Study guide

10.3 Arching, Outlines, and Head Shaving

Oregon Barber License Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Oregon Barber Exam Overview

1.1 Current Exam Facts 1.2 Pathways, Fees, and Retake Rules 1.3 How to Study Both Oregon Written Exams

2 Hair Structure, Trichology & Growth

2.1 Trichology and Hair Structure 2.2 Hair Growth Cycles and Patterns 2.3 Hair Color, Pigment, and Melanin in Hair

3 Hair Loss, Hair Disorders & Scalp Disorders

3.1 Hair Loss and Alopecia Types 3.2 Hair Diseases and Disorders 3.3 Scalp Diseases and Disorders

4 Skin Histology

4.1 Structure of the Skin 4.2 Melanin and Skin Pigmentation 4.3 Skin Diseases and Disorders

5 Anatomy of the Head and Face

5.1 Bones of the Head and Face 5.2 Muscles of the Head, Face, and Neck 5.3 Nerves of the Head and Face

6 Microbiology for Oregon Barbers

6.1 Bacteria and Viruses 6.2 Immunity and Parasites

7 Client Consultation, Analysis & Treatments

7.1 Client Consultation and Physician Referral 7.2 Hair, Scalp, and Skin Analysis 7.3 Hair, Scalp, and Skin Treatments

8 Hair Care & Skin Care Procedures

8.1 Scalp Massage and Shampoo Service 8.2 Facials and Facial Massage

9 Design Elements

9.1 Facial Shapes, Head Form, and Profiles 9.2 Elevations, Form, and Texture 9.3 Shape, Balance, and Proportion

10 Cutting and Styling Procedures

10.1 Shear Cutting and Razor Cutting 10.2 Clipper Cutting, Blending, Tapering, and Fading 10.3 Arching, Outlines, and Head Shaving 10.4 Thermal Styling and Artificial Hair

11 Shaving Procedures

11.1 Areas of the Face and Shaving Technique 11.2 Steaming, Lathering, and Shaving Strokes 11.3 Finishing Step After the Shave

12 Implements, Tools and Equipment

12.1 Shears and Razors 12.2 Clippers, Combs, and Brushes 12.3 Capes, Drapes, and Massage Tools

13 Product Knowledge and Chemistry

13.1 Shampoos and Conditioners 13.2 Styling Aids and Shaving Products 13.3 pH, Water, and Cosmetic Chemistry

14 Safety, Infection Control & Federal Standards

14.1 Safe Usage and Safety Devices 14.2 OSHA, FDA, EPA, and CDC Standards

15 Oregon Definitions & Scope of Barbering

15.1 Statutory Definition and Scope of Barbering 15.2 Certificate, Authorization, and Fields of Practice 15.3 Facility, Freelance, and Independent Contractor Definitions 15.4 Board, HLO, and Key OAR 817 Terms

16 Facility Licensure & Physical Standards

16.1 Facility License and Application Requirements 16.2 Water Supply, Restrooms, Floors, Walls, and Ceilings 16.3 Residential Facilities and Temporary Facility Permits

17 Infection Control in the Oregon Shop

17.1 Servicing Clients 17.2 Towels, Linens, and Articles in Contact with Clients 17.3 Disinfecting Non-Electrical and Electrical Tools 17.4 Storage of Tools, Refuse, and Waste

18 Shop Hygiene, Equipment & Client Protection

18.1 Hairpieces, Equipment, and Pets in Facilities 18.2 Cleanable, Non-Absorbent Surfaces 18.3 Client Protection During Services

19 Practice Standards & Business Authorizations

19.1 Practice Standards and Professional Conduct 19.2 Freelance Authorization and Independent Contractor 19.3 Posting Requirements and Facility Operations

20 Examinations, Licensing & Renewal

20.1 Written Examination Rules and Retake Policy 20.2 Practitioner Certificate and 746-Hour Curriculum 20.3 Renewal, Bloodborne Pathogens Training, Inactive and Reinstatement

21 Chemicals, Storage & Civil Penalties

21.1 Chemical Use, Storage, and Formaldehyde 21.2 Handling and Disposing of Chemicals 21.3 Civil Penalties and HLO Enforcement

10.3 Arching, Outlines, and Head Shaving

Key Takeaways Explain This Topic AI

Arching and outlines plus head shaving are named Cutting and Styling subtopics (11 of 100); they are cosmetic edges and scalp work, not the Chapter 11 fourteen-stroke face shave.

A lineup is a designed, often squared or sharpened edge; a natural hairline follows the client's growth without a hard manufactured line — document the goal before you draw.

Arch the sideburn through the temple into the fade; outline the ear and nape so left and right match unless the client asked for asymmetry.

Full head shave: clipper the hair short, steam and lather, stretch the scalp, shave with the grain first; a bald fade may add a razor only on the faded band.

Scalp nicks: gloves when blood exposure is routine (OAR 817-010-0008(2)); blood-soiled disposable blades in a labeled sharps container (OAR 817-010-0060(6)); blood-contaminated surfaces get high-level disinfectant (OAR 817-010-0101(4)).

Last updated: August 2026

The bulletin lists arching and outlines and head shaving next to shear, razor, and clipper work. They are still Cutting and Styling (11 of 100), not the Shaving block (8 of 100) that Chapter 11 covers with face areas, steaming, lathering, strokes, and finishing. Cross-link the steam-and-stretch idea. Do not memorize a fourteen-stroke face pattern for the scalp. The scalp is a different canvas: more follicles per square inch, different grain maps, and a higher chance of nicks if you treat a crown like a cheek.

