Study guide

Backfill, staking, and mulch

Oregon Landscape Contractor License Study Guide 2026

Track your progress as you read

Finished sections get a check mark.

1 1. Licensing and business: 1

Exam structure, reference use, and license routes Oregon jurisdiction, license phases, and eligibility Bonds, insurance, and financial responsibility

2 2. Licensing and business: 2

Employee status, paid work, and payroll calculations Hiring, breaks, sick time, and workplace protections Contracts, cancellation, guarantees, and liens

3 3. Licensing and business: 3

LCP supervision and clear project communication Direct costs and overhead allocation Margin, markup, changes, and job costing

4 4. Site safety and utilities

Excavation safety and hazard controls Oregon 811 notices and utility protection

5 5. Soil science and site preparation: 1

Soil texture, structure, and pore space Density, regional profiles, and soil water Soil pH, diagnosis, and exchange capacity

6 6. Soil science and site preparation: 2

Amendments and fertilizer calculations Compaction, decompaction, and topsoil protection Topsoil placement, finish grades, and weeds

7 7. Plants, turf, and establishment: 1

Planting plans, stock sizes, and quantity takeoffs Botanical identification, plant types, and growth habits Mature size, landscape use, and exposure decisions

8 8. Plants, turf, and establishment: 2

Hardiness, microclimates, and plant names Native plant choices and invasive plants Nursery stock, root flares, and planting depth

9 9. Plants, turf, and establishment: 3

Backfill, staking, and mulch Turf species, mixtures, and site suitability Seed, sod, and establishment calculations

10 10. Plants, turf, and establishment: 4

Pruning and integrated pest management Pest diagnosis, weeds, and pesticide credentials

11 11. Paving and concrete: 1

Pavement foundations, drainage, and excavation Separation fabric, aggregate, and compaction Bedding, restraints, and square layout

12 12. Paving and concrete: 2

Paver laying, cuts, patterns, and joint fill Natural stone and rigid or flexible setting Concrete mixture, placement, and finishing

13 13. Paving and concrete: 3

Concrete joints and curing

14 14. Walls and exterior structures: 1

Segmental wall systems and foundations Wall drainage, backfill, and geogrid Earth pressure, stone walls, and footings

15 15. Walls and exterior structures: 2

Masonry reinforcement, wall permits, and failure Lumber dimensions, grades, fasteners, and finishing Treated lumber and outdoor exposure

16 16. Walls and exterior structures: 3

Wood durability, hardware, and post geometry Fences, decks, ledgers, and arbors Landscape steps, stairs, and safe transitions

17 17. Walls and exterior structures: 4

Low-voltage lighting design, wiring, and commissioning Water features, pumps, liners, and water quality

18 18. Design, grading, and drainage: 1

Landscape design, circulation, and coordinated details Surveying, benchmarks, and elevation checks Planting on roofs, decks, and other structures

19 19. Design, grading, and drainage: 2

Drawing sets, legends, and scale Contours, spot elevations, and benchmarks Slope ratios, pitch, and foundation fall

20 20. Design, grading, and drainage: 3

Earthwork, accessible routes, and swales Water sources and French drains Inlets, conveyance, cleanouts, and outlets

21 21. Design, grading, and drainage: 4

Bioretention sizing, media, and plants Swales and current DEQ erosion controls

22 22. Irrigation design and operation: 1

Irrigation site survey and available water Hydrozones and plant-based irrigation design Sprinkler layout, arcs, and zone flow accounting

23 23. Irrigation design and operation: 2

Irrigation symbols, plans, and material takeoffs Pressure, elevation, friction, and budgets Sprinkler types, pressure, and coverage

24 24. Irrigation design and operation: 3

Matched precipitation and runtime formulas Drip irrigation, filtration, and wetted root volume Pipe materials, bore, velocity, and valves

25 25. Irrigation design and operation: 4

Valve service, wiring, and smart controls Controller circuits and electrical troubleshooting Plant culture and root-zone watering decisions

26 26. Irrigation design and operation: 5

Evapotranspiration, soil depletion, and runtime Catch-can audits and irrigation repair diagnosis Installation, testing, winterization, and startup

27 27. Backflow and potable protection: 1

Cross-connections, hazards, and reverse flow Air gaps and physical potable-water separation Vacuum breakers, checks, and RP assemblies

28 28. Backflow and potable protection: 2

Potable, irrigation, and reclaimed-water piping Backflow assembly selection and hydraulic cases Backflow installation, winter care, and reports

Backfill, staking, and mulch

Key Takeaways Explain This Topic AI

Remove synthetic wrapping and constricting ties.

Avoid an isolated highly amended pocket in restrictive soil.

Stake only when stability requires support and inspect ties frequently.

Keep mulch away from the trunk and excessive depth.

