Study guide

Hardiness, microclimates, and plant names

Oregon Landscape Contractor License Study Guide 2026

Track your progress as you read

Finished sections get a check mark.

1 1. Licensing and business: 1

Exam structure, reference use, and license routes Oregon jurisdiction, license phases, and eligibility Bonds, insurance, and financial responsibility

2 2. Licensing and business: 2

Employee status, paid work, and payroll calculations Hiring, breaks, sick time, and workplace protections Contracts, cancellation, guarantees, and liens

3 3. Licensing and business: 3

LCP supervision and clear project communication Direct costs and overhead allocation Margin, markup, changes, and job costing

4 4. Site safety and utilities

Excavation safety and hazard controls Oregon 811 notices and utility protection

5 5. Soil science and site preparation: 1

Soil texture, structure, and pore space Density, regional profiles, and soil water Soil pH, diagnosis, and exchange capacity

6 6. Soil science and site preparation: 2

Amendments and fertilizer calculations Compaction, decompaction, and topsoil protection Topsoil placement, finish grades, and weeds

7 7. Plants, turf, and establishment: 1

Planting plans, stock sizes, and quantity takeoffs Botanical identification, plant types, and growth habits Mature size, landscape use, and exposure decisions

8 8. Plants, turf, and establishment: 2

Hardiness, microclimates, and plant names Native plant choices and invasive plants Nursery stock, root flares, and planting depth

9 9. Plants, turf, and establishment: 3

Backfill, staking, and mulch Turf species, mixtures, and site suitability Seed, sod, and establishment calculations

10 10. Plants, turf, and establishment: 4

Pruning and integrated pest management Pest diagnosis, weeds, and pesticide credentials

11 11. Paving and concrete: 1

Pavement foundations, drainage, and excavation Separation fabric, aggregate, and compaction Bedding, restraints, and square layout

12 12. Paving and concrete: 2

Paver laying, cuts, patterns, and joint fill Natural stone and rigid or flexible setting Concrete mixture, placement, and finishing

13 13. Paving and concrete: 3

Concrete joints and curing

14 14. Walls and exterior structures: 1

Segmental wall systems and foundations Wall drainage, backfill, and geogrid Earth pressure, stone walls, and footings

15 15. Walls and exterior structures: 2

Masonry reinforcement, wall permits, and failure Lumber dimensions, grades, fasteners, and finishing Treated lumber and outdoor exposure

16 16. Walls and exterior structures: 3

Wood durability, hardware, and post geometry Fences, decks, ledgers, and arbors Landscape steps, stairs, and safe transitions

17 17. Walls and exterior structures: 4

Low-voltage lighting design, wiring, and commissioning Water features, pumps, liners, and water quality

18 18. Design, grading, and drainage: 1

Landscape design, circulation, and coordinated details Surveying, benchmarks, and elevation checks Planting on roofs, decks, and other structures

19 19. Design, grading, and drainage: 2

Drawing sets, legends, and scale Contours, spot elevations, and benchmarks Slope ratios, pitch, and foundation fall

20 20. Design, grading, and drainage: 3

Earthwork, accessible routes, and swales Water sources and French drains Inlets, conveyance, cleanouts, and outlets

21 21. Design, grading, and drainage: 4

Bioretention sizing, media, and plants Swales and current DEQ erosion controls

22 22. Irrigation design and operation: 1

Irrigation site survey and available water Hydrozones and plant-based irrigation design Sprinkler layout, arcs, and zone flow accounting

23 23. Irrigation design and operation: 2

Irrigation symbols, plans, and material takeoffs Pressure, elevation, friction, and budgets Sprinkler types, pressure, and coverage

24 24. Irrigation design and operation: 3

Matched precipitation and runtime formulas Drip irrigation, filtration, and wetted root volume Pipe materials, bore, velocity, and valves

25 25. Irrigation design and operation: 4

Valve service, wiring, and smart controls Controller circuits and electrical troubleshooting Plant culture and root-zone watering decisions

26 26. Irrigation design and operation: 5

Evapotranspiration, soil depletion, and runtime Catch-can audits and irrigation repair diagnosis Installation, testing, winterization, and startup

27 27. Backflow and potable protection: 1

Cross-connections, hazards, and reverse flow Air gaps and physical potable-water separation Vacuum breakers, checks, and RP assemblies

28 28. Backflow and potable protection: 2

Potable, irrigation, and reclaimed-water piping Backflow assembly selection and hydraulic cases Backflow installation, winter care, and reports

Hardiness, microclimates, and plant names

Key Takeaways Explain This Topic AI

The 2023 hardiness map describes average annual extreme minimum temperature.

Exposure, drainage, wind, and heat still affect selection.

Botanical and cultivar names resolve common-name ambiguity.

Last updated: October 2026

Note

Core Principle: Successful landscape contracting in Oregon requires matching plant physiology to localized regional climates and site-specific microclimates. From the mild, moisture-rich marine terraces of the Pacific Coast to the arid, freeze-prone high desert of Central and Eastern Oregon, plant survival hinges on precise horticultural knowledge, correct binomial specification, and strict management of invasive species.

Hardiness, climate, and regional selection

The 2023 USDA Plant Hardiness Zone Map estimates average annual extreme minimum temperature. It does not describe summer heat, frost-free season, rainfall, soil drainage, or a plant's complete suitability. Adjacent ZIP codes can contain several zones, especially where elevation and cold-air drainage vary. Use the actual site on the current map rather than memorize obsolete citywide zone ranges.

Zones are ten-degree Fahrenheit bands, divided into five-degree a and b half-zones. Zone 8a represents an average annual extreme minimum of 10–15°F; 8b is 15–20°F. A plant rated only to Zone 9 may be vulnerable at a Zone 8a site, but zone compatibility alone does not guarantee survival. Wet winter soil can injure a drought-adapted plant that tolerates the recorded minimum temperature.

