Study guide
Mature size, landscape use, and exposure decisions
Oregon Landscape Contractor License Study Guide 2026
Track your progress as you read
Finished sections get a check mark.
1 1. Licensing and business: 1
Exam structure, reference use, and license routes Oregon jurisdiction, license phases, and eligibility Bonds, insurance, and financial responsibility
2 2. Licensing and business: 2
Employee status, paid work, and payroll calculations Hiring, breaks, sick time, and workplace protections Contracts, cancellation, guarantees, and liens
3 3. Licensing and business: 3
LCP supervision and clear project communication Direct costs and overhead allocation Margin, markup, changes, and job costing
4 4. Site safety and utilities
Excavation safety and hazard controls Oregon 811 notices and utility protection
5 5. Soil science and site preparation: 1
Soil texture, structure, and pore space Density, regional profiles, and soil water Soil pH, diagnosis, and exchange capacity
6 6. Soil science and site preparation: 2
Amendments and fertilizer calculations Compaction, decompaction, and topsoil protection Topsoil placement, finish grades, and weeds
7 7. Plants, turf, and establishment: 1
Planting plans, stock sizes, and quantity takeoffs Botanical identification, plant types, and growth habits Mature size, landscape use, and exposure decisions
8 8. Plants, turf, and establishment: 2
Hardiness, microclimates, and plant names Native plant choices and invasive plants Nursery stock, root flares, and planting depth
9 9. Plants, turf, and establishment: 3
Backfill, staking, and mulch Turf species, mixtures, and site suitability Seed, sod, and establishment calculations
10 10. Plants, turf, and establishment: 4
Pruning and integrated pest management Pest diagnosis, weeds, and pesticide credentials
11 11. Paving and concrete: 1
Pavement foundations, drainage, and excavation Separation fabric, aggregate, and compaction Bedding, restraints, and square layout
12 12. Paving and concrete: 2
Paver laying, cuts, patterns, and joint fill Natural stone and rigid or flexible setting Concrete mixture, placement, and finishing
13 13. Paving and concrete: 3
Concrete joints and curing
14 14. Walls and exterior structures: 1
Segmental wall systems and foundations Wall drainage, backfill, and geogrid Earth pressure, stone walls, and footings
15 15. Walls and exterior structures: 2
Masonry reinforcement, wall permits, and failure Lumber dimensions, grades, fasteners, and finishing Treated lumber and outdoor exposure
16 16. Walls and exterior structures: 3
Wood durability, hardware, and post geometry Fences, decks, ledgers, and arbors Landscape steps, stairs, and safe transitions
17 17. Walls and exterior structures: 4
Low-voltage lighting design, wiring, and commissioning Water features, pumps, liners, and water quality
18 18. Design, grading, and drainage: 1
Landscape design, circulation, and coordinated details Surveying, benchmarks, and elevation checks Planting on roofs, decks, and other structures
19 19. Design, grading, and drainage: 2
Drawing sets, legends, and scale Contours, spot elevations, and benchmarks Slope ratios, pitch, and foundation fall
20 20. Design, grading, and drainage: 3
Earthwork, accessible routes, and swales Water sources and French drains Inlets, conveyance, cleanouts, and outlets
21 21. Design, grading, and drainage: 4
Bioretention sizing, media, and plants Swales and current DEQ erosion controls
22 22. Irrigation design and operation: 1
Irrigation site survey and available water Hydrozones and plant-based irrigation design Sprinkler layout, arcs, and zone flow accounting
23 23. Irrigation design and operation: 2
Irrigation symbols, plans, and material takeoffs Pressure, elevation, friction, and budgets Sprinkler types, pressure, and coverage
24 24. Irrigation design and operation: 3
Matched precipitation and runtime formulas Drip irrigation, filtration, and wetted root volume Pipe materials, bore, velocity, and valves
25 25. Irrigation design and operation: 4
Valve service, wiring, and smart controls Controller circuits and electrical troubleshooting Plant culture and root-zone watering decisions
26 26. Irrigation design and operation: 5
Evapotranspiration, soil depletion, and runtime Catch-can audits and irrigation repair diagnosis Installation, testing, winterization, and startup
27 27. Backflow and potable protection: 1
Cross-connections, hazards, and reverse flow Air gaps and physical potable-water separation Vacuum breakers, checks, and RP assemblies
28 28. Backflow and potable protection: 2
Potable, irrigation, and reclaimed-water piping Backflow assembly selection and hydraulic cases Backflow installation, winter care, and reports
Mature size, landscape use, and exposure decisions
Key Takeaways Explain This Topic AI
Use mature height and spread to evaluate space, clearance, and maintenance.