ORS 690.005(2) still frames the work as cosmetic , not medical diagnosis or treatment. An outline that reveals a weeping lesion is a stop-and-refer moment (Chapter 7), not a chance to "clean it up with the trimmers."

Sideburn and arch design

The arch is the curve that joins the sideburn to the temporal hairline and, on a fade, to the faded band. A high arch opens the temple and can lengthen a round face. A lower, squarer arch keeps width. Chapter 9 already tested facial shape; here you cut the line that makes that balance visible. Match left and right unless the client documented an asymmetrical goal. Palm-to-palm shears or an outliner define the arch after the clipper has set the length.

Sideburn length is a proportion decision: too long on a long face adds a fourth chin of hair; too short on a square jaw can make the jaw heavier. The beard, if present, is still barbering under ORS 690.005(2)(d). The sideburn is the hinge between scalp hair and beard. Do not leave a gap unless that gap is the design.

Neck outline, ear outline, lineup versus natural hairline

The neck outline (nape) can be squared, rounded, or tapered into existing hair. A squared nape reads graphic. A tapered nape reads softer and grows out with less of a shelf. The ear outline follows the helix without gouging the mastoid or leaving a step above the ear. Work both ears with the same reference: sit the client up, look from the back, then from each side.

A lineup (edge up, shape up) is a designed edge. You impose a line — often sharper, sometimes squarer at the temples and forehead — that may sit slightly inside or outside the natural growth. A natural hairline follows the client's growth pattern without a hard manufactured edge: recessions stay, cowlicks stay, the outline is cleaned of stray hair rather than redrawn. Neither is "more professional." The consultation documents which one the client wants. Drawing a lineup on a client who asked to keep a receded natural hairline is a design failure even if the clipper work is blended.

  • Edge What you cut What the client sees
  • Arch Sideburn through temple into fade or outline Connected fade, not two haircuts
  • Ear outline Hair around the helix and behind the ear Clean, even, no step
  • Neck outline Nape: square, round, or tapered Graphic versus soft grow-out
  • Lineup Designed, often sharpened or squared forehead/temple A drawn edge
  • Natural hairline Strays removed; growth pattern kept The client's own edge
  • Full head shave versus balding with clipper then razor

A full head shave removes scalp hair to the skin over the whole head. A bald fade or partial balding takes only a band (or the sides) to skin and leaves length on top. Both usually start with a clipper : cut the hair as short as the blade will go (often 000, lever closed, or a balding blade) before the razor. Razoring long dry hair on a scalp is how you skip and nick.

Then treat the skin as shaving skin, without importing the face's fourteen strokes:

Steam (towel or steamer) to soften keratin and raise the hair.

Lather with a clean brush or hygienic application — never dip a used brush back into a common soap mass without the shop's infection-control method.

Stretch the scalp with the free hand so the surface is taut. Folds hide hair and catch the blade.

Read the grain . Hair on the crown and occipital often swirls. First passes go with the grain . Across or against the grain is a closer second pass only where the skin tolerates it.

Light razor pressure. Rinse and check in the mirror with the client upright.

Steam and stretch are the same physics Chapter 11 uses on the face. The stroke map is not. Do not number fourteen scalp strokes on the exam.

Infection control for scalp nicks

Head shaving routinely can expose blood. OAR 817-010-0008(2) requires single-use disposable protective gloves when a service routinely involves exposure to blood or other potentially infectious materials. OAR 817-010-0008(3) requires eye goggles, shields, or a mask if spattering is likely. OAR 817-010-0008(4) sends blood-contact refuse to OAR 817-010-0060.

If you nick the scalp:

Stop the pass. Do not "finish the section" with a contaminated blade on broken skin.

Control the nick with appropriate first-aid practice and a fresh, single-use material — not a community towel from the back-bar.

A disposable blade that contacted blood goes in a sharps container that is puncture-resistant, leak-proof, closable, and labeled with the biohazard symbol ( OAR 817-010-0060(6) ).

Other blood waste goes in a glove or plastic bag, then a covered container with a liner ( OAR 817-010-0060(5) ).

OAR 817-010-0101(4) : all surfaces contaminated by blood or OPIM are disinfected with a high-level solution according to the manufacturer's instructions.

Reusable razor bodies still follow OAR 817-010-0068 high-level immersion after clean and rinse. The next client's head does not inherit this client's blood.

Hand washing still happens immediately before and after the client (OAR 817-010-0008(1)), including after gloves come off.

Oregon shop scenario

A client in Eugene wants a bald fade and a lineup. You confirm the lineup in the mirror — squared temples, natural nape. Clipper the faded band to 000, blend through 0 and 1, arch the sideburn so the fade does not end in a notch. Steam and lather only the skin band, stretch, and razor with the grain. A nick appears over the occipital swirl. You stop, glove if you are not already gloved, use a fresh material on the nick, drop the blade in the labeled sharps container, bag other blood waste, and disinfect the chair surface with high-level disinfectant. You do not "just finish" with the same blade, and you do not count fourteen face strokes on a scalp.

Loading diagram... Oregon outlines and head shaving — not the face 14-stroke