Western maritime Oregon commonly has wet winters and comparatively dry summers; central and eastern locations can have colder winters, lower humidity, strong sun, and shorter growing seasons. Coastal wind and salt exposure create additional constraints. Evaluate exposure, available water, root depth, soil chemistry, mature size, and maintenance together. A protected south wall may warm sooner and trigger early growth, increasing damage from a later frost.

Native plants are adapted to particular habitats rather than automatically drought tolerant. Western redcedar and other moisture-associated species can struggle on hot dry fill; a species from a dry open habitat may fail in a winter-saturated depression. Match origin and ecological requirements to the actual microclimate. USDA 2023 hardiness map is a screening tool, while the site's soil and water observations complete the selection.

Microclimates, Aspect, and Sun Exposure Dynamics

While USDA hardiness zones provide broad geographic guidelines, localized microclimates determine whether a specific planting succeeds or fails on a job site. A microclimate is the distinct climatic condition of a small, localized area created by topography, exposure, structures, and surrounding vegetation.

Solar Exposure Categories

Contractors and estimators must evaluate daily direct solar duration before specifying plant material:

Full Sun: Locations receiving 6 or more hours of direct, unfiltered sunlight daily , particularly during peak midday hours (10:00 AM to 4:00 PM). Needed by many species; confirm the actual plant and site requirement.

Partial Sun / Partial Shade: Locations receiving 3 to 6 hours of direct sunlight daily . Morning sun combined with afternoon shade is optimal for species vulnerable to foliar heat scorch (e.g., Japanese Maples, Rhododendrons, and Hydrangeas).

Full Shade: Locations receiving less than 3 hours of direct sunlight daily , or sites under dense, continuous woodland canopy receiving only dappled, indirect light. Soil in full shade remains cooler and retains moisture significantly longer than sunny borders.

Site-Specific Microclimatic Factors

Rain Shadow Effects: Major topographic barriers cast rain shadows. While the Coast Range creates a moderate rain shadow across parts of the northern Willamette Valley, the Cascade Mountain crest creates a profound rain shadow across Central and Eastern Oregon, reducing precipitation from 80+ inches on western slopes to less than 10 inches east of the peaks.

Columbia River Gorge Winds: Winter arctic high-pressure systems east of the Cascades force sub-freezing air through the Columbia River Gorge into the Portland metropolitan area. These sustained 40–60 mph winds cause severe physiological drought (winter burn) on broadleaf evergreens: leaves transpire moisture rapidly under dry winds, while frozen soil prevents root uptake, desiccating foliage.

Frost Pockets: Cold air is denser than warm air; on clear, calm nights, cold air drains downslope and pools in low swales, valley basins, and against solid fences or retaining walls. These "frost pockets" can be 10°F to 15°F colder than surrounding hillsides, killing tender shoots and buds even within a nominally mild hardiness zone.

Radiant Thermal Mass: South- and west-facing masonry walls, stone patios, and asphalt drives absorb high solar radiation and re-radiate heat overnight. While this creates a warm micro-pocket that allows marginally hardy plants to overwinter, it dramatically increases summer evapotranspiration stress, causing foliar burn on shade-adapted plants.

Botanical Nomenclature and Plant Classification

To prevent costly specification errors, landscape contractors must operate using standard botanical binomial nomenclature governed by the International Code of Nomenclature. Developed by Carl Linnaeus, binomial nomenclature assigns each plant a two-part scientific name: Botanical Name = Genus + specific epithet + ’Cultivar’ (or var. variety) \text{Botanical Name} = \textit{Genus} + \textit{specific epithet} + \text{'Cultivar' (or } \textit{var. } \text{variety)} Botanical Name = Genus + specific epithet + ’Cultivar’ (or var. variety)

Genus (plural: Genera): The first word, capitalized and italicized (e.g., Acer ). Identifies a group of closely related species sharing fundamental structural and floral characteristics.

Specific Epithet: The second word, lowercase and italicized (e.g., circinatum ). Distinguishes the specific species within the genus.

Cultivar (Cultivated Variety): A distinct, cultivated selection maintained with its defining selected traits. Capitalized, set in single quotation marks, and non-italicized (e.g., Acer circinatum 'Pacific Fire').

Botanical Variety ( var. ): A naturally occurring, stable geographic variation, denoted in lowercase Roman text followed by an italicized variety name (e.g., Pseudotsuga menziesii var. glauca ).

Why Common Names Fail Landscape Contractors

Common names are regionally variable, colloquial, and legally unspecific. Relying on common names in bids, contracts, and nursery purchase orders leads to severe financial and legal disputes.

Warning

The "Cedar" Specification Trap: The common name "cedar" is applied across several distinct genera in the Pacific Northwest, each possessing radically different cultural requirements:

Western Redcedar ( Thuja plicata ): Cupressaceae family. Moist, alluvial, acidic soils; high shade tolerance; intolerant of severe drought.

Incense Cedar ( Calocedrus decurrens ): Cupressaceae family. Drought-hardy native; thrives in dry, sunny, rocky soils.

Port Orford Cedar ( Chamaecyparis lawsoniana ): False cypress. Extremely vulnerable to the lethal soil-borne pathogen Phytophthora lateralis .

True Cedar ( Cedrus spp., e.g., Cedrus deodara ): Pinaceae family. Species occur in Mediterranean and Himalayan regions; check species hardiness and provide appropriate drainage rather than assume all true cedars have identical needs.

A contract specifying only "cedar" provides no legal clarity and risks total planting failure if the wrong genus is installed.