Plant function must fit exposure, water, soil, and seasonal behavior.
A hedge, screen, specimen, groundcover, and slope planting impose different selection criteria.
Last updated: October 2026
Define the purpose before choosing a name
A landscape plant can provide shade, screening, seasonal color, habitat, erosion protection, spatial enclosure, or a focal point. State the primary purpose and constraints before selecting a familiar species. A privacy screen beside a narrow walkway needs a different habit from a specimen tree in an open lawn. The same plant can succeed in one role and create a persistent conflict in another.
Describe the available volume above and below ground. Measure bed width, distance to paving, overhead clearance, utility constraints, sightlines, and expected root space. Nursery installation size is temporary; mature height and spread determine long-term fit. A small container does not make a naturally large species suitable for a permanent three-foot strip.
Mature dimensions vary with cultivar, climate, water, soil, and pruning. Use the specified cultivar's published range and allow for uncertainty. Do not promise an exact final height from a generic species label. Dwarf forms can still outgrow a small planter, and upright forms can widen with age. Selection should reduce routine corrective pruning rather than depend on it indefinitely.
Exposure is more than hours of sun
Evaluate direct sun by season and time of day. Afternoon sun near reflective pavement can impose more heat and drying than the same number of morning hours. North-facing beds can remain cool and wet; west-facing walls can reflect heat. A nearby tree's future canopy can change exposure after installation, so evaluate the anticipated landscape as well as today's open site.
Shade plants still need enough light for their species, and sun-tolerant plants may fail in poorly drained shaded soil. Wind increases moisture loss and mechanical stress. Coastal salt exposure can damage foliage or roots; choose plants and protection appropriate to the actual exposure. A hardiness rating does not establish tolerance of salt, summer drought, or waterlogged roots.
Group plants with compatible water needs. An established dry-site oak and a moisture-demanding groundcover beneath it can create a management conflict if the entire area is irrigated frequently. A new tree may need establishment watering even when the mature species is drought adapted. Separate temporary establishment needs from the intended long-term hydrozone.
Match form to function
For a hedge, consider branching density, response to pruning, mature width, winter foliage, and access for maintenance. For a screen, consider the height at which privacy is needed and the time to reach it. A tree with a clear trunk may shade an upper story but leave a ground-level sightline open. Layered shrubs may achieve privacy sooner but require more horizontal space.
Groundcovers need enough vigor to cover soil without overwhelming adjacent plants. Specify establishment spacing separately from mature spread. Closer planting can give faster coverage but increases stock and maintenance costs and may encourage competition. A spreading plant can reduce erosion only after adequate cover and rooting develop; use temporary erosion controls while it establishes.
Street corners, driveways, pathways, and playgrounds impose visibility and user-safety constraints. Avoid plants that will block a required sight triangle or narrow a path. Thorns, brittle limbs, messy fruit, or toxic plant parts may be unsuitable for a particular use, but evaluate actual risk and jurisdictional requirements rather than ban an entire plant category universally.
Placement example
Suppose a bed is six feet wide beside a sidewalk, and a selected shrub's expected mature spread is eight feet. Centering the plant leaves about one foot of crown extending beyond each edge before any margin for access. Repeated shearing could preserve clearance but changes maintenance and form. A narrower cultivar, a wider bed, or relocation addresses the cause more effectively.
For a row intended to form a continuous screen, spacing at mature spread gives a different closure time from spacing much closer. If a cultivar typically spreads five feet, five-foot centers leave crowns meeting around maturity, while three-foot centers produce earlier crowding. The designer must balance initial appearance, expected growth, disease airflow, and replacement access rather than treat one spacing ratio as universally correct.
Check root and trunk relationships as well. Mulch should not contact the trunk, irrigation should wet the developing root zone, and mowing access should not invite repeated bark injury. Protect existing trees from grade changes and compaction when locating new plantings. A visually balanced arrangement can still be horticulturally poor if its installation damages the retained tree's roots.
Verify and communicate the choice
Use a selection matrix with function, identity, mature dimensions, sun, soil, water, hardiness, and maintenance. Resolve conflicts before purchasing. Confirm that any substitution retains the specified role; a similar flower color does not make a moisture-loving plant equivalent to a drought-adapted one. Explain expected growth and maintenance to the owner so the installed size is not mistaken for its final dimensions.
Reference table
- Intended use Selection criteria
- Screen Privacy height, density, winter foliage, width
- Shade tree Canopy, root space, clearance, seasonal behavior
- Groundcover Spreading habit, exposure, containment, establishment
- Path edge Mature clearance, visibility, maintenance access