Study guide

Soil pH, diagnosis, and exchange capacity

Oregon Landscape Contractor License Study Guide 2026

Track your progress as you read

Finished sections get a check mark.

1 1. Licensing and business: 1

Exam structure, reference use, and license routes Oregon jurisdiction, license phases, and eligibility Bonds, insurance, and financial responsibility

2 2. Licensing and business: 2

Employee status, paid work, and payroll calculations Hiring, breaks, sick time, and workplace protections Contracts, cancellation, guarantees, and liens

3 3. Licensing and business: 3

LCP supervision and clear project communication Direct costs and overhead allocation Margin, markup, changes, and job costing

4 4. Site safety and utilities

Excavation safety and hazard controls Oregon 811 notices and utility protection

5 5. Soil science and site preparation: 1

Soil texture, structure, and pore space Density, regional profiles, and soil water Soil pH, diagnosis, and exchange capacity

6 6. Soil science and site preparation: 2

Amendments and fertilizer calculations Compaction, decompaction, and topsoil protection Topsoil placement, finish grades, and weeds

7 7. Plants, turf, and establishment: 1

Planting plans, stock sizes, and quantity takeoffs Botanical identification, plant types, and growth habits Mature size, landscape use, and exposure decisions

8 8. Plants, turf, and establishment: 2

Hardiness, microclimates, and plant names Native plant choices and invasive plants Nursery stock, root flares, and planting depth

9 9. Plants, turf, and establishment: 3

Backfill, staking, and mulch Turf species, mixtures, and site suitability Seed, sod, and establishment calculations

10 10. Plants, turf, and establishment: 4

Pruning and integrated pest management Pest diagnosis, weeds, and pesticide credentials

11 11. Paving and concrete: 1

Pavement foundations, drainage, and excavation Separation fabric, aggregate, and compaction Bedding, restraints, and square layout

12 12. Paving and concrete: 2

Paver laying, cuts, patterns, and joint fill Natural stone and rigid or flexible setting Concrete mixture, placement, and finishing

13 13. Paving and concrete: 3

Concrete joints and curing

14 14. Walls and exterior structures: 1

Segmental wall systems and foundations Wall drainage, backfill, and geogrid Earth pressure, stone walls, and footings

15 15. Walls and exterior structures: 2

Masonry reinforcement, wall permits, and failure Lumber dimensions, grades, fasteners, and finishing Treated lumber and outdoor exposure

16 16. Walls and exterior structures: 3

Wood durability, hardware, and post geometry Fences, decks, ledgers, and arbors Landscape steps, stairs, and safe transitions

17 17. Walls and exterior structures: 4

Low-voltage lighting design, wiring, and commissioning Water features, pumps, liners, and water quality

18 18. Design, grading, and drainage: 1

Landscape design, circulation, and coordinated details Surveying, benchmarks, and elevation checks Planting on roofs, decks, and other structures

19 19. Design, grading, and drainage: 2

Drawing sets, legends, and scale Contours, spot elevations, and benchmarks Slope ratios, pitch, and foundation fall

20 20. Design, grading, and drainage: 3

Earthwork, accessible routes, and swales Water sources and French drains Inlets, conveyance, cleanouts, and outlets

21 21. Design, grading, and drainage: 4

Bioretention sizing, media, and plants Swales and current DEQ erosion controls

22 22. Irrigation design and operation: 1

Irrigation site survey and available water Hydrozones and plant-based irrigation design Sprinkler layout, arcs, and zone flow accounting

23 23. Irrigation design and operation: 2

Irrigation symbols, plans, and material takeoffs Pressure, elevation, friction, and budgets Sprinkler types, pressure, and coverage

24 24. Irrigation design and operation: 3

Matched precipitation and runtime formulas Drip irrigation, filtration, and wetted root volume Pipe materials, bore, velocity, and valves

