Study guide

Nursery stock, root flares, and planting depth

Oregon Landscape Contractor License Study Guide 2026

Track your progress as you read

Finished sections get a check mark.

1 1. Licensing and business: 1

Exam structure, reference use, and license routes Oregon jurisdiction, license phases, and eligibility Bonds, insurance, and financial responsibility

2 2. Licensing and business: 2

Employee status, paid work, and payroll calculations Hiring, breaks, sick time, and workplace protections Contracts, cancellation, guarantees, and liens

3 3. Licensing and business: 3

LCP supervision and clear project communication Direct costs and overhead allocation Margin, markup, changes, and job costing

4 4. Site safety and utilities

Excavation safety and hazard controls Oregon 811 notices and utility protection

5 5. Soil science and site preparation: 1

Soil texture, structure, and pore space Density, regional profiles, and soil water Soil pH, diagnosis, and exchange capacity

6 6. Soil science and site preparation: 2

Amendments and fertilizer calculations Compaction, decompaction, and topsoil protection Topsoil placement, finish grades, and weeds

7 7. Plants, turf, and establishment: 1

Planting plans, stock sizes, and quantity takeoffs Botanical identification, plant types, and growth habits Mature size, landscape use, and exposure decisions

8 8. Plants, turf, and establishment: 2

Hardiness, microclimates, and plant names Native plant choices and invasive plants Nursery stock, root flares, and planting depth

9 9. Plants, turf, and establishment: 3

Backfill, staking, and mulch Turf species, mixtures, and site suitability Seed, sod, and establishment calculations

10 10. Plants, turf, and establishment: 4

Pruning and integrated pest management Pest diagnosis, weeds, and pesticide credentials

11 11. Paving and concrete: 1

Pavement foundations, drainage, and excavation Separation fabric, aggregate, and compaction Bedding, restraints, and square layout

12 12. Paving and concrete: 2

Paver laying, cuts, patterns, and joint fill Natural stone and rigid or flexible setting Concrete mixture, placement, and finishing

13 13. Paving and concrete: 3

Concrete joints and curing

14 14. Walls and exterior structures: 1

Segmental wall systems and foundations Wall drainage, backfill, and geogrid Earth pressure, stone walls, and footings

15 15. Walls and exterior structures: 2

Masonry reinforcement, wall permits, and failure Lumber dimensions, grades, fasteners, and finishing Treated lumber and outdoor exposure

16 16. Walls and exterior structures: 3

Wood durability, hardware, and post geometry Fences, decks, ledgers, and arbors Landscape steps, stairs, and safe transitions

17 17. Walls and exterior structures: 4

Low-voltage lighting design, wiring, and commissioning Water features, pumps, liners, and water quality

18 18. Design, grading, and drainage: 1

Landscape design, circulation, and coordinated details Surveying, benchmarks, and elevation checks Planting on roofs, decks, and other structures

19 19. Design, grading, and drainage: 2

Drawing sets, legends, and scale Contours, spot elevations, and benchmarks Slope ratios, pitch, and foundation fall

20 20. Design, grading, and drainage: 3

Earthwork, accessible routes, and swales Water sources and French drains Inlets, conveyance, cleanouts, and outlets

21 21. Design, grading, and drainage: 4

Bioretention sizing, media, and plants Swales and current DEQ erosion controls

22 22. Irrigation design and operation: 1

Irrigation site survey and available water Hydrozones and plant-based irrigation design Sprinkler layout, arcs, and zone flow accounting

23 23. Irrigation design and operation: 2

Irrigation symbols, plans, and material takeoffs Pressure, elevation, friction, and budgets Sprinkler types, pressure, and coverage

24 24. Irrigation design and operation: 3

Matched precipitation and runtime formulas Drip irrigation, filtration, and wetted root volume Pipe materials, bore, velocity, and valves

25 25. Irrigation design and operation: 4

Valve service, wiring, and smart controls Controller circuits and electrical troubleshooting Plant culture and root-zone watering decisions

26 26. Irrigation design and operation: 5

Evapotranspiration, soil depletion, and runtime Catch-can audits and irrigation repair diagnosis Installation, testing, winterization, and startup

27 27. Backflow and potable protection: 1

Cross-connections, hazards, and reverse flow Air gaps and physical potable-water separation Vacuum breakers, checks, and RP assemblies

28 28. Backflow and potable protection: 2

Potable, irrigation, and reclaimed-water piping Backflow assembly selection and hydraulic cases Backflow installation, winter care, and reports

Nursery stock, root flares, and planting depth

Key Takeaways Explain This Topic AI

Stock type changes handling and seasonal considerations.

