an insurer may USE a rate is the whole point of each system.
Rate-Filing Systems
- System How it works
- Prior approval Insurer must file AND receive the regulator's approval before using the rate
- File-and-use Insurer files, then may use immediately; regulator can later disapprove
- Use-and-file Insurer uses the rate first, then files within a set period (e.g., 15 days)
- Modified prior approval Hybrid; approval needed only if the change exceeds a set threshold
- Flex rating Prior approval only if the change exceeds a flex band (e.g., +/-7%)
- Open competition (no-file) Market sets rates; insurer need not file rates at all
Forms (the policy contract language) are usually filed for approval as well. Most P&C forms are standardized by ISO (Insurance Services Office) or AAIS ; ISO supplies advisory loss costs , to which an insurer adds its own loss-cost multiplier to reach a filed rate.
These ISO standardized form names appear throughout the national portion: the Dwelling Program (DP-1, DP-2, DP-3) and Homeowners forms (HO-2, HO-3, HO-5, HO-4 renters, HO-6 condo, HO-8 modified) ; the Personal Auto Policy (PAP) ; and the Commercial Property program built on the Building and Personal Property Coverage Form (CP 00 10) with the Causes of Loss — Basic, Broad, and Special (CP 10 30) forms, plus the Commercial General Liability (CGL, CG 00 01) occurrence form.
Knowing which form is broadest matters: HO-5 and the Special causes-of-loss form are open-peril (all risks except those excluded), while Basic and Broad are named-peril . These editions are all filed and approved through the same rate-and-form process described above, which is why state-specific form amendments are common.
Worked Example: Loss Cost to Rate
ISO files an advisory loss cost of $0.85 per $100 of value for a class. An insurer's expenses and profit require a loss-cost multiplier (LCM) of 1.40 . Its filed rate is:
$0.85 x 1.40 = $1.19 per $100 .
For a building insured to $300,000 , the rate base premium is ($300,000 / 100) x $1.19 = 3,000 x $1.19 = $3,570 . This is why an LCM under 1.0 would be impossible to sustain — the rate must be adequate .
A second favorite calculation is the experience modification (mod) in workers comp. If a risk's actual losses are better than the class average expected losses , the mod is below 1.00 (a credit); worse-than-average experience produces a mod above 1.00 (a debit). A mod of 0.85 applied to a $40,000 manual premium yields $40,000 x 0.85 = $34,000 .
Components of a Rate
Know the vocabulary the filing reviewer uses:
Pure premium / loss cost — the portion of the rate covering expected losses and loss-adjustment expense, before the insurer's overhead.
Loading / expense provision — agent commissions, general expenses, taxes, and profit/contingency, added on top of the loss cost.
Gross rate — loss cost plus loading; multiply by the number of exposure units (e.g., per $100 of value, per car, per $100 of payroll) to get the premium .
A rate is the price per exposure unit ; the premium is rate times exposures. Three rate-making methods appear on exams: the judgment method (rater's experience, used for unusual risks), the manual/class method (published class rates for homogeneous groups), and the merit/experience method (the insured's own loss history modifies the manual rate, as with workers-comp mods and auto safe-driver plans). Schedule rating debits and credits for specific risk features (sprinklers, alarms) also fall under merit rating.
Solvency Surveillance and Guaranty Associations
Regulators police solvency through annual statement filings, risk-based capital (RBC) ratios, and periodic financial and market-conduct examinations . Insurers are rated by independent agencies (A.M. Best, S&P, Moody's, Fitch); A.M. Best's scale runs from A++ down through C and into the D/E/F (under regulatory supervision/liquidation) categories.
When an insurer becomes insolvent , the state guaranty association pays covered claims of licensed (admitted) insurers up to statutory caps. Key exam points:
Guaranty funds are funded by post-insolvency assessments on the other admitted insurers in that line, not by pre-paid premiums.
They cover only admitted insurers — surplus lines / non-admitted carriers are NOT protected.
Coverage caps are set by state law (often $300,000 per claim for P&C lines, with separate workers-comp treatment).
An insurer in financial distress may be placed under conservation, rehabilitation, or liquidation by court order.
The commissioner's solvency toolkit is layered. Risk-based capital compares an insurer's actual capital to a formula-derived minimum; falling below set thresholds triggers escalating regulatory action (Company Action, Regulatory Action, Authorized Control, and Mandatory Control levels).
Insurers must hold adequate reserves — the unearned premium reserve for the unexpired portion of policies and loss reserves for incurred claims not yet paid, including IBNR (incurred but not reported). Statutory investment limits restrict how reserve assets may be held. Market-conduct examinations parallel financial exams, reviewing advertising, underwriting, rating, and claims practices for compliance with the Unfair Trade and Unfair Claims acts.