Study guide

5.1 Bones of the Head and Face

Oregon Barber License Exam

Track your progress as you read

Finished sections get a check mark.

1 Introduction & Oregon Barber Exam Overview

1.1 Current Exam Facts 1.2 Pathways, Fees, and Retake Rules 1.3 How to Study Both Oregon Written Exams

2 Hair Structure, Trichology & Growth

2.1 Trichology and Hair Structure 2.2 Hair Growth Cycles and Patterns 2.3 Hair Color, Pigment, and Melanin in Hair

3 Hair Loss, Hair Disorders & Scalp Disorders

3.1 Hair Loss and Alopecia Types 3.2 Hair Diseases and Disorders 3.3 Scalp Diseases and Disorders

4 Skin Histology

4.1 Structure of the Skin 4.2 Melanin and Skin Pigmentation 4.3 Skin Diseases and Disorders

5 Anatomy of the Head and Face

5.1 Bones of the Head and Face 5.2 Muscles of the Head, Face, and Neck 5.3 Nerves of the Head and Face

6 Microbiology for Oregon Barbers

6.1 Bacteria and Viruses 6.2 Immunity and Parasites

7 Client Consultation, Analysis & Treatments

7.1 Client Consultation and Physician Referral 7.2 Hair, Scalp, and Skin Analysis 7.3 Hair, Scalp, and Skin Treatments

8 Hair Care & Skin Care Procedures

8.1 Scalp Massage and Shampoo Service 8.2 Facials and Facial Massage

9 Design Elements

9.1 Facial Shapes, Head Form, and Profiles 9.2 Elevations, Form, and Texture 9.3 Shape, Balance, and Proportion

10 Cutting and Styling Procedures

10.1 Shear Cutting and Razor Cutting 10.2 Clipper Cutting, Blending, Tapering, and Fading 10.3 Arching, Outlines, and Head Shaving 10.4 Thermal Styling and Artificial Hair

11 Shaving Procedures

11.1 Areas of the Face and Shaving Technique 11.2 Steaming, Lathering, and Shaving Strokes 11.3 Finishing Step After the Shave

12 Implements, Tools and Equipment

12.1 Shears and Razors 12.2 Clippers, Combs, and Brushes 12.3 Capes, Drapes, and Massage Tools

13 Product Knowledge and Chemistry

13.1 Shampoos and Conditioners 13.2 Styling Aids and Shaving Products 13.3 pH, Water, and Cosmetic Chemistry

14 Safety, Infection Control & Federal Standards

14.1 Safe Usage and Safety Devices 14.2 OSHA, FDA, EPA, and CDC Standards

15 Oregon Definitions & Scope of Barbering

15.1 Statutory Definition and Scope of Barbering 15.2 Certificate, Authorization, and Fields of Practice 15.3 Facility, Freelance, and Independent Contractor Definitions 15.4 Board, HLO, and Key OAR 817 Terms

16 Facility Licensure & Physical Standards

16.1 Facility License and Application Requirements 16.2 Water Supply, Restrooms, Floors, Walls, and Ceilings 16.3 Residential Facilities and Temporary Facility Permits

17 Infection Control in the Oregon Shop

17.1 Servicing Clients 17.2 Towels, Linens, and Articles in Contact with Clients 17.3 Disinfecting Non-Electrical and Electrical Tools 17.4 Storage of Tools, Refuse, and Waste

18 Shop Hygiene, Equipment & Client Protection

18.1 Hairpieces, Equipment, and Pets in Facilities 18.2 Cleanable, Non-Absorbent Surfaces 18.3 Client Protection During Services

19 Practice Standards & Business Authorizations

19.1 Practice Standards and Professional Conduct 19.2 Freelance Authorization and Independent Contractor 19.3 Posting Requirements and Facility Operations

20 Examinations, Licensing & Renewal

20.1 Written Examination Rules and Retake Policy 20.2 Practitioner Certificate and 746-Hour Curriculum 20.3 Renewal, Bloodborne Pathogens Training, Inactive and Reinstatement

21 Chemicals, Storage & Civil Penalties

21.1 Chemical Use, Storage, and Formaldehyde 21.2 Handling and Disposing of Chemicals 21.3 Civil Penalties and HLO Enforcement

5.1 Bones of the Head and Face

Key Takeaways Explain This Topic AI

The Oregon Barbering Examination bulletin lists Anatomy of the Head and Face as 3 questions, with bones, muscles, and nerves as separate sub-topics; design (10 questions) and shaving (8 questions) use the same bony landmarks.

Eight cranial bones: occipital (1), parietal (2), frontal (1), temporal (2), ethmoid (1), and sphenoid (1).

Fourteen facial bones: nasal (2), lacrimal (2), zygomatic (2), maxillae (2), mandible (1), turbinal (2), vomer (1), and palatine (2).