25 25. Irrigation design and operation: 4

Valve service, wiring, and smart controls Controller circuits and electrical troubleshooting Plant culture and root-zone watering decisions

26 26. Irrigation design and operation: 5

Evapotranspiration, soil depletion, and runtime Catch-can audits and irrigation repair diagnosis Installation, testing, winterization, and startup

27 27. Backflow and potable protection: 1

Cross-connections, hazards, and reverse flow Air gaps and physical potable-water separation Vacuum breakers, checks, and RP assemblies

28 28. Backflow and potable protection: 2

Potable, irrigation, and reclaimed-water piping Backflow assembly selection and hydraulic cases Backflow installation, winter care, and reports

Soil pH, diagnosis, and exchange capacity

Key Takeaways Explain This Topic AI

Regional pH patterns are tendencies, not treatment prescriptions.

Nutrient symptoms require diagnosis and supporting tests.

Lime and sulfur rates depend on buffering, target plants, and product properties.

Last updated: October 2026

Soil chemistry dictates how effectively landscape plants utilize applied nutrients and water. A soil may contain abundant mineral nutrients, yet plants may exhibit severe chlorosis and stunted growth because an adverse soil pH locks those elements into insoluble compounds. Oregon landscape contractors must understand the regional chemical divergence between western and eastern soils, how colloidal surfaces retain nutrients against leaching via Cation Exchange Capacity (CEC), and how to properly calculate fertilizer and soil amendment applications.

Soil pH Scale and Regional Pacific Northwest Profiles

Soil pH measures the hydrogen ion concentration ( [ H + ] [\text{H}^+] [ H + ] ) on a logarithmic scale from 0 to 14. A pH of 7.0 is neutral; values below 7.0 are acidic, and values above 7.0 are alkaline (basic). Because the scale is logarithmic, each whole unit shift represents a tenfold change in acidity. A soil at pH 5.0 is ten times more acidic than a soil at pH 6.0 and one hundred times more acidic than a soil at pH 7.0.

Regional patterns are starting points

High rainfall commonly leaches bases from western soils, while some dry interior soils accumulate carbonates. These are tendencies, not a rule that every eastern Oregon soil is alkaline or every western soil needs lime. Volcanic soils, imported fill, irrigation water, and past amendments can change the result. Use a representative laboratory sample and the target plants' requirements before prescribing treatment.

Plant pH Preferences

General Landscape Ornamentals & Cool-Season Turf: Optimal range is pH 6.0 to 7.0 . In this window, microbial activity is highest, and macronutrient and micronutrient availability is balanced.

Ericaceous (Acid-Loving) Plants: Rhododendrons, azaleas, camellias, blueberries, mountain laurels, and pieris thrive in soils from pH 4.5 to 5.5 . Planting these species in Central or Eastern Oregon native soils without intensive root-zone acidification results in fatal iron deficiency.

Nutrient Availability Across the pH Spectrum

Plant roots absorb nutrients as dissolved ions from the soil solution. Soil pH directly controls whether these ions remain dissolved or precipitate out into insoluble mineral crystals.

  • Pattern Possible nutrient concern Important competing explanations
  • Older leaves uniformly pale Nitrogen shortage Root stress, overwatering, inadequate light
  • Young leaves pale between green veins Iron availability High pH, damaged roots, other nutrient problems
  • Older leaves pale between veins Magnesium concern Species response and other disorders
  • Leaf margins scorched Potassium or salt concern Drought, wind, fertilizer injury

Symptoms suggest a diagnostic question; they do not prove a nutrient deficiency. Soil pH affects solubility and microbial processes, but ideal availability is not a set of exact universal windows. Test before adding a nutrient, and correct drainage or root injury when those are the underlying problem.

Important

The Phosphorus Fixation Trap: Phosphorus is uniquely vulnerable to soil pH extremes. In acidic Western Oregon soils (pH < 5.8), applying standard granular phosphate fertilizer causes rapid "P-fixation" into insoluble iron and aluminum phosphates that plant roots cannot access. Raising the pH to 6.5 with agricultural lime frees up native and applied phosphorus before costly fertilizer is applied.

