Study guide

Soil texture, structure, and pore space

Oregon Landscape Contractor License Study Guide 2026

Track your progress as you read

Finished sections get a check mark.

1 1. Licensing and business: 1

Exam structure, reference use, and license routes Oregon jurisdiction, license phases, and eligibility Bonds, insurance, and financial responsibility

2 2. Licensing and business: 2

Employee status, paid work, and payroll calculations Hiring, breaks, sick time, and workplace protections Contracts, cancellation, guarantees, and liens

3 3. Licensing and business: 3

LCP supervision and clear project communication Direct costs and overhead allocation Margin, markup, changes, and job costing

4 4. Site safety and utilities

Excavation safety and hazard controls Oregon 811 notices and utility protection

5 5. Soil science and site preparation: 1

Soil texture, structure, and pore space Density, regional profiles, and soil water Soil pH, diagnosis, and exchange capacity

6 6. Soil science and site preparation: 2

Amendments and fertilizer calculations Compaction, decompaction, and topsoil protection Topsoil placement, finish grades, and weeds

7 7. Plants, turf, and establishment: 1

Planting plans, stock sizes, and quantity takeoffs Botanical identification, plant types, and growth habits Mature size, landscape use, and exposure decisions

8 8. Plants, turf, and establishment: 2

Hardiness, microclimates, and plant names Native plant choices and invasive plants Nursery stock, root flares, and planting depth

9 9. Plants, turf, and establishment: 3

Backfill, staking, and mulch Turf species, mixtures, and site suitability Seed, sod, and establishment calculations

10 10. Plants, turf, and establishment: 4

Pruning and integrated pest management Pest diagnosis, weeds, and pesticide credentials

11 11. Paving and concrete: 1

Pavement foundations, drainage, and excavation Separation fabric, aggregate, and compaction Bedding, restraints, and square layout

12 12. Paving and concrete: 2

Paver laying, cuts, patterns, and joint fill Natural stone and rigid or flexible setting Concrete mixture, placement, and finishing

13 13. Paving and concrete: 3

Concrete joints and curing

14 14. Walls and exterior structures: 1

Segmental wall systems and foundations Wall drainage, backfill, and geogrid Earth pressure, stone walls, and footings

15 15. Walls and exterior structures: 2

Masonry reinforcement, wall permits, and failure Lumber dimensions, grades, fasteners, and finishing Treated lumber and outdoor exposure

16 16. Walls and exterior structures: 3

Wood durability, hardware, and post geometry Fences, decks, ledgers, and arbors Landscape steps, stairs, and safe transitions

17 17. Walls and exterior structures: 4

Low-voltage lighting design, wiring, and commissioning Water features, pumps, liners, and water quality

18 18. Design, grading, and drainage: 1

Landscape design, circulation, and coordinated details Surveying, benchmarks, and elevation checks Planting on roofs, decks, and other structures

19 19. Design, grading, and drainage: 2

Drawing sets, legends, and scale Contours, spot elevations, and benchmarks Slope ratios, pitch, and foundation fall

20 20. Design, grading, and drainage: 3

Earthwork, accessible routes, and swales Water sources and French drains Inlets, conveyance, cleanouts, and outlets

21 21. Design, grading, and drainage: 4

Bioretention sizing, media, and plants Swales and current DEQ erosion controls

22 22. Irrigation design and operation: 1

Irrigation site survey and available water Hydrozones and plant-based irrigation design Sprinkler layout, arcs, and zone flow accounting

23 23. Irrigation design and operation: 2

Irrigation symbols, plans, and material takeoffs Pressure, elevation, friction, and budgets Sprinkler types, pressure, and coverage

24 24. Irrigation design and operation: 3

Matched precipitation and runtime formulas Drip irrigation, filtration, and wetted root volume Pipe materials, bore, velocity, and valves

25 25. Irrigation design and operation: 4

Valve service, wiring, and smart controls Controller circuits and electrical troubleshooting Plant culture and root-zone watering decisions

26 26. Irrigation design and operation: 5

Evapotranspiration, soil depletion, and runtime Catch-can audits and irrigation repair diagnosis Installation, testing, winterization, and startup

27 27. Backflow and potable protection: 1

Cross-connections, hazards, and reverse flow Air gaps and physical potable-water separation Vacuum breakers, checks, and RP assemblies

28 28. Backflow and potable protection: 2

Potable, irrigation, and reclaimed-water piping Backflow assembly selection and hydraulic cases Backflow installation, winter care, and reports

Soil texture, structure, and pore space

Key Takeaways Explain This Topic AI

Texture describes sand, silt, and clay proportions.

Structure describes aggregates and pore arrangement.

Compaction especially damages larger pores and aeration.

Last updated: October 2026

Successful landscape installation and long-term plant establishment depend upon a rigorous understanding of the physical properties of soil. For landscape contractors operating in Oregon, soil conditions vary drastically across geographic regions—from the deeply weathered, iron-rich clays of the Willamette Valley foothills to the rapidly draining volcanic ash soils of Central Oregon and the moisture-laden marine sediments of the Pacific Coast. Evaluating soil texture, structure, and water movement prior to plant installation or hardscape construction prevents catastrophic planting failures, surface ponding, and structural subsidence.