The mandible is the only movable bone of the skull and the primary jawline landmark for beard design.

Barber cutting landmarks: external occipital protuberance (nape fade), parietal ridge (round of the head), frontal bone (fringe and front hairline), zygomatic bones (cheek line), and mastoid process (around-the-ear clipper work).

Last updated: August 2026

The Oregon Barbering Examination Information Bulletin (revised October 25, 2019) gives Anatomy of the Head and Face only 3 questions on the 100-item, 90-minute theory paper administered by the Oregon Health Licensing Office (HLO) for the Board of Cosmetology. Those three items are not a throwaway. The same bulletin lists bones , muscles , and nerves as separate sub-topics, and two much larger service domains depend on them: design (10 questions — elevations, facial shapes, form and texture, head form, profiles, shape, balance, and proportion) and shaving (8 questions — face areas, technique, steaming and lathering, strokes, finishing). If you cannot find the parietal ridge, you cannot place a fade. If you cannot find the mandible, you cannot design a beard line. HLO draws theory items from Milady's Standard Professional Barbering, 5th edition (2011), and Pivot Point Barbering Fundamentals, 1st edition (2018). This section is the bone map those later services assume.

Why bones are a barbering subject in Oregon

ORS 690.005(2) defines barbering as cosmetic, not medical, work: cutting and styling hair; applying tonics; massaging the scalp, face, and neck; and shaving, trimming, or cutting the beard or mustache. None of that is surgery. All of it happens on a living skull. The skull is not a smooth egg. It has a nape bump, a ridge where the sides turn into the top, cheek prominences, and a movable jaw. Those are the planes you cut to.

Oregon does not ask you to read radiographs or treat a fracture. It does ask you to name the eight bones of the cranium and the fourteen bones of the face in the language of the cited textbooks — including the older word turbinal for the inferior nasal conchae.

The cranium: eight bones, six names

The cranium is the bony case that protects the brain. Eight bones form it. Two of those names come in pairs. A usable mnemonic that matches the six names is Old People From Texas Eat Spiders — occipital, parietal, frontal, temporal, ethmoid, sphenoid.

Occipital (1)

The occipital bone is the hindmost bone of the skull. It forms the back and base of the cranium. The external occipital protuberance (inion) is the palpable bump in the midline of the nape. That bump is a fade and taper reference: it tells you where the head stops being a vertical nape and starts to curve under. The nape hairline sits over this bone. Many napes grow up toward the crown; reading that grain over the occipital bone is how you avoid an against-the-grain nape shave that later ingrows. The foramen magnum — the hole for the spinal cord — is in the occipital bone. You will not palpate it. Textbooks name it, so you should too.

Parietal (2)

The two parietal bones form the sides and the crown (top) of the cranium. The parietal ridge (parietal crest) is the widest part of the head — the line where the vertical side wall turns into the curved top. A skin fade that ignores the parietal ridge either shelves on the side or blows a hole in the round. Clipper-over-comb and shear-over-comb both travel this ridge. Head form items in the 10-question design block are this curve by another name: a flat-sided head and a round head do not take the same fade line.

Frontal (1)

The frontal bone forms the forehead. The frontal eminences are the two rounded prominences. Fringe, bangs, a widow's peak, and receding front corners all live on this bone. Design items that mention head form start here: a prominent frontal bone reads as a high forehead; a low hairline reads as a short forehead. You do not move the bone. You decide whether the fringe should shorten the forehead visually or leave it alone.

Temporal (2)

The two temporal bones form the sides of the head in the ear region. The mastoid process is the bony prominence behind the ear. Temple fades, around-the-ear clipper work, and the hairline in front of the ear all sit on temporal bone. Do not confuse the temporal bone with the temporalis muscle that covers it — that mix-up is a classic wrong answer.

Ethmoid (1)

The ethmoid bone is a light, spongy bone between the eye sockets. It forms part of the nasal cavities. It is not a cutting plane. It is on the cranial list, so you name it.

Sphenoid (1)

The sphenoid bone is the bat- or butterfly-shaped bone at the base of the cranium. It joins all other cranial bones — textbooks call it the bone that binds the cranium together. Like the ethmoid, it is not a surface guide for a haircut, but it is a standard exam name. If an item asks which cranial bone articulates with all the others, the answer is sphenoid.

The face: fourteen bones

Facial bones form the eye sockets, nasal cavities, and the mouth. Fourteen bones; some are paired. Design questions about facial shape and profile are really questions about the relative width of the zygomatic bones, the width of the mandible, and the height of the frontal bone.

Nasal (2)

The two nasal bones form the bridge of the nose. They matter for profile — straight, convex, or concave — a named design sub-topic on the bulletin.

Lacrimal (2)

The two lacrimal bones are the smallest facial bones. They sit at the front inner wall of each eye socket (the tear-duct region). Not a cutting guide. Still on the list.

