Study guide
10.2 Clipper Cutting, Blending, Tapering, and Fading
Oregon Barber License Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Oregon Barber Exam Overview
1.1 Current Exam Facts 1.2 Pathways, Fees, and Retake Rules 1.3 How to Study Both Oregon Written Exams
2 Hair Structure, Trichology & Growth
2.1 Trichology and Hair Structure 2.2 Hair Growth Cycles and Patterns 2.3 Hair Color, Pigment, and Melanin in Hair
3 Hair Loss, Hair Disorders & Scalp Disorders
3.1 Hair Loss and Alopecia Types 3.2 Hair Diseases and Disorders 3.3 Scalp Diseases and Disorders
4 Skin Histology
4.1 Structure of the Skin 4.2 Melanin and Skin Pigmentation 4.3 Skin Diseases and Disorders
5 Anatomy of the Head and Face
5.1 Bones of the Head and Face 5.2 Muscles of the Head, Face, and Neck 5.3 Nerves of the Head and Face
6 Microbiology for Oregon Barbers
6.1 Bacteria and Viruses 6.2 Immunity and Parasites
7 Client Consultation, Analysis & Treatments
7.1 Client Consultation and Physician Referral 7.2 Hair, Scalp, and Skin Analysis 7.3 Hair, Scalp, and Skin Treatments
8 Hair Care & Skin Care Procedures
8.1 Scalp Massage and Shampoo Service 8.2 Facials and Facial Massage
9 Design Elements
9.1 Facial Shapes, Head Form, and Profiles 9.2 Elevations, Form, and Texture 9.3 Shape, Balance, and Proportion
10 Cutting and Styling Procedures
10.1 Shear Cutting and Razor Cutting 10.2 Clipper Cutting, Blending, Tapering, and Fading 10.3 Arching, Outlines, and Head Shaving 10.4 Thermal Styling and Artificial Hair
11 Shaving Procedures
11.1 Areas of the Face and Shaving Technique 11.2 Steaming, Lathering, and Shaving Strokes 11.3 Finishing Step After the Shave
12 Implements, Tools and Equipment
12.1 Shears and Razors 12.2 Clippers, Combs, and Brushes 12.3 Capes, Drapes, and Massage Tools
13 Product Knowledge and Chemistry
13.1 Shampoos and Conditioners 13.2 Styling Aids and Shaving Products 13.3 pH, Water, and Cosmetic Chemistry
14 Safety, Infection Control & Federal Standards
14.1 Safe Usage and Safety Devices 14.2 OSHA, FDA, EPA, and CDC Standards
15 Oregon Definitions & Scope of Barbering
15.1 Statutory Definition and Scope of Barbering 15.2 Certificate, Authorization, and Fields of Practice 15.3 Facility, Freelance, and Independent Contractor Definitions 15.4 Board, HLO, and Key OAR 817 Terms
16 Facility Licensure & Physical Standards
16.1 Facility License and Application Requirements 16.2 Water Supply, Restrooms, Floors, Walls, and Ceilings 16.3 Residential Facilities and Temporary Facility Permits
17 Infection Control in the Oregon Shop
17.1 Servicing Clients 17.2 Towels, Linens, and Articles in Contact with Clients 17.3 Disinfecting Non-Electrical and Electrical Tools 17.4 Storage of Tools, Refuse, and Waste
18 Shop Hygiene, Equipment & Client Protection
18.1 Hairpieces, Equipment, and Pets in Facilities 18.2 Cleanable, Non-Absorbent Surfaces 18.3 Client Protection During Services
19 Practice Standards & Business Authorizations
19.1 Practice Standards and Professional Conduct 19.2 Freelance Authorization and Independent Contractor 19.3 Posting Requirements and Facility Operations
20 Examinations, Licensing & Renewal
20.1 Written Examination Rules and Retake Policy 20.2 Practitioner Certificate and 746-Hour Curriculum 20.3 Renewal, Bloodborne Pathogens Training, Inactive and Reinstatement
21 Chemicals, Storage & Civil Penalties
21.1 Chemical Use, Storage, and Formaldehyde 21.2 Handling and Disposing of Chemicals 21.3 Civil Penalties and HLO Enforcement
10.2 Clipper Cutting, Blending, Tapering, and Fading
Key Takeaways Explain This Topic AI
Clipper cutting, blending, tapering, and fading sit inside the same 11-question Cutting and Styling block; Oregon tests clipper-over-comb, clipper-over-fingers, taper-lever position, and numbered blades (000, 0, 1, 1½, 2).
Taper lever closed (tight cutting position) leaves the shortest leftover hair; lever open leaves more hair — use it to blend between blade sizes without changing blades.
A taper is a gradual length change that often still shows hair at the bottom; a fade is a more dramatic taper; a bald or skin fade takes the lowest band to visible skin, often finished with a razor.
A weight line is the shelf where two lengths meet; blending removes or softens that shelf; arching is the curved connection from sideburn through temple into the fade.
OAR 817-010-0069: remove all hair first; saturate electrical clipper blades with high-level disinfectant (solution, spray, or foam); other electrical tools, including the clipper body, take low-level disinfectant.
Last updated: August 2026
The bulletin's Cutting and Styling block names clipper cutting and blending, tapering, and fading as separate subtopics. On the shop floor they are one service. Design (Chapter 9) already told you that clipper-over-comb builds a graduated, more activated surface along the parietal ridge. This section is the implement language HLO writes items on: how the comb, fingers, lever, and numbered blades create that graduation — and how Oregon disinfects the blades afterward.