Locate the root flare before setting planting depth.

Support the root ball on firm soil and correct unsuitable circling roots.

Last updated: October 2026

Note

Root-flare location, root-ball condition, hole preparation, and establishment care strongly affect planting success. Inspect stock before planting and use current ANSI A300 specifications where applicable. Correcting a buried flare requires finding the actual roots rather than relying on the nursery soil line.

Nursery Stock Types and Seasonal Planting Windows in the PNW

Landscape contractors work with three distinct categories of nursery stock, each requiring specialized handling, storage, and installation schedules:

Comparison of Stock Types and Windows

Bare-Root (BR) Stock: Field-grown deciduous trees and shrubs harvested while dormant with all soil washed or shaken from the roots. Extremely cost-effective and lightweight, but exceptionally vulnerable to desiccation. Roots must be kept continuously moist (packed in damp shingle tow, sawdust, or hydrogel) and protected from freezing temperatures. The planting window in Western Oregon is strictly confined to the dormant season (late November through March) before bud swell.

Ball and Burlap (B&B) Stock: Field-grown trees dug mechanically or by hand with a cohesive ball of native field soil, wrapped in burlap, and bound with sisal or synthetic twine within an open steel wire basket. Preserves approximately 10% to 20% of the tree's original root system. Best planted from late autumn through early spring (October through April) while the canopy is dormant or semi-dormant. B&B stock is extremely heavy and must always be lifted by the root ball or wire basket—never by the trunk.

Containerized Stock: Plants grown entirely within plastic containers (#1, #5, #15, #25, or larger) in artificial, high-porosity potting media (composted fir bark, peat moss, pumice, or perlite). Retains 100% of the roots formed within the pot. Although container stock can technically be planted year-round if supplemental irrigation is provided, the optimal planting window in the Pacific Northwest is autumn (October through November) . Warm autumn soils (50°F to 60°F) and seasonal rains allow roots to establish throughout the mild winter before summer drought arrives.

Excavation Geometry and Root Flare Identification

The physical dimensions and geometry of the planting hole dictate how rapidly roots expand into native surrounding soils:

Dimensional Standards

Hole Width: Must be excavated 2 to 3 times the diameter of the root ball or container . More than 90% of a tree's absorbing feeder roots occupy the top 12 to 18 inches of soil and grow outward horizontally. Loosening soil in a wide radius eliminates physical boundary resistance, allowing young lateral roots to penetrate quickly into native ground.

Hole Depth: The depth of the hole must strictly equal the distance from the bottom of the root ball to the root flare, or 1 to 2 inches shallower . The bottom of the pit must remain firm, undisturbed native soil . If the hole is excavated too deep and backfilled with loose soil, the weight of the tree and water settling will cause the plant to sink over time.

Sides of the Hole: Excavation sides should be sloped outward (saucer-shaped) rather than vertical. In heavy clay soils, smooth pit walls glazed by backhoe or auger buckets must be scarified with a hand spade or pick to break the smooth boundary layer and allow root egress.

Locating the Root Flare (Trunk Flare)

The root flare (or trunk flare) is the distinct basal transition zone where the trunk widens and the first primary structural lateral roots branch outward into the soil. In modern container and B&B nursery production, soil or potting media is frequently mounded around the stem during mechanical cultivation or up-potting, burying the true root flare 2 to 6 inches below the surface .

Caution

Find the actual root flare before setting planting depth. Extra nursery soil can conceal it. Deep planting can reduce root oxygen, keep trunk tissue persistently wet, and contribute to decay and girdling roots. Inspect root defects and drainage rather than predict a fixed failure date or assume all buried trees respond identically.

Root Ball Preparation and Remediation

Nursery production methods inevitably generate root system defects that must be mechanically corrected prior to backfilling:

Containerized Stock Remediation

When container-grown roots reach the smooth plastic container wall, they deflect horizontally and circle the perimeter, forming a dense, tangled cage. Left untreated, circling roots will never grow outward into native soil.

Root Shaving: Using a sharp hand saw, spade, or heavy pruning knife, shave off the outer 1/2 to 1 inch of the root ball's entire perimeter and bottom. This removes the outer layer of circling roots, exposing healthy radial root tips.

Box Cutting (Slicing): For smaller stock (#1 to #5 containers), make 4 to 6 vertical slices approximately 1 inch deep from the top to the bottom of the root ball, and slice an "X" across the base. Tease out the sliced root ends radially outward.