Zygomatic (2)

The two zygomatic bones (malar bones, cheekbones) form the prominence of the cheeks. Cheekbone height changes facial shape: a wide zygomatic pair reads as a diamond or round face; a narrow pair with a wide jaw reads heavier at the mandible. The beard cheek line is drawn relative to the zygomatic prominence — too high and the face looks hollow; too low and the cheek looks heavy. Highlighting or softening cheekbones is a design decision, not a medical one.

Maxillae (2)

The two maxillae form the upper jaw. They are immovable . They house the upper teeth and make up most of the upper face. A mustache sits on the skin over the maxillae. Do not call the maxillae movable; that is the mandible's job.

Mandible (1)

The mandible is the lower jaw. It is the largest and strongest bone of the face and the only movable bone of the skull . The mental protuberance is the chin. Jawline beard design, strap lines, and the lower outline of a goatee all follow the mandible. The mandible articulates with the temporal bone at the temporomandibular joint. When a client talks or clenches while you outline a beard, the landmark you just cut has moved. Ask the jaw to rest.

Turbinal (2)

Turbinal bones (inferior nasal conchae, turbinates) are thin, spongy bones on the outer walls of the nasal depression. Barbering textbooks still use turbinal . Do not skip the word because a medical atlas says concha. HLO's sources use the textbook name.

Vomer (1)

The vomer is a single flat bone that forms part of the nasal septum, the midline divider of the nose.

Palatine (2)

The two palatine bones form the floor and outer wall of the nose, the roof of the mouth, and part of the floor of the orbits. Not a cutting guide; on the list.

Related bone that is not on the cranial or facial list

The hyoid bone is a U-shaped bone at the base of the tongue, in the front of the throat. It does not articulate with another bone. It is not a cranial or facial bone. Do not put it on a bones-of-the-head-and-face list. It is a caution landmark near the thyroid cartilage (Adam's apple) when you shave the anterior neck.

How to palpate the shop landmarks

You do not need a model skull in the shop. With the client seated:

Midline nape: the bump you can rest a finger on is the external occipital protuberance .

Side of the head: stand a comb against the vertical wall. Where the comb leaves the head is the parietal ridge .

Forehead: the frontal bone is the whole plane above the brows.

Behind the ear: the mastoid process is the hard knob the clipper must go around, not over.

Cheek: have the client smile; the zygomatic prominence is the high point of the cheek.

Jaw: have the client open and close; the moving bone is the mandible .

Bone / location / barber landmark

Bone Location Barber landmark

Occipital Back and base of the cranium External occipital protuberance — nape fade and taper reference; nape hairline

  • Parietal (2) Sides and crown Parietal ridge — round of the head; blend and fade travel
  • Frontal Forehead Fringe, front hairline, recession corners, forehead height
  • Temporal (2) Sides in the ear region Mastoid process behind the ear; temple; around-the-ear clipper work
  • Ethmoid Between the eye sockets; part of the nasal cavity Named cranial bone; not a cutting plane
  • Sphenoid Base of the cranium; joins all other cranial bones Binding bone of the cranium; not a surface guide
  • Nasal (2) Bridge of the nose Profile (straight, convex, concave)
  • Lacrimal (2) Front inner wall of the eye socket Smallest facial bones
  • Zygomatic (2) Cheeks Cheekbone prominence; beard cheek line; facial-shape design
  • Maxillae (2) Upper jaw Immovable; mustache canvas
  • Mandible Lower jaw Only movable skull bone; jawline and chin for beard design
  • Turbinal (2) Outer walls of the nasal depression Textbook name for inferior nasal conchae
  • Vomer Nasal septum Midline divider of the nose
  • Palatine (2) Roof of mouth / floor of nose Named facial bones; not a cutting plane

Count check for the exam: 8 cranial (occipital 1 + parietal 2 + frontal 1 + temporal 2 + ethmoid 1 + sphenoid 1) and 14 facial (nasal 2 + lacrimal 2 + zygomatic 2 + maxillae 2 + mandible 1 + turbinal 2 + vomer 1 + palatine 2).

Oregon shop scenario

A client in a licensed Portland facility wants a mid-skin fade, a square beard, and a hard cheek line. You start at the nape and find the external occipital protuberance so the fade does not jump the nape curve. You locate the parietal ridge before you decide where the blend must travel over the round of the head. At the front you read the frontal bone and the existing hairline instead of inventing a fringe that fights the forehead. For the beard you follow the mandible for the jawline and the zygomatic prominence for the cheek line — high enough to show the cheekbone, not so high that the face looks gaunt. The mastoid process behind the ear keeps the clipper from diving into the ear. You are not practicing medicine. You are cutting to bones Oregon already told you to name, because the 10 design questions and the 8 shaving questions will assume you did.

Loading diagram... Cranial and facial bones Oregon barbers must name