Last updated: October 2026

Balled-and-burlapped stock

Identify the root flare before setting depth; nursery soil piled over the flare is not part of the intended planting depth. Set the root ball on firm ground and handle it without pulling on the trunk. Remove synthetic wrapping and twine that will not decompose. Remove natural burlap, wire, and other packaging as appropriate to the stock and accepted arboricultural installation specification, with particular attention to the top and sides and material that can girdle the trunk. Stabilize a fragile ball during removal rather than destroy its roots.

Do not assume every brown fabric is biodegradable burlap. Check the material and remove constricting ties. A basket left near the trunk flare can impede inspection and future growth. Root-ball quality, intact structural roots, and correct depth matter more than preserving a neat-looking nursery package.

Backfilling, drainage, and soil interfaces

A persistent error in landscape installation is amending the backfill soil placed into the planting pit. Traditional recommendations to mix peat moss, compost, manure, or sand with the excavated soil have been thoroughly refuted by modern arboricultural science.

The Bathtub Effect Explained

In the heavy silty clay loams common throughout Western Oregon (e.g., Jory, Woodburn, and Dayton series), digging a hole and backfilling with loose, porous amended soil creates a severe hydraulic interface:

Winter Drowning: Water moving through the landscape follows the path of least resistance, flowing rapidly into the loose, porous planting hole. However, because water movement through a restrictive native layer may be much slower of the pit, the hole fills with water like a ceramic bathtub. Roots drown in stagnant, anaerobic conditions.

Root Binding: During dry summer months, tree roots readily explore the fluffy, amended backfill but refuse to penetrate across the sharp textural boundary into the dense native clay. The tree becomes functionally pot-bound inside its own planting hole.

The Professional Standard: Generally backfill with suitable excavated soil rather than create a highly amended isolated pocket. If the native soil is unsuitable (e.g., compacted construction debris or severe chemical contamination), excavate and replace the soil across the entire landscape bed rather than amending individual planting pits.

Eliminating Air Pockets Without Soil Compaction

Never stomp heavily on the backfill with work boots, as this crushes soil aggregates and induces severe compaction. Instead, fill the pit one-half to two-thirds full of native soil, gently tamp by hand, and flood the hole thoroughly with water. Allow the water to settle the soil into voids naturally, complete backfilling to grade, and water thoroughly a second time. Build a 3- to 4-inch-high earthen ring berm at the perimeter of the root ball to form a temporary watering saucer that directs irrigation into the root zone.

Tree Staking and Guying Protocols

Staking is not a universal requirement for newly planted trees. In fact, improper staking causes more structural harm than good.

When Staking is Required vs. Prohibited

Do NOT Stake: Small-to-medium container-grown trees with sturdy, well-proportioned trunks installed on sheltered residential or commercial sites.

Consider staking when stability requires it: Some bare-root trees; large conifers with heavy foliage installed in high-wind zones; trees planted on steep slopes; tall top-heavy standard trees; or installations in high-traffic public corridors subject to pedestrian vandalism.

Staking Execution Rules

Stake Location: Drive two or three wooden or steel stakes into undisturbed native ground outside the perimeter of the root ball . Never drive stakes through the root ball, which severs primary structural roots.

Tie Materials: Use wide (1.5 to 2 inches), smooth, flexible synthetic webbing, rubber straps, or canvas ties. Never use bare wire, garden hose over wire, or thin nylon cord, which cut into delicate bark.

Attachment Height: Fasten ties at the lowest point on the trunk that keeps the tree upright (typically the lower one-third of the trunk, rarely higher than two-thirds).

The Critical Role of Trunk Sway: Ties must have sufficient slack to allow the trunk to sway 2 to 3 inches in the wind. Trunk movement supports development of taper and strength. Rigid staking creates a weak, pencil-like trunk that buckles when stakes are removed.

Inspection and removal: Inspect ties frequently and remove support as soon as the root system is stable, commonly after the first growing season. Neglected ties girdle trunks, cutting off downward carbohydrate transport in the phloem and killing the tree.

Mulching Standards and Eradication of "Mulch Volcanoes"

Mulching is one of the most beneficial cultural practices for plant establishment, but improper application is an epidemic in commercial landscaping.

Professional Mulching Standards

Material: Coarse organic mulch, such as aged arbor wood chips, composted yard debris, or shredded Douglas-fir/hemlock bark. Coarse wood chips are superior to fine bark dust because they resist crusting, allow superior air and water exchange, and support beneficial mycorrhizal fungi.

Application Depth: Maintain a uniform depth of 2 to 3 inches (up to 4 inches for very coarse wood chips). Excessively deep mulch inhibits soil gas exchange and intercepts light rains, preventing moisture from reaching the soil.

The Root Flare Buffer: Mulch must be pulled back 3 to 4 inches away from the trunk base , leaving the root flare fully exposed to air and light.

Warning

The "Mulch Volcano" Hazard: Piling mulch high against the trunk base in a volcano cone is a severe workmanship defect. It traps moisture against trunk bark, causing bark decay (maceration), providing dark cover for cambium-chewing rodents, and inducing adventitious roots that wrap around the buried trunk to form lethal stem-girdling roots.