OAR 817-005-0005(37) includes clippers in tools and implements . The blades are electrical, so they do not follow the shear immersion rule in OAR 817-010-0068. They follow OAR 817-010-0069 . Get the distinction wrong on the laws paper and a perfect fade still fails.
Clipper-over-comb and clipper-over-fingers
Clipper-over-comb uses the comb as the guide. Teeth lift the hair; the clipper rides the comb spine or the teeth, depending on how much leftover length you want. It is the classic nape, side, and around-the-ear method, and it is how you erase a shelf without jumping a full blade size. Keep the comb moving. A parked comb plus a running blade chews a hole.
Clipper-over-fingers is the top-and-crown cousin of shear-over-fingers. Fingers hold the section; the clipper cuts to the finger line. Use it when the interior is too long for a comb-only guide and you still want clipper speed. It is not a substitute for a #2 blade on the nape, and it is not a reason to skip a traveling guideline on the top.
Taper lever: open versus closed
The taper lever (also called the fade lever) changes the gap between the moving blade and the still blade on many adjustable clippers.
Lever closed (tight, cutting position, often toward the blade) leaves the shortest leftover hair with that blade or guard.
Lever open (more gap) leaves more hair — a longer leftover without changing blades.
Use the lever as a blend between two numbered lengths: close it for the shorter band, open it as you climb, then step to the next blade. The lever does not replace disinfection, and it does not turn a clipper into a shear.
Blade sizes: 000, 0, 1, 1½, 2
Detachable blade numbers are not the same object as plastic attachment guards, but shops use both. Oregon theory expects the sequence : the smaller the number, the shorter the leftover . Exact leftover varies by brand and by lever position. Teach the usual Andis/Oster-style detachable chart, then say "approximately" on the exam if a stem does not name a brand.
- Blade Approximate leftover Typical fade use
- 000 1/50" (~0.5 mm) Skin-close / bald-fade floor
- 0 ~1/16" (~1.5 mm) First visible hair above skin
- 1 ~3/32" (~2.4 mm) Tight crop / low-fade step
- 1½ ~5/32" (~4 mm) Mid-fade step
- 2 ~1/4" (~6 mm) Blend into longer hair
Guards on a magnetic-blade clipper often read #1 = 1/8" , #1½ = 3/16" , #2 = 1/4" . Do not mix a detachable 1 with a guard 1 unless the stem tells you which system. The exam cares that you can order lengths and that you know 000 is closer than 2.
Taper, fade, bald fade, and the weight line
A taper is a gradual length change from short to longer. Classic barber tapers often still show hair at the neck and sides; the silhouette is blended, not shaved to skin. A fade is a more dramatic taper. Length drops faster, and the bottom band is very short. A bald fade (skin fade) takes the lowest band to visible skin . Many bald fades are clippered with a 000 or a balding blade, then finished with a razor. The razor finish is a scalp shave, not the Chapter 11 fourteen-stroke face pattern.
Low, mid, and high name where the shortest band sits: low near the ear, mid toward the temple, high toward the parietal ridge. The client's documented goal, head form, and recession decide the height — not a social-media default.
A weight line is the visible shelf where a longer length sits on a shorter one. Unblended 2-over-0 looks like a hat. Blending removes or softens that shelf: clipper-over-comb, lever work, and in-between blades (0 to 1 to 1½) are the tools. If you can still see a hard step after the client stands up, you have not blended.
Arching is the curved connection from the sideburn through the temple into the fade or outline. A fade that does not arch into the sideburn looks like two haircuts. Section 10.3 finishes the outline; this section is the length connection that makes the arch possible.
Oregon disinfection: clipper blades are the exception
OAR 817-010-0069(1) says all electrical tools and implements, with the exception of clipper blades , must be disinfected before each use by (a) removing all hair and foreign material, then (b) using a low-level disinfectant according to the manufacturer's instructions. That is the clipper body , the cord, the blow-dryer housing, and the curling-iron barrel.
OAR 817-010-0069(2) is the blade sentence HLO writes items on. Electrical clipper blades must be disinfected before each use: (a) remove all hair and all foreign material ; (b) completely saturate the clipper blade with a high-level disinfectant solution, spray, or foam used according to the manufacturer's instructions. OAR 817-010-0069(3) allows sterilization of blades by an approved method listed in OAR 817-010-0065.
Do not dunk the motor. Do not skip the hair in the teeth and spray the housing. Hair left in the blades is not "saturated." High-level on the blades, low-level on the rest of the electrical tool, hair removed first — that triad is the laws-exam version of a fade.
OAR 817-010-0075 still applies: disinfected tools stored separately from used tools; drawers for clean tools kept clean and free of hair.
Oregon shop scenario
A client in Salem wants a mid fade with a natural nape. You start with a 000, lever closed, at the bottom; open the lever as you climb; step to 0, then 1, then 1½ into the parietal ridge. Clipper-over-comb erases the 1-to-1½ shelf. You arch the temple into the sideburn so the fade does not stop in a corner. The client asks you to "just wipe the clipper on a towel for the next guy — we're slammed." You refuse. Hair comes out of the blades, the blades are saturated with high-level disinfectant, and the housing gets low-level disinfectant. The next client does not inherit the last client's hair.