Study guide
12.2 Clippers, Combs, and Brushes
Oregon Barber License Exam
Track your progress as you read
Finished sections get a check mark.
1 Introduction & Oregon Barber Exam Overview
1.1 Current Exam Facts 1.2 Pathways, Fees, and Retake Rules 1.3 How to Study Both Oregon Written Exams
2 Hair Structure, Trichology & Growth
2.1 Trichology and Hair Structure 2.2 Hair Growth Cycles and Patterns 2.3 Hair Color, Pigment, and Melanin in Hair
3 Hair Loss, Hair Disorders & Scalp Disorders
3.1 Hair Loss and Alopecia Types 3.2 Hair Diseases and Disorders 3.3 Scalp Diseases and Disorders
4 Skin Histology
4.1 Structure of the Skin 4.2 Melanin and Skin Pigmentation 4.3 Skin Diseases and Disorders
5 Anatomy of the Head and Face
5.1 Bones of the Head and Face 5.2 Muscles of the Head, Face, and Neck 5.3 Nerves of the Head and Face
6 Microbiology for Oregon Barbers
6.1 Bacteria and Viruses 6.2 Immunity and Parasites
7 Client Consultation, Analysis & Treatments
7.1 Client Consultation and Physician Referral 7.2 Hair, Scalp, and Skin Analysis 7.3 Hair, Scalp, and Skin Treatments
8 Hair Care & Skin Care Procedures
8.1 Scalp Massage and Shampoo Service 8.2 Facials and Facial Massage
9 Design Elements
9.1 Facial Shapes, Head Form, and Profiles 9.2 Elevations, Form, and Texture 9.3 Shape, Balance, and Proportion
10 Cutting and Styling Procedures
10.1 Shear Cutting and Razor Cutting 10.2 Clipper Cutting, Blending, Tapering, and Fading 10.3 Arching, Outlines, and Head Shaving 10.4 Thermal Styling and Artificial Hair
11 Shaving Procedures
11.1 Areas of the Face and Shaving Technique 11.2 Steaming, Lathering, and Shaving Strokes 11.3 Finishing Step After the Shave
12 Implements, Tools and Equipment
12.1 Shears and Razors 12.2 Clippers, Combs, and Brushes 12.3 Capes, Drapes, and Massage Tools
13 Product Knowledge and Chemistry
13.1 Shampoos and Conditioners 13.2 Styling Aids and Shaving Products 13.3 pH, Water, and Cosmetic Chemistry
14 Safety, Infection Control & Federal Standards
14.1 Safe Usage and Safety Devices 14.2 OSHA, FDA, EPA, and CDC Standards
15 Oregon Definitions & Scope of Barbering
15.1 Statutory Definition and Scope of Barbering 15.2 Certificate, Authorization, and Fields of Practice 15.3 Facility, Freelance, and Independent Contractor Definitions 15.4 Board, HLO, and Key OAR 817 Terms
16 Facility Licensure & Physical Standards
16.1 Facility License and Application Requirements 16.2 Water Supply, Restrooms, Floors, Walls, and Ceilings 16.3 Residential Facilities and Temporary Facility Permits
17 Infection Control in the Oregon Shop
17.1 Servicing Clients 17.2 Towels, Linens, and Articles in Contact with Clients 17.3 Disinfecting Non-Electrical and Electrical Tools 17.4 Storage of Tools, Refuse, and Waste
18 Shop Hygiene, Equipment & Client Protection
18.1 Hairpieces, Equipment, and Pets in Facilities 18.2 Cleanable, Non-Absorbent Surfaces 18.3 Client Protection During Services
19 Practice Standards & Business Authorizations
19.1 Practice Standards and Professional Conduct 19.2 Freelance Authorization and Independent Contractor 19.3 Posting Requirements and Facility Operations
20 Examinations, Licensing & Renewal
20.1 Written Examination Rules and Retake Policy 20.2 Practitioner Certificate and 746-Hour Curriculum 20.3 Renewal, Bloodborne Pathogens Training, Inactive and Reinstatement
21 Chemicals, Storage & Civil Penalties
21.1 Chemical Use, Storage, and Formaldehyde 21.2 Handling and Disposing of Chemicals 21.3 Civil Penalties and HLO Enforcement
12.2 Clippers, Combs, and Brushes
Key Takeaways Explain This Topic AI
The 12-item Implements block names clippers, combs, and brushes as test objects; Oregon then splits them by electrical versus nonelectrical and by sharp versus non-sharp.
