Study guide

10.4 Thermal Styling and Artificial Hair

Oregon Barber License Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Oregon Barber Exam Overview

1.1 Current Exam Facts 1.2 Pathways, Fees, and Retake Rules 1.3 How to Study Both Oregon Written Exams

2 Hair Structure, Trichology & Growth

2.1 Trichology and Hair Structure 2.2 Hair Growth Cycles and Patterns 2.3 Hair Color, Pigment, and Melanin in Hair

3 Hair Loss, Hair Disorders & Scalp Disorders

3.1 Hair Loss and Alopecia Types 3.2 Hair Diseases and Disorders 3.3 Scalp Diseases and Disorders

4 Skin Histology

4.1 Structure of the Skin 4.2 Melanin and Skin Pigmentation 4.3 Skin Diseases and Disorders

5 Anatomy of the Head and Face

5.1 Bones of the Head and Face 5.2 Muscles of the Head, Face, and Neck 5.3 Nerves of the Head and Face

6 Microbiology for Oregon Barbers

6.1 Bacteria and Viruses 6.2 Immunity and Parasites

7 Client Consultation, Analysis & Treatments

7.1 Client Consultation and Physician Referral 7.2 Hair, Scalp, and Skin Analysis 7.3 Hair, Scalp, and Skin Treatments

8 Hair Care & Skin Care Procedures

8.1 Scalp Massage and Shampoo Service 8.2 Facials and Facial Massage

9 Design Elements

9.1 Facial Shapes, Head Form, and Profiles 9.2 Elevations, Form, and Texture 9.3 Shape, Balance, and Proportion

10 Cutting and Styling Procedures

10.1 Shear Cutting and Razor Cutting 10.2 Clipper Cutting, Blending, Tapering, and Fading 10.3 Arching, Outlines, and Head Shaving 10.4 Thermal Styling and Artificial Hair

11 Shaving Procedures

11.1 Areas of the Face and Shaving Technique 11.2 Steaming, Lathering, and Shaving Strokes 11.3 Finishing Step After the Shave

12 Implements, Tools and Equipment

12.1 Shears and Razors 12.2 Clippers, Combs, and Brushes 12.3 Capes, Drapes, and Massage Tools

13 Product Knowledge and Chemistry

13.1 Shampoos and Conditioners 13.2 Styling Aids and Shaving Products 13.3 pH, Water, and Cosmetic Chemistry

14 Safety, Infection Control & Federal Standards

14.1 Safe Usage and Safety Devices 14.2 OSHA, FDA, EPA, and CDC Standards

15 Oregon Definitions & Scope of Barbering

15.1 Statutory Definition and Scope of Barbering 15.2 Certificate, Authorization, and Fields of Practice 15.3 Facility, Freelance, and Independent Contractor Definitions 15.4 Board, HLO, and Key OAR 817 Terms

16 Facility Licensure & Physical Standards

16.1 Facility License and Application Requirements 16.2 Water Supply, Restrooms, Floors, Walls, and Ceilings 16.3 Residential Facilities and Temporary Facility Permits

17 Infection Control in the Oregon Shop

17.1 Servicing Clients 17.2 Towels, Linens, and Articles in Contact with Clients 17.3 Disinfecting Non-Electrical and Electrical Tools 17.4 Storage of Tools, Refuse, and Waste

18 Shop Hygiene, Equipment & Client Protection

18.1 Hairpieces, Equipment, and Pets in Facilities 18.2 Cleanable, Non-Absorbent Surfaces 18.3 Client Protection During Services

19 Practice Standards & Business Authorizations

19.1 Practice Standards and Professional Conduct 19.2 Freelance Authorization and Independent Contractor 19.3 Posting Requirements and Facility Operations

20 Examinations, Licensing & Renewal

20.1 Written Examination Rules and Retake Policy 20.2 Practitioner Certificate and 746-Hour Curriculum 20.3 Renewal, Bloodborne Pathogens Training, Inactive and Reinstatement

21 Chemicals, Storage & Civil Penalties

21.1 Chemical Use, Storage, and Formaldehyde 21.2 Handling and Disposing of Chemicals 21.3 Civil Penalties and HLO Enforcement

10.4 Thermal Styling and Artificial Hair

Key Takeaways Explain This Topic AI

Thermal styling and artificial hair close the 11-question Cutting and Styling block; ORS 690.005(2)(a) authorizes styling and conditioning, not chemical waving, relaxing, bleaching, or coloring (hair design).

Heat and tension rearrange hydrogen bonds in keratin (alpha coiled form toward beta stretched form); the set lasts until moisture resets it — disulfide-bond perms are not barbering.

OAR 817-005-0005: an article includes neck-strips, towels, and capes; equipment includes stationary dryers and styling chairs; portable irons and blow-dryers are electrical tools — remove hair, then low-level disinfectant (OAR 817-010-0069(1)).

OAR 817-010-0085(1): during try-on of a manufactured hairpiece, the portion of the head that contacts the piece must be completely covered with a disposable cover.

OAR 817-010-0085(2): used hair goods must be cleaned according to the manufacturer's instructions before resale and marked as "used" — do not pass one client's piece to another as if it were new.

Last updated: August 2026

Thermal styling and artificial hair are the last two named subtopics in the 11-question Cutting and Styling block. They are still styling under ORS 690.005(2)(a) , plus the hair-goods hygiene rule at OAR 817-010-0085 . They are not permanent waving, relaxing, bleaching, or coloring. Those words sit in hair design at ORS 690.005(10)(b). If a stem offers a relaxer so a press will last, the barbering answer is no.