Soil pH Adjustment: Liming and Acidification

Modifying soil pH requires understanding soil buffering capacity—the soil's natural ability to resist changes in pH. High-clay and high-organic soils have vast numbers of exchange sites buffering the soil solution and require significantly higher amendment rates than sandy soils.

Raising pH using a soil-test recommendation

Agricultural lime neutralizes acidity. The required amount depends on buffering, target pH, product neutralizing value, fineness, and incorporation depth. Calcitic lime supplies calcium; dolomitic lime also supplies magnesium and is appropriate when the test indicates that need. Do not automatically apply dolomite to every western Oregon site.

Use the laboratory recommendation and product instructions to determine application and any split treatments. Reaction takes time and depends on moisture, contact, and particle size; a fixed three-to-six-month completion guarantee is inappropriate. Incorporating lime during bed preparation increases contact, while established turf topdressing acts more slowly. Retest before repeating treatment.

Lowering pH and avoiding overcorrection

Elemental sulfur is converted biologically to acid. Warmth, aeration, moisture, and buffering affect its rate and the required amount. Calcareous soils can resist practical acidification because carbonates neutralize added acid. Select adapted plants where sustained pH change is unrealistic.

Apply only a tested recommendation and labeled rate, then allow time and retest. Excess sulfur or salts can injure roots. Do not promise a fixed pH decrease in two months or assume iron sulfate and sulfur have interchangeable application rates. A diagnosed iron problem may require a product compatible with the soil pH rather than simply adding more ordinary iron.

Cation Exchange Capacity (CEC) & Base Saturation

Cation Exchange Capacity (CEC) is the measure of a soil's ability to hold positively charged nutrient ions (cations) through electrostatic attraction. It is expressed in milliequivalents per 100 grams of oven-dry soil (meq/100g) or centimoles of positive charge per kilogram (cmol(+)/kg).

Clay mineral plates and organic humus molecules possess net negative electrical surface charges. Positively charged plant nutrient cations cling to these negative sites, preventing them from being washed away by rain or irrigation: Essential Plant Cations: Ca 2 + , Mg 2 + , K + , NH 4 + , Fe 2 + , Mn 2 + , Zn 2 + , Cu 2 + \text{Essential Plant Cations: } \text{Ca}^{2+}, \quad \text{Mg}^{2+}, \quad \text{K}^+, \quad \text{NH}_4^+, \quad \text{Fe}^{2+}, \quad \text{Mn}^{2+}, \quad \text{Zn}^{2+}, \quad \text{Cu}^{2+} Essential Plant Cations: Ca 2 + , Mg 2 + , K + , NH 4 + ​ , Fe 2 + , Mn 2 + , Zn 2 + , Cu 2 + Acidifying Cations: H + , Al 3 + \text{Acidifying Cations: } \text{H}^+, \quad \text{Al}^{3+} Acidifying Cations: H + , Al 3 +

Illustrative CEC ranges below show orders of magnitude; mineralogy, organic matter, pH, and the test method can produce values outside them. Measure the actual soil before using a value for fertility decisions.

  • Soil Component / Texture Illustrative CEC Range (meq/100g) Nutrient Retention & Buffering Characteristics
  • Pure Sand 1 to 5 Extremely low retention; cations leach rapidly; low buffering capacity
  • Sandy Loam 5 to 10 Low nutrient holding; requires split, frequent fertilizer applications
  • Loam & Silt Loam 10 to 25 Moderate to high retention; excellent agricultural and horticultural balance
  • Clay & Clay Loam 25 to 45 High retention; nutrients bind strongly; high buffering capacity
  • Organic Humus 100 to 300 Immense nutrient holding capacity; abundant negative functional groups