OAR 817-010-0069: electrical clipper blades are cleared of hair then completely saturated with a high-level disinfectant solution, spray, or foam; other electrical tools get a low-level disinfectant after debris is removed.
OAR 817-010-0068(6): reusable combs and brushes without sharp edges are immersed in 1,000 ppm commercial quats or another low-level disinfectant after soap-or-detergent cleaning and a clear-water rinse.
OAR 817-010-0068(2): tools that contact clients and cannot be disinfected or sterilized must be disposed of after use — Oregon's real rule for a natural-bristle neck duster, not a named statewide ban.
Name magnetic, rotary, and pivot clippers, plus trimmers/edgers/outliners and guards; name cutting, barber, taper, wide-tooth, and rattail combs; name paddle, vent, round, and neck-duster brushes.
Last updated: August 2026
The remaining portable tools on the bulletin's 12-item list are clippers, combs, and brushes . OAR 817-005-0005 puts all three inside tools and implements — portable articles and instruments used on clients. The laws paper then splits them. Electrical clipper blades are a high-level saturate under OAR 817-010-0069 . The rest of an electrical tool is low-level. Combs and brushes without sharp edges are a 1,000 ppm quat (or other low-level) immersion after soap and rinse under OAR 817-010-0068(6) . A tool that cannot be disinfected is not “wiped and reused.” It is disposed of after use ( OAR 817-010-0068(2) ).
HLO still expects the textbook names. Magnetic versus rotary versus pivot is a theory fact. Quat ppm is a laws fact. The same station uses both.
Clipper motors: magnetic, rotary, pivot
Barbering textbooks classify clippers by how the motor drives the blade. Oregon does not license one motor and forbid another. It does expect you to pick a motor that can finish the cut without chewing, then disinfect the blades as electrical clipper blades.
Type How it runs Shop feel Typical use
Magnetic (electromagnetic / vibratory) Alternating magnetic field oscillates the armature Lighter, often louder; can bog in thick wet hair Tapers, fades, dry cutting
Rotary Rotary motor turns the blade drive Heavier, more constant power Bulk removal, dense or damp hair
Pivot Pivot motor drives a wider blade stroke Stronger bite, often less vibration than rotary Heavy hair, wet work, all-over clipper cuts
Trimmers, edgers, outliners, and guards
Trimmers , edgers , and outliners are smaller electrical clippers with little or no guard. They cut the hairline, around the ears, the nape, and the beard outline. They are still electrical tools. Their blades are still electrical clipper blades . A T-blade outliner does not drop to the comb rule because it is small.
Guards (attachment combs) set a numbered length. A guard that contacted hair is a tool. If it can be cleaned and immersed, process it as a non-sharp nonelectrical implement: remove hair, soap, rinse, 1,000 ppm quats or other low-level immersion. If a foam or damaged guard cannot be disinfected, dispose of it. Do not leave a used #2 guard in the clean drawer “because plastic is fine.”
Do not immerse the clipper motor housing . Hair and product come off the body; then a low-level disinfectant is used according to the label ( OAR 817-010-0069(1) ). The blades are the exception.
Electrical blades versus everything else electrical
OAR 817-010-0069 is the electrical-tool rule. Current text:
All electrical tools and implements, with the exception of clipper blades , must be disinfected before each use: remove all hair and all foreign material, then disinfect with a low-level disinfectant used according to the manufacturer's instructions.
Electrical clipper blades must be disinfected before each use: remove all hair and all foreign material, then completely saturate the blade with a high-level disinfectant solution, spray, or foam used according to the manufacturer's instructions.
Electrical clipper blades may be sterilized using an approved method in OAR 817-010-0065 .
Saturate means the teeth are wet with high-level product for the label's contact time. A dry brush-off is not disinfection. A low-level spray on the blades is the wrong level. Running the clipper until it “looks clean” is not a step in 817-010-0069. Blade washers and blade banks help you keep a second set in process so you are not tempted to skip the saturate between two fades.