Heat and keratin

Hair is keratin . Hydrogen bonds in that keratin break in the presence of water and heat and reform as the hair cools and dries . That is thermal styling. With heat and tension, coiled alpha keratin can be set toward stretched beta keratin . A blow-dry with tension, a curling iron wrapped and cooled, a flat iron pass, or a pressing comb all use that set. Moisture — humidity, a later shampoo, sweat — lets hydrogen bonds reset toward the hair's unstyled shape. Teach that as a temporary, physical set.

Disulfide bonds are the chemical bonds that a perm or relaxer targets. Breaking them is a chemical service ( OAR 817-005-0005(7) ): a product that restructures hair. That is hair design, not barbering. Do not tell the laws exam that a pressing comb "permanently straightens like a relaxer." Overheating does not convert a press into a chemical; it denatures protein, drives out moisture, and can burn the scalp.

ORS 690.005(2)(c) lets barbers use some mechanical appliances on scalp, face, and neck treatments, but not galvanic or faradic . A blow-dryer and a curling iron used to style hair are ordinary styling tools, not galvanic current.

Blow-dry, curling iron, flat iron, pressing

Blow-dry from damp toward dry. A concentrator nozzle directs air for a smoother, more stretched (beta) set. A diffuser spreads air for curl pattern with less blow-out. Follow the documented direction of the cut. Wet hair stretched with high heat is where keratin fails — keep the airflow moving.

A curling iron uses a heated barrel, often with a clamp. Section, wrap, heat, cool before combing. A flat iron uses two plates; hair should be dry. A pressing comb (hot comb) is classic barber thermal work: hair dry , a pressing oil or cream on intact hair, small sections, comb heated to a tested temperature (paper or water test in the textbook method — never on the client's skin). Pressing is styling. It is not a relaxer and it is not a medical appliance.

If the scalp is abraded or the hair is chemically compromised from a service the client had elsewhere, you still analyze first (Chapter 7). Thermal heat on a burn or a relaxer-break is how you turn a style into a complaint.

Oregon "article," equipment, and electrical tools

HLO vocabulary matters on the laws paper more than brand names.

  • Word Rule Thermal-shop examples
  • Article OAR 817-005-0005(3) Neck-strips, towels or linens, cloth or plastic capes
  • Equipment OAR 817-005-0005(14) Styling chairs, cabinets, sinks, stationary dryers
  • Tools and implements OAR 817-005-0005(37) Combs, brushes, shears, clippers, portable irons
  • Common area OAR 817-005-0005(8) Reception, sinks, shampoo bowls, hair dryers and dryer areas

OAR 817-010-0101 : equipment surfaces (including back-bars) are cleanable and non-porous; all equipment is clean and in good repair; blood-contaminated surfaces take high-level disinfectant. A cracked hood dryer or a frayed iron cord is not "in good repair."

Portable blow-dryers, curling irons, and flat irons are electrical tools other than clipper blades. OAR 817-010-0069(1) : remove all hair and foreign material, then disinfect with a low-level disinfectant according to the manufacturer's instructions. Do not immerse an electrical iron. Do not skip the hair wrapped around the barrel. Clipper blades remain the high-level saturation exception from Section 10.2.

Artificial hair: toupees, hairpieces, integration

Toupees and other hairpieces are manufactured or custom goods that cover part or all of the scalp. Integration pieces let the client's own hair come through a base. ORS 690.046(3) lets a barber certificate holder practice natural hair care , which includes making customized wigs from hair or fibers ( ORS 690.005(15)(a)(C) ). Cutting and styling a piece on a client is still styling. Chemical color of the piece is still hair design unless another certificate covers it.

OAR 817-010-0085 Hairpieces is short and examinable. The current text:

During the trying on of a manufactured hairpiece , that portion of the head which comes in contact with the hairpiece must be completely covered with a disposable cover .

All used hair goods must be cleaned according to manufacturer's instructions before resale and marked as "used."

Teach that actual rule. Do not invent a 10-minute high-level immersion for a toupee — the rule points to the manufacturer's instructions for used goods, and to a disposable cover for try-on. A bare scalp under a shop try-on piece is a Division 10 miss even if the fade was perfect.

Do not place another client's worn piece on a new client as if it were a disinfected comb. A try-on manufactured piece needs the disposable cover. A used good headed for resale needs manufacturer cleaning and the word "used." A client's own piece that they bring in is theirs; you still drape, you still wash hands, and you still do not store it in the clean-tool drawer with disinfected shears ( OAR 817-010-0075 ). Clean storage is separate from soiled storage. Follow the piece manufacturer's cleaning method — solvents and bases vary; barbicide-on-lace is not a rule HLO wrote.

Oregon shop scenario

A client in Medford wants a press and then wants to try a manufactured toupee from the shop's display. You confirm there is no chemical-relaxer request — pressing only. Hair is dry, pressing cream is applied, sections are small, and the comb is tested off the scalp. After the press, the iron and comb are cleared of hair and given low-level disinfectant; the stationary dryer the client sat under is equipment that must stay clean and in good repair. For the try-on, you place a disposable cover on every part of the head that will touch the piece, then you try the manufactured hairpiece. You do not set that piece on a bare scalp, and if the shop later resells a returned piece, it is cleaned per the manufacturer and marked "used."

Loading diagram... Oregon thermal styling versus OAR 817-010-0085 hairpieces