Soil Texture and the USDA Particle Classification

Soil texture refers to the relative proportion of inorganic mineral particles: sand , silt , and clay . Texture is a permanent physical property of the soil mineral fraction; unlike soil structure or fertility, it cannot be practically altered across a landscape site without excavating and replacing the entire soil volume.

The United States Department of Agriculture (USDA) classifies soil mineral separates based strictly on equivalent spherical diameter:

Mineral Separate Particle Diameter Range Visual & Tactile Properties Specific Surface Area

Sand 0.05 mm to 2.0 mm Gritty feel; visible to naked eye; rounded or angular grains Very low (~0.01 to 0.1 m²/g)

Silt 0.002 mm to 0.05 mm Smooth, floury feel when dry; slippery/soapy when wet; invisible to naked eye Moderate (~1.0 m²/g)

Clay Less than 0.002 mm (< 2 µm) Sticky, plastic feel when wet; hard clods when dry; microscopic colloidal plates Extremely high (10 to 800 m²/g)

Particles larger than 2.0 mm are classified as rock fragments (gravels, cobbles, and stones) and are excluded from textural classification calculations, though they significantly diminish a soil's water-holding capacity.

The USDA Soil Texture Triangle

The USDA Soil Texture Triangle delineates 12 major textural classes based on percentages of sand, silt, and clay. A loam is not an equal one-third split of the three separates; rather, loam consists of roughly 40% sand, 40% silt, and 20% clay. Clay contributes substantial surface area and chemical activity even when it is not the largest fraction. Mineralogy, aggregation, and the complete textural proportions determine the resulting behavior; twenty-five percent clay is not a universal dividing line.

Caution

Adding a modest amount of sand is not a reliable way to improve clay soil. Particle packing, soil mineralogy, and the actual blend determine the result; there is no universal 80–85% threshold for making a satisfactory root medium. Improve drainage, preserve aggregation, and use tested amendments suited to the whole planting area. Avoid turning a small planting hole into a sharply different soil pocket.

Soil Structure and Ped Architecture

While texture describes particle-size proportions, soil structure describes the spatial arrangement and aggregation of individual soil particles into secondary clusters or units known as peds or aggregates. Structure governs the size, shape, and stability of pore spaces between particles.

Soil structure falls into five primary morphology types:

Granular (Spheroidal): Rounded peds typically 1 to 10 mm in diameter, characteristic of undisturbed A-horizon topsoils rich in organic matter. Granular structure offers the highest proportion of macropores, promoting rapid water infiltration and effortless root elongation.

Blocky (Angular and Subangular): Irregular, cube-shaped peds (5 to 50 mm) with flat faces and sharp (angular) or rounded (subangular) edges. Commonly found in B-horizon subsoils; facilitates moderate infiltration along ped faces.

Prismatic and Columnar: Vertically elongated pillars bounded by flat vertical faces. Prismatic peds have flat tops, while columnar peds feature rounded caps typically formed by sodium accumulation. Common in dense, swelling clay subsoils with slow permeability.

Platy: Thin, flat, horizontal plates or lenses stacked closely together. While occasionally formed by natural sedimentation, platy structure in urban landscapes is often induced by heavy equipment traffic and construction compaction. Platy structure dramatically impedes downward water percolation and horizontal root expansion.

Structureless (Single-Grain and Massive):

Single-grain: Individual particles do not adhere to one another (e.g., loose dune sand or coarse volcanic pumice).

Massive: Soil particles cling together in a solid, uniform sheet without natural cleavage lines or aggregate boundaries (e.g., unweathered marine clay or mechanically compacted subgrade).

Preservation of Aggregates

Aggregates are cemented together by clay-humus complexes, fungal hyphae, plant root exudates, and microbial glues like glomalin. Rotary tilling, particularly when soil is wet, mechanically pulverizes these natural aggregates into single grains, causing the surface to slake and crust after the first irrigation cycle.

Bulk Density, Porosity, and Pore Space Dynamics

An often-used teaching model has about half solid material and half pores, with a small organic fraction. This is a conceptual illustration, not a required recipe or a guarantee that water and air each occupy twenty-five percent at field capacity.

Macropores vs. Micropores

Total soil porosity is split between two distinct functional pore categories:

Macropores (aeration pores, >0.08 mm diameter): Inter-aggregate voids that drain freely by gravity. They facilitate gas exchange (oxygen entering root zones and carbon dioxide diffusing outward) and allow rapid water infiltration.

Micropores (capillary pores, <0.08 mm diameter): Small voids within aggregates that retain water against the pull of gravity through capillary and matric forces. Micropores provide reservoir water for plant roots.

Coarse soils commonly have more large conducting pores and drain readily; fine soils often retain more water in small pores. Total porosity and aeration also depend on structure, density, and moisture. A well-aggregated clay can contain important macropores, so texture alone does not prove poor aeration.