Combs: cutting, barber, taper, wide-tooth, rattail
Name the comb by job, then process every reusable comb as a non-sharp nonelectrical tool.
- Comb Shape Job
- Cutting comb Even, mid-length teeth Shear-over-comb, general cutting
- Barber comb Narrow, fine-to-medium teeth; often hard rubber Clipper-over-comb, tight tapers
- Taper comb Graduated teeth (short to long) Blending and clipper-over-comb on curves
- Wide-tooth comb Wide spacing Detangle wet hair; reduce breakage
- Rattail (tail) comb Fine teeth plus a thin tail Parts, sections, and precision lines
A metal barber comb is still a comb, not a shear. It has no sharp-edged classification under OAR 817-005-0005 unless it is actually a pointed or sharp implement. Process it through OAR 817-010-0068(5)–(6) .
Brushes: paddle, vent, round, neck duster
- Brush Form Job
- Paddle Wide, flat Smooth, dry, and finish longer hair
- Vent Open cushion, widely spaced pins Faster dry; lift without as much tension
- Round Cylindrical Curl, bend, and thermal finish
- Neck duster Soft bristle cluster Dust loose hair from the neck and ears
Reusable hard-backed brushes that can be washed and fully immersed follow the same non-sharp path as combs: remove hair, soap or detergent and water, rinse, then complete immersion in 1,000 ppm commercial quats or another low-level disinfectant per the manufacturer ( OAR 817-010-0068(6) ). Do not toss a hair-loaded brush into the quat jar. Hair in the jar is foreign material and drops the bath below “adequate strength” ( OAR 817-010-0068(10) ).
Neck dusters: teach Oregon honestly
Many states name-ban natural-bristle neck dusters because the bristle bed cannot be disinfected. Oregon does not publish a separate named neck-duster ban. The current rule is functional and stricter than a rumor:
OAR 817-010-0068(2): all tools and implements that come in direct contact with clients, and cannot be disinfected or sterilized, must be disposed of after use.
A natural-bristle neck duster packs hair, sebum, and microbes against the base. It cannot be cleaned and immersed the way a hard-rubber comb can. If it cannot be disinfected, it cannot be reused. Dispose of it after the client, or do not use that object. Safer Oregon practice is a fresh neck strip , a disinfectable synthetic brush that actually completes 817-010-0068(6), or a single-use duster that goes in the covered waste can. A wooden-handle bristle duster hanging on a hook “for everyone” is a soiled shared tool, not a tradition HLO honors.
Do not answer a laws item with “Oregon bans neck dusters by name” if the options include the cannot-disinfect-then-dispose sentence. The sentence is the law.
Non-sharp immersion, in order
For combs, brushes, rollers, rods, and similar nonelectrical tools without sharp edges, OAR 817-010-0068(5)–(6) is ordered:
Remove all hair and all foreign material.
Clean thoroughly with soap or detergent and water.
Rinse thoroughly with clear, clean water.
Completely immerse, according to manufacturer's instructions, in a solution containing 1,000 ppm of a commercial quaternary ammonium compound or other low-level disinfectant used according to the manufacturer's instructions.
Low-level still means EPA-registered bactericidal, germicidal, fungicidal, and limited virucidal ( OAR 817-005-0005 ). Then store the dry, disinfected comb with the new, disinfected, and cleaned set — separately from all others ( OAR 817-010-0075 ).
Shop scenario
A Salem barber finishes a skin fade, knocks hair off the clipper with a neck duster, sprays the blades with a low-level counter spray, and starts the next client. Two misses. The blades needed a high-level saturate (solution, spray, or foam) after hair was removed, not a low-level wipe. The natural-bristle duster that just swept another client's hair onto this client's neck cannot be disinfected, so it should have been discarded after the first client — or never used. Correct station: second blade set already high-level processed, clipper body low-level wiped, neck cleaned with a fresh neck strip, reusable comb sitting in the 1,000 ppm bath for the label time, clean combs only in the clean drawer.
Loading diagram... Oregon clipper, comb, and brush disinfection: high-level blades, low-level body, quat